All Products

SKU: WS-28945 · MPN: 28945

The Waveshare 15.6" FHD Monitor (C) is a portable touchscreen display with 1920×1080 IPS panel, 10-point capacitive touch, and a built-in 10,000mAh battery providing 3–4 hours of untethered use. The screen is optically bonded to toughened glass with 6H hardness, reducing glare and improving touch...

SKU: DF-DFR1045 · MPN: DFR1045

The DFRobot 15.6" IPS capacitive touch display is designed for single-board computers, mini PCs, and industrial HMI applications. It features a 1920×1080 resolution panel with optical bonding and anti-glare surface treatment, plus 10-point capacitive touch with a separate touch control board usin...

SKU: DF-DFR1178 · MPN: DFR1178

The DFRobot 15.6" Portable 4K OLED Touch Display features a Samsung OLED panel with 3840×2160 resolution, delivering exceptional colour accuracy with 100% DCI-P3 and 100% Adobe RGB coverage. With 829 million self-luminous pixels, a 100,000:1 contrast ratio, and 550 nit peak brightness, it provide...

SKU: DF-DRI0042

The DFRobot DRI0042 is a compact, high-current DC motor driver capable of continuously driving a single motor at up to 15A (with heatsink) from a 12–36V supply. The onboard LM2575 regulator provides a 5V 500mA output for powering an Arduino or other controller, and all control signal inputs inclu...

SKU: WS-25093

A 1.5-inch OLED display module with 128×128 resolution and black/white pixels. Built around the SH1107 driver chip with an ultra-narrow bezel, it supports both 4-wire SPI and I2C interfaces and includes an onboard voltage translator for compatibility with 3.3 V and 5 V microcontrollers. Waveshar...

SKU: SS-321020000

A 1.5 m HDMI male-to-male cable for connecting HDMI-enabled devices such as Raspberry Pi boards, laptops, media players, and game consoles to monitors or TVs. Supports HDMI v1.3 standard. Key Features HDMI Male to HDMI Male – Standard full-size connectors on both ends 1.5 m Length – Convenien...

SKU: LB-SOLAR

A compact micro solar cell rated at 1.5 V and 400 mA (0.65 W peak), ready to use with pre-soldered anode and cathode wires. Its small 80×60 mm form factor makes it well suited for DIY solar projects, battery charging experiments, and powering small loads like motors, LEDs, and light bulbs. Key F...

SKU: TB-MP3480

The Jaycar MP-3480 is a compact, regulated 5VDC 3A switchmode plug pack with a slim profile designed to fit side-by-side on a powerboard. It accepts 100–240VAC 50/60Hz input (AU/NZ 2-pin plug) and comes with 7 interchangeable DC output plugs to suit a wide range of devices. Australian safety app...

SKU: TB-TH2020 · MPN: TH2020

Great for quick and easy low stress repairs to timber, cardboard, paper and many household materials. It is fast, easy and simple to use with trigger controlled glue feed. Uses 7mm diameter glue sticks which are easily fed into the rear of the unit.Includes 2 x 7mm glue sticks. Packs of glue stic...

SKU: LB-LS0199

A colourful assortment of 160 miniature tactile push buttons in eight different colours, neatly organised in a handy storage container. Perfect for adding colour-coded inputs to your electronics projects. Key Features 8 Colours – Red, yellow, orange, blue, green, white, black, and purple 20 B...

SKU: LB-LR0567

A large 1660-point solderless breadboard with plenty of room for advanced prototyping. Features a sturdy black aluminium backing plate, three binding posts for external power connections, and accepts a wide range of wire gauges. Key Features 1660 Tie Points – 1260 across two terminal strips pl...

SKU: DF-FIT0584 · MPN: FIT0584

This flexible silicone-insulated wire pair is made for high-current power wiring in demanding electronics, robotics and motion-control projects. It uses fine tin-plated copper strands for good conductivity and oxidation resistance, with a twisted multi-strand structure that helps reduce signal in...

SKU: EF-EF03012

A compact 16-channel relay module using HUIKE mini-relays, providing optocoupler-isolated control of up to 16 independent circuits. Despite having 16 channels, the board is close in size to a standard 8-channel relay module thanks to the mini-relay form factor. Each channel has a dedicated LED i...

SKU: WS-30795 · MPN: 30795

The Waveshare Modbus POE ETH Relay 16CH is an industrial-grade 16-channel relay module controlled over Ethernet using Modbus RTU or Modbus TCP protocol. It features dual Ethernet ports for cascading, Power over Ethernet (PoE) support to IEEE 802.3af, and optocoupler-isolated relay drivers with fl...

SKU: SF-COM-00299

The Texas Instruments CD74HC4067 is a 16-channel analogue multiplexer/demultiplexer IC. It allows you to route one of 16 analogue signals to a single common pin (or vice versa) using just 4 digital control lines plus an enable pin — effectively expanding a single ADC channel to read from 16 sourc...

SKU: AF-1873

A 16 MHz ceramic resonator with built-in load capacitors, providing a simple clock source for microcontrollers. The 3-pin package has 0.1" (2.54 mm) pin spacing for direct breadboard use — connect the two outer pins to XTAL-in and XTAL-out (the package is symmetric, so either outer pin works for ...

SKU: AF-2215

A 16.000 MHz quartz crystal in the HC49/US short-style package, supplied with two 20pF load capacitors. The crystal provides higher precision than ceramic resonators, with 30 PPM tolerance and 50 PPM stability — suitable for USB timing, long-term timekeeping, and RF/PLL/VCO applications. The bre...

SKU: SF-COM-27917 · MPN: COM-27917

This compact ceramic resonator provides a 16 MHz timing source for microcontroller and digital electronics projects. It functions much like a crystal, while offering a lower-cost option for designs that do not need external load capacitors.The resonator is supplied in a surface-mount package, mak...

SKU: SF-COM-29755 · MPN: COM-29755

This compact crystal oscillator provides a fixed 16MHz clock source in a tiny 2mm x 1.6mm surface-mount package, making it well suited to space-constrained PCB designs.It uses a crystal base resonator with CMOS output and supports a standby power-down function. The oscillator operates across a wi...

SKU: DF-FIT0828

A 16mm telephoto lens designed for the Raspberry Pi High Quality Camera and Jetson Nano 12.3MP camera module. With a narrow field of view and manual focus, this lens is ideal for capturing distant subjects with clarity. The C-mount lens screws directly into the HQ Camera module. A C/CS adapter r...