DFRobot
Monochrome 0.96 128x64 I2C/SPI OLED Display
This 0.96” OLED display module uses the SSD1306 drive chip, has 128x64 self-illuminating white pixels, and adopts two communication methods: SPI/ I2C, I2C in...
This 0.96” OLED display module uses the SSD1306 drive chip, has 128x64 self-illuminating white pixels, and adopts two communication methods: SPI/ I2C, I2C in default. With its high contrast, simple wiring and low power consumption, it can be applied to many display applications, such as wearable display devices, Mini small game consoles, desktop widgets, etc.
This 0.96” OLED display module supports both 3.3V and 5V. The display module adopts a high-contrast, low-power OLED display. It is compatible with controllers such as Arduino UNO, Leonardo, ESP32/ESP8266, FireBettle-M0 and so on. Internal power-on reset processing, I2C communication methods, so that your welding line will be more convenient and simpler. If you want to change I2C communication to SPI, you just need to change the resistor position. In addition, the display is in an aluminum frame package that protects the screen from damage, and also prevents you from scratching that caused by the glass edge of the screen.
Note: Turn the pixels off when you are not using the display to prevent the use of some pixels too long to darken them, which will cause the brightness uniformity problem.
FEATURES
- Self-illuminating OLED display
- Controllable pixels and low power consumption
- I2C/SPI communication, I2C in default
- Supports power-on reset
APPLICATIONS
- Thermometer
- Desktop weather display
- Kitchen weighing machine
- Air quality detector
- Mini Game consoles
- Wearable display
SPECIFICATION
- Operating voltage: 3.3V to 5V
- Color: white pixels
- Number of pixels: 128 columns x 64 rows
- Interface: I2C (in default) / SPI
- I2C address: 0x3C
- Drive chip: SSD1306
- Brightness: 180 (Typ) cd/m2
- Full-screen lighting power: approx. 24mA*3.3V/5V(I2C);
approx. 27mA*3.3V/5V(SPI)
- Full-screen off power consumption: approx. 2mA*3.3V/5V(I2C);
approx. 2.87mA*3.3V/5V(SPI)
- Operating temperature: -30°C to 70°C
- Display area: 21.744 x 10.864(mm) / 0.86”x 0.42”
- Size: 30.00x30.00 mm / 1.18”x 1.18”
- Weight: 4.2 g
DOCUMENTS
Jargon buster
Plain-language definitions for the technical terms used above.
- ESP32
- ESP32 is a family of microcontroller modules with built-in wireless features such as Bluetooth and WiFi. Knowing this product uses an ESP32-based module helps explain how it provides wireless serial communication and firmware update features.
- I2C
- I2C is a two-wire communication bus used by many sensors and small modules. It matters because several I2C devices can share the same two wires, but each device needs a compatible address and your controller must support I2C.
- I2C address
- An I2C address is the number a device uses so a microcontroller can tell it apart from other devices on the same I2C bus. It matters because two devices with the same fixed address may conflict if used together.
- OLED
- OLED stands for organic light-emitting diode, a display type where each pixel produces its own light. It matters because OLED screens are thin, high-contrast and easy to read for small status displays, but they can be more sensitive to image burn-in than some other display types.
- SPI
- A fast serial communication bus often used for displays, memory cards, and sensors. It matters because SPI devices need specific pins for clock and data, plus a separate chip-select line for each device.
Find this product in
Brands
Displays & Screens
Supplier page — dfrobot.com
Supplier Description · 745.0 KB · Click any page to view full size
Related Tutorials
Free guides on learn.littlebird.com.au
