DFRobot
DFRobot N20 Metal Motor Kit for Maqueen Plus V3
· MPN: DFR1225
Repair a damaged Maqueen Plus V3 motor without replacing the whole robot. This official DFRobot N20 motor accessory kit is made for quick classroom or projec...
Repair a damaged Maqueen Plus V3 motor without replacing the whole robot. This official DFRobot N20 motor accessory kit is made for quick classroom or project repairs when dust, hair, particles or rough handling have jammed gears or damaged a motor.
It is compatible with Maqueen Plus V3 models MBT0050-AA and MBT0050-18650. The kit contains one N20 metal motor, a motor mounting bracket, two mounting screws and a motor connecting wire, so it covers one motor replacement.
The motor connects using a PH2.0 connector for plug-and-play installation, with no soldering required. A Hall magnetic ring and PCB are pre-installed, and a motor replacement wiki guide is provided by DFRobot.
Please note: new Maqueen Plus V3 robots already include the two motors required for operation. If both motors on your robot are damaged, you will need two kits.
Features:
- All-in-One Solution: Includes one motor, a mounting bracket, screws, and a connecting wire—everything needed for a single motor replacement.
- Quick & Easy Repair: The motor connects via a PH2.0 connector for plug-and-play installation.
- Quick & Easy Repair: No soldering is required.
- Quick & Easy Repair: Simply swap the old motor out and plug the new one in.
- Official Accessory: Guarantees perfect compatibility and performance, matching the original motor specifications of the Maqueen Plus V3.
- Integrated Encoder: The motor comes with a pre-installed Hall magnetic ring and PCB, enabling precise closed-loop control over speed and position.
Specifications:
- Interface: 2P PH2.0
- Screw: M2×8 Cross-Recessed Combination Screw
- Model: N20 (with rear output shaft)
- Rated Voltage: 6V DC
- Motor Speed: 20000 RPM (at Rated Voltage)
- Gear Reduction Ratio: 1:75 (Mechanical Reduction)
- Output Shaft Speed: 266 RPM (at Rated Voltage)
- Rotation Direction: CCW (Counterclockwise, Viewed from Output Shaft End)
- Motor Mount: ABS (Acrylonitrile Butadiene Styrene)
- Connecting Wire: 2P PH2.0 Dual-Ended Cable
Jargon buster
Plain-language definitions for the technical terms used above.
- closed-loop control
- Closed-loop control means the system uses feedback, such as motor position or speed, to adjust its output automatically. This matters because it can keep a motor moving accurately even when the load changes, unlike simple open-loop control.
- encoder
- A device attached to a motor or shaft that reports movement, such as rotation steps or position. In a pump system, an encoder can help measure or control how much the motor has turned, which affects how repeatable the watering amount can be.
- PCB
- A printed circuit board is a rigid board with copper tracks that connect electronic parts without loose wires. For this kit, the PCBs also form the airplane shape, so they are both the circuit base and part of the finished model.
Find this product in
Robotics & Motion
