All Products

SKU: AF-640

After months of searching, we finally have what we consider to be the ultimate conductive thread. It's thin, strong, smooth, and made completely of 316L stainless steel. Once you start working with this thread you'll quickly agree its optimal for any wearables work!  This thread is 2...

SKU: AF-603

This 316L stainless steel conductive yarn sits between a thick thread and a thin yarn in weight. Its high conductivity and soft, flexible texture make it particularly well-suited for making touchscreen-compatible gloves and other projects that require capacitive touch conductivity. Sew a few sti...

SKU: AF-1362

This breakout board is the simplest way to create a project with mutiple capacitive touch sensors. No microcontroller is required here - just power with 1.8 to 5.5VDC and connect up to 5 conductive pads to the 5 left-hand pins. When a capacitive load is detected (e.g. a person touches one of the ...

SKU: AF-1374

This breakout board is the simplest way to create a project with a single "momentary" capacitive touch sensor. No microcontroller is required here - just power with 1.8 to 5.5VDC and touch the pad to activate the sensor.When a capacitive load is detected (e.g. a person touches the sensor-pad area...

SKU: AF-1375

This breakout board is the simplest way to create a project with a single "toggle" capacitive touch sensor. No microcontroller is required here - just power with 1.8 to 5.5VDC and touch the pad to activate the sensor.This sensor is a toggle output type: touch-on then touch-off. That means that...

SKU: AF-181

Standard HD44780 LCDs are useful for creating standalone projects. 16 characters wide, 2 rows White text on blue background Connection port is 0.1" pitch, single row for easy breadboarding and wiring Pins are documented on the back of the LCD to assist in wiring it up Single LED backlight inc...

SKU: AF-198

Standard HD44780 LCDs are useful for creating standalone projects. 20 characters wide, 4 rows White text on blue background Connection port is 0.1" pitch, single row for easy breadboarding and wiring Single LED backlight with a resistor included, you can power it directly from 5V. If it's too bri...

SKU: LB-LR0018

A compact reed switch module that closes its circuit when a magnetic field is present. Inside the glass envelope, a pair of ferromagnetic metal contacts come together when a magnet is brought close, and spring apart when the magnet is removed — providing a simple, contactless switching mechanism....

SKU: LB-SERVO-3003

High impact plastic is designed to withstand minor crashes and the effects of model fuelThrough-the-hole Circuit Board Plating - Eliminates the need for wires or leadsHeavy Duty Output Shaft - Designed not to break, and offers versatility when installing the servo hornNylon gearsSpecifications...

SKU: AF-1142

This high-torque standard servo now comes in a metal-gear flavor, for extra-high torque (10 kg*cm!) and reliability! It can rotate at least 120 degrees (60 in each direction) with a classic 1.5-2.5ms pulse, but if you can extend your pulses it can go up to about 170 degrees - it varies a bit serv...

SKU: SF-PRT-10738

These metal hex standoffs raise your development board or proto board off the work surface for protection and airflow. With a #4-40 thread, they fit most boards with standard mounting holes. Specifications Length: 1″ (25.4 mm) Outer Diameter: ¼″ (6.35 mm) Thread: #4-40 Material: Metal Pac...

SKU: SF-PRT-10739

Metal short standoffs: 3/8" long x ¼"OD. Used to get your proto board up off the table. #4-40 thread. Fits all development boards with available holes. Don’t forget the screws! Related below. Note: These are sold as a set of ten.

SKU: SF-PRT-10463

Metal Hex Male/Female standoffs. #4-40 thread with 3/8" shank and 3/16" thread length. Can be stacked to create any length. Pack of 10

SKU: SF-PRT-11796

These nylon standoffs are ¾" long and tapped for a 4-40 screw. These are great for mounting your board in an enclosure, or just getting it up off the table. The black nylon will give your project a very sessy look. Sold in packs of ten. Check below for matching screws.

SKU: SF-PRT-10927

These nylon standoffs are 3/8" long and tapped for a 4-40 screw. These are great for mounting your board in an enclosure, or just getting it up off the table. The black nylon will give your project a very sessy look. Sold in packs of 10. Check below for matching screws.

SKU: SF-PRT-10462

Nylon standoffs for mounting PCBs in enclosures or elevating boards off work surfaces. These ¾" (19mm) long standoffs are tapped for 4-40 screws and sold in a pack of 10. Key Features Nylon Construction – Non-conductive, won't short circuit boards 4-40 Thread – Standard tapping for 4-40 screw...

SKU: DF-FIT0385-B

Light'em up! Designed for future lighting professionals and artists, these flexible LED strand can be used for projects from architectural lighting, sign letter lighting, concealed lighting, perimeter lighting amongst many other applications, making any design project much more pecfect and amazin...

SKU: DF-FIT0385-G

Light'em up! Designed for future lighting professionals and artists, these flexible LED strand can be used for projects from architectural lighting, sign letter lighting, concealed lighting, perimeter lighting amongst many other applications, making any design project much more pecfect and ...

SKU: DF-FIT0385-P

Light'em up! Designed for future lighting professionals and artists, these flexible LED strand can be used for projects from architectural lighting, sign letter lighting, concealed lighting, perimeter lighting amongst many other applications, making any design project much more pecfect and ...

SKU: DF-FIT0385-WW

The Star Series LED Strand features 100 warm white LED pixels on a thin, pliable copper wire. Spaced 5cm apart across a 5-metre length, the strand is flexible enough to shape around objects yet sturdy enough to hold its form. Powered via a DC 2.1mm connector at 12V, the strand has a weatherproof...