128x128, General 1.5inch OLED display Module
We have ✅ 5 available of the WS-13992 in our Sydney warehouse. An extra 10 units available with a short lead time.
1.5inch OLED display Module, 128x128 pixels, 16 gray scale, SPI/I2C interface
Overview
This is a general OLED display Module, 1.5inch diagonal, 128x128 pixels, 16 gray scale, with embedded controller, communicating via SPI or I2C interface.
Features
- 128x128 high resolution
- 16 gray scale, better display effect
- Supports SPI or I2C interface, configured via onboard resistor
- Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32)
Specifications
- Driver: 1327
- Interface: SPI / I2C
- Display color: White
- Gray scale: 16
- Resolution: 128x128 (most other competitive products are typically 128x64)
- Viewing angle: >160°
- Operating voltage: 3.3V / 5V
- Dimension: 44.5 x 37 (mm)
Interface
There are two available drive interfaces for this OLED module: 4-wire SPI and I2C:
Dimensions
Development Resources
Note: the 0.96inch OLED consists of 1/4 yellow upper section and 3/4 blue lower section, not a regular dual-color display.
- 1.5inch OLED Module x1
- PH2.0 7Pin x1
1
2
The 128x128, General 1.5inch OLED display Module appears in the following collections:
SKU WS-13992
by Waveshare
