All Products

SKU: SF-COM-17735 · MPN: COM-17735

This compact yellow LED is a basic surface-mount indicator in the common 1206 package size. It is the same yellow LED used on SparkFun RedBoard products and suits general PCB indicator, status and signalling applications.The LED has a clear, colourless rectangular flat-top lens and is designed fo...

SKU: JU-JU-W-LP208 · MPN: JU-W-LP208

When you find yourself in the think of it again, and nothing is going the way it's supposed to... don't give in, and don't let it beat you.This pin is for when you desperately need that little reminder that this isn't as bad as it looks - hardly anything ever is. Buckle down, and carry on: You've...

SKU: SF-COM-30021 · MPN: COM-30021

This SOT223 surface-mount TRIAC is a planar passivated, four-quadrant device for AC switching applications.Its very sensitive gate allows direct interfacing with logic-level ICs and low-power drivers, helping simplify circuit design and reduce component count.The single TRIAC configuration suits ...

SKU: KZ-ZAP

Show off your inner comic book fan with this stylish and unique "ZAP!" Pop Art Comic Book Enamel Pin! This pin is a perfect way to express your love for comic books in a fashionable way. It features an iconic comic book-style design with vibrant colors and a bold font for an eye-catchin...

SKU: AF-4114

The Zero2Go Omini is a multi-channel power supply board that sits on top of any Raspberry Pi with a 2×20 header. It accepts up to three separate power inputs and automatically selects the one with the highest voltage, making it perfect for projects that need backup power or flexible power source ...

SKU: AF-3298

One can never have enough socks, or USB ports. Add some more USB capability to your Raspberry Pi Zero with the Zero4U! This is a 4-port USB hub for Raspberry Pi Zero, and it can be mounted back-to-back onto a Pi Zero. The 4 pogo pins on the back will connect the PP1, PP6, P...

SKU: PH-TPH-018

The ZeroDock is an all-in-one desktop prototyping dock for your Raspberry Pi Zero. Little brother to ProtoDock, ZeroDock will keep your desk tidy and all of your Raspberry Pi Zero accessories in one place. No more searching for your micro-SD cards, SD adapters, HDMI adapters, USB shims, bread...

SKU: AF-5389

Is your house haunted? Or, rather, are you convinced that your house is haunted but have never been able to prove it since you've never had a camera that integrated with your Raspberry Pi Zero but was still small enough that the ghosts wouldn't notice it?Luckily, the Spy Camera for Rasp...

SKU: AF-3945

Zero Stem? More like, full stream ahead! This is a neat little PCB shim that transforms your Raspberry Pi Zero into a USB dongle! Super handy when you want to share your computer's Internet connection without messing with extraneous adapters, cables, what have you. Works great with our USB Gad...

SKU: LB-GPIO-ZERO

Boost the capabilities of your Raspberry Pi Zero with the Zero W GPIO Card. Enjoy seamless integration with your Pi Zero, allowing for easy access to GPIO ports and further expand your projects.

SKU: EC-CQA23922K002

UZG-01 LAN/POE WIFI USB ZigBee 3.x Coordinator Say Hello, to remake of very popular ZigStar LAN Gateway,most important addition is that is having on board PoE at/af, NEW CC2652P7 chip with support up to 300 Zigbee devices, beautiful enclosure. It's using CC2652P TI chip, the most powerful (+20...

SKU: KI-5625

The ZIP Halo is a circular LED board for the BBC micro:bit featuring 24 individually addressable full-colour ZIP LEDs (WS2812B). Each LED can display a huge spectrum of colours, enabling vibrant rainbow effects, colour mixing, data visualisation, and animated light displays. The board bolts secu...

SKU: KI-5603-ZIP

An add-on pack for the Kitronik Inventor's Kit that introduces individually addressable RGB LEDs (ZIP LEDs) to your BBC micro:bit projects. Through ten guided experiments, you'll learn how to control LED colours, animate light sequences, and make LEDs respond to input from potentiometers and sens...

SKU: DF-DFR1179 · MPN: DFR1179

The ZL9NSQ is a high-performance 3D attitude sensor module that integrates a three-axis accelerometer, a three-axis gyroscope, and a three-axis magnetometer. Featuring a 32-bit ARM Cortex-M4F microprocessor, it utilizes the IMU Motion Engine algorithm along with a 2.4G wireless transceiver and pa...

SKU: SF-COM-21506 · MPN: COM-21506

The ZMOD4450 is a compact gas sensor module for detecting gases associated with food ripening or rotting. It is intended for refrigeration air quality (RAQ) applications such as food storage and shipping, including humid and dusty environments where water spray, condensation or immersion may be p...

SKU: SF-TOL-15040 · MPN: TOL-15040

This flat mill cutter is designed for roughing or machining flat and prismatic parts. It comes as a 2 pack and is suited to small CNC milling jobs where a clean surface finish matters.The cutter is coated with Zirconium Nitride (ZrN), a specialty coating suited to temperature-sensitive materials....

SKU: SF-TOL-15949 · MPN: TOL-15949

This ZrN-coated flat stub cutter is a carbide endmill intended for machining aluminium, with a coating designed to improve finish, tool life and cutting performance compared with an uncoated endmill.The shorter flute length helps provide greater rigidity and reduce chatter while cutting. The shan...

SKU: SF-TOL-15952 · MPN: TOL-15952

This flat single flute end mill is suited to roughing or machining flat and prismatic parts on small CNC machines.It is a good cutter option for working with plastic and aluminium on machines such as the Nomad or Shapeoko.If you are using a Nomad, make sure you have a .25" collet and nut availabl...

SKU: SF-TOL-15953 · MPN: TOL-15953

This ZrN coated single flute flat mill is made for roughing or machining flat and prismatic parts on a desktop CNC.It is a handy cutter for working with plastic and aluminium, and is a good fit for machines such as the Nomad or Shapeoko.If you are using it with a Nomad, make sure you have a compa...

SKU: SF-TOL-15950 · MPN: TOL-15950

This flat mill is made for roughing or machining flat and prismatic parts, giving you a straightforward cutter for CNC work where a flat-bottomed cut is required.It is suited to cutting plastic and aluminium, particularly on small CNC machines such as the Nomad or Shapeoko.If you are using a Shap...