DFRobot
Raspberry Pi e-ink Display Module
This Raspberry Pi e-ink display module comes with a 2.13” screen with a resolution of 250×122, adopting SPI interface to communicate with Raspberry Pi. It...
Get notified when back in stock
This Raspberry Pi e-ink display module comes with a 2.13” screen with a resolution of 250×122, adopting SPI interface to communicate with Raspberry Pi. It leads out the pins on Raspberry Pi, so there would be no conflicts if you need to use the e-ink display and Raspberry Pi’s pins at the same time. The display supports custom font. There are two patch touch switches on the module for expanding more applications. This e-ink display features small size, compact layout, plug and play, and low power consumption. It can provide clear display even in sunlight. When powered off, the e-ink display will continue to display the last screen. Since it will take a long time for the display to refresh fully, we don’t recommend using the product in the application that needs frequent refreshing to display data.
SPECIFICATION
- Operating Voltage: 3.3V
- Model: GDE0213B1
- Resolution: 250 x 122
- Interface Type: SPI
- Color: black, white
- Refresh way: fully or partially refresh
- Refresh time: 3s for full refresh, 680ms for partial refresh
- Refresh Power: 26.4mW
- Connector: 2.54mm 2*20pin
- Dimension: 66.5 x 31 mm/2.62x1.22”
DOCUMENTS
Jargon buster
Plain-language definitions for the technical terms used above.
- SPI
- A fast serial communication bus often used for displays, memory cards, and sensors. It matters because SPI devices need specific pins for clock and data, plus a separate chip-select line for each device.
Find this product in
Brands
Displays & Screens
Related Tutorials
Free step-by-step guides
