All Products

SKU: SF-TOL-19761 · MPN: TOL-19761

This spring-loaded diamond drag engraver is made for fine line etching on materials such as composites, metals and glass. Instead of cutting with flutes like a normal endmill, it drags a diamond-coated tip across the surface to create an engraved pattern.Drag engravers are not meant to rotate, so...

SKU: SF-TOL-19762 · MPN: TOL-19762

The MC Etcher is a diamond drag bit for fine line engraving on composites, metals and glass. Instead of cutting with flutes like a normal endmill, it drags a diamond-coated, spring-loaded tip across the surface to create an etched or engraved pattern.Important: drag engravers are not meant to rot...

SKU: SF-TOL-19763 · MPN: TOL-19763

Designed for CNC drag engraving, MC Etcher uses a diamond-coated, spring-loaded tip to etch fine lines into the surface of your material. It is suited to composites, metals and glass, creating an engraved pattern by dragging rather than cutting with flutes like a standard endmill.Important: drag ...

SKU: SF-PRT-25939 · MPN: PRT-25939

Keep your McFly cutter ready for clean, consistent work with this set of replacement inserts. The pack includes four inserts, giving you spares on hand when it is time to refresh the cutter.These inserts are made for McFly cutters and are compatible with either the 1/4 inch or 8 mm shank versions...

SKU: AF-593

The MCP23008 is an I2C 8-bit I/O port expander that adds 8 general-purpose pins to your microcontroller using just two I2C lines (shared with other I2C devices). Each pin can be configured as input, output, or input with internal pull-up, and an external interrupt output notifies you when any inp...

SKU: AF-732

Add another 16 pins to your microcontroller using a MCP23017 port expander. The MCP23017 uses two i2c pins (these can be shared with other i2c devices), and in exchange gives you 16 general purpose pins. You can set each of 16 pins to be input, output, or input with a pullup. There's even t...

SKU: AF-856

The MCP3008 is an 8-channel, 10-bit analogue-to-digital converter (ADC) with an SPI interface. It adds analogue input capability to microcontrollers and microcomputers that lack a built-in ADC — such as the Raspberry Pi — using just four SPI pins. Key Features 8 Analogue Channels – Read up to ...

SKU: AF-5870 · MPN: ADA5870

This compact breakout adds a high-resolution, single-channel ADC to your I2C bus, making it a handy choice for precision differential measurements. It is built around the MCP3421, a simple and low-cost 18-bit ΔΣ converter with adjustable gain, a built-in precision reference voltage, and support f...

SKU: DF-DFR0316

A 4-channel, 18-bit delta-sigma analogue-to-digital converter (ADC) module based on the Microchip MCP3424. This module adds high-accuracy analogue input capability to Raspberry Pi, Arduino, and other microcontroller platforms over I2C. The onboard programmable gain amplifier (PGA) allows the mod...

SKU: AF-935

The MCP4725 breakout board provides a 12-bit digital-to-analogue converter (DAC) over I2C. Send a digital value and the VOUT pin outputs the corresponding analogue voltage — ideal for generating waveforms, adjustable bias points, or anywhere you need a true analogue output rather than PWM. The o...

SKU: AF-1782

This I2C digital temperature sensor is one of the more accurate/precise we've ever seen, with a typical accuracy of ±0.25°C over the sensor's -40°C to +125°C range and precision of +0.0625°C. They work great with any microcontroller using standard i2c. There are 3 address pins so you can connect ...

SKU: SF-COM-30155 · MPN: COM-30155

This surface-mount resistor provides a very low resistance value of 220 mOhms with ±1% tolerance, making it useful for compact PCB designs where precise low-value resistance is required.It is a thick film SMD part with two terminations and an automotive AEC-Q200 feature listing. The manufacturer ...

SKU: AF-1531

An RF adapter cable that converts from an MCX jack (female) to a BNC connector, allowing you to connect BNC antennas and equipment to devices with MCX ports. Useful for SDR dongles, RF receivers, and other radio equipment. Key Features MCX Jack to BNC – Adapts MCX female to BNC connector Shor...

SKU: AF-1532

This RF adapter bit is great for anyone doing RF work. If your receiver/transmitter/transceiver has an MCX connector but you really want to tie it to an SMA antenna, this dongle will do the trick!

SKU: DF-DFR0904

This is the first PLC equipment based on the Arduino Technology designed for a professional use. Taking Arduino Mega2560 as its core control chip, the M-Duino PLC has 21 I/Os including 6 analog and digital inputs, 5 digital isolated inputs, 2 interrupt isolated inputs, 3 analog outputs, 5 di...

SKU: DF-DFR0905

This is the first PLC equipment based on the Arduino Technology designed for a professional use. Taking Arduino Mega2560 as its core control chip, the M-Duino PLC has 17 I/Os including 4 analog and digital inputs, 2 interrupt isolated input, 3 analog outputs, 8 digital isolated relay outputs...

SKU: DF-DRI0002

A dual H-bridge DC motor controller based on the L298N driver chip, capable of driving two bi-directional DC motors at up to 2 A per channel. The module accepts a wide motor supply voltage of 4.8–46V and includes high-speed protection diodes and an enlarged heatsink for improved thermal performan...

SKU: DF-SEN0312

The ME007YS is a waterproof ultrasonic distance sensor designed for non-contact liquid level measurement and other distance sensing applications. With an IP67-rated sealed probe and UART serial output, it delivers reliable readings from 28 cm to 450 cm. Operating at 5V with a simple 3-wire conne...

SKU: SF-TOL-14100

This is the big kahuna from Mean Well, a 350W single output switching power supply. This power supply is extremely reliable and beefy, able to output 24VDC at 14.6A. If you’ve been looking for a powerful power supply for your next big project, look no further. We can definitely attest to its dura...

SKU: JU-JU-W-LP334 · MPN: JU-W-LP334

You tried to follow the pattern. You really did. This pin is for anyone who’s ever cut the wrong size, lost their last needle, or discovered that yes, glue absolutely does dry faster when it shouldn't. Perfect for makers with a mouth and a sense of humour. This colourful, gold-back...