Elecrow
ZigStar UZG-01 - Universal Zigbee Gateway
All Products
New Arrivals
Brands and Manufacturers
Elecrow
Smart Home Controllers
Zigbee & Z-Wave
Connectivity
Prototyping & Wiring
$96.25
|
In stock
UZG-01 LAN/POE WIFI USB ZigBee 3.x Coordinator Say Hello, to remake of very popular ZigStar LAN Gateway,most important addition is that is having on board...
Get notified when back in stock
Estimated Delivery
Arrives
Disclaimer
Secure checkout
UZG-01 LAN/POE WIFI USB ZigBee 3.x Coordinator
Say Hello, to remake of very popular ZigStar LAN Gateway,most important addition is that is having on board PoE at/af, NEW CC2652P7 chip with support up to 300 Zigbee devices, beautiful enclosure.
It's using CC2652P TI chip, the most powerful (+20dB) and can be used as ZigBee Coordinator/Router in various Smart Home installations including the Zigbee2MQTT, Home Assistant (ZHA), ioBroker ,etc. and comes pre-flashed with the latest Z-Stack 3.x with 3 LED for status indication.
Features
- POE or USB-C powering, can be powered by type-C power by PoE. PoE+type-C works at the same time as optoelectronic isolation included
- CC2652P7 TI chip, the most powerful (+20dB), up to 300 Zigbee devices
- 3 WORKING MODES: LAN/WiFi or USB Coordinator/Router
- 3 LED for indication on device status
- Communicates via USB,LAN or WiFi network with Z2M and ZHA.
- SMA port for an external antenna
- Easy programming with ZigStar Multi Tool. No external programmer needed!
- Cool design that can fit in any place
- Zigbee and ESP updates in couple clicks
- Each device individually tested before shipment
Order contains
- UZG-01 LAN POE USB WIFI Zigbee Coordinator
- +3dBI Antenna
- Pre-flashed wit last firmwares, both ESP32 and Zigbee
For full description and documentation go to https://xzg.xyzroe.cc/hardware/
Jargon buster
Plain-language definitions for the technical terms used above.
- ESP32
- ESP32 is a family of low-cost microcontroller chips and modules from Espressif with built-in WiFi and Bluetooth. They support programmable firmware and over-the-air updates, and are commonly programmed with toolchains such as the Arduino core and ESP-IDF.
- LED
- A light-emitting diode (LED) is a small electronic component that emits light when current flows through it in the correct direction. Because it only conducts one way, its polarity matters, and a through-hole LED must be soldered the correct way around to light up.
- PoE
- Power over Ethernet lets one Ethernet cable carry both network data and electrical power. This is useful when installing a device where running a separate power adaptor would be difficult.
- SMA
- SMA is a small threaded coaxial (RF) connector widely used to attach antennas and other radio-frequency cables. A device with SMA antenna ports needs antennas or pigtails with matching SMA connectors, or a suitable adapter, to connect to them.
- Type-C
- USB Type-C (USB-C) is a small, reversible USB connector used for charging, power, and data transfer on many modern devices. A Type-C port or plug indicates the cable and charger connection needed to power, charge, or communicate with a device.
- USB-C
- USB-C is a small, reversible USB connector that can carry power, data and, on some devices, video over a single cable. The same connector can range from charging only to high-speed data, so the functions a given port actually supports vary.
- Zigbee
- A low-power wireless standard commonly used by smart home sensors, switches, and lights. It matters if you want the board to communicate with Zigbee devices or act as part of a home automation network.
Find this product in
Brands
Connectivity
