Adafruit
Adafruit DRV8833 DC/Stepper Motor Driver Breakout Board
The Adafruit DRV8833 is a dual H-bridge motor driver breakout, capable of driving two DC motors bidirectionally or one bipolar/unipolar stepper motor at up t...
The Adafruit DRV8833 is a dual H-bridge motor driver breakout, capable of driving two DC motors bidirectionally or one bipolar/unipolar stepper motor at up to 1.2 A per channel. It's well suited for low-voltage applications, operating from 2.7V to 10.8V motor power.
The DRV8833 features built-in kickback diodes, eliminating the need for external flyback protection. Adjustable current limiting is included — set to 1 A by default, but configurable or disableable. Two digital inputs per H-bridge allow PWM speed control. Motor voltage and logic voltage share a single supply, but logic levels of 2.7V and above are accepted regardless of motor voltage.
Key Features
- Dual H-Bridge – Drive 2× DC motors or 1× stepper motor
- 1.2 A Per Channel – 2 A peak (short duration)
- 2.7V–10.8V Motor Power – Ideal for low-voltage applications
- Built-In Kickback Diodes – No external flyback protection needed
- Adjustable Current Limiting – Default 1 A, configurable or disableable
- PWM Speed Control – Two digital inputs per H-bridge
- Polarity Protection – FET on motor voltage input
Also Available
- DRV8871 DC Motor Driver – 3.6 A, 6.5–45V (higher voltage and current)
Ideal For
- Small robotics and motorised projects
- Low-voltage battery-powered motor control
- Stepper motor applications
- Educational and prototyping projects
Package Contents
- 1× DRV8833 motor driver breakout board (assembled and tested)
- 1× Header strip (soldering required)
Jargon buster
Plain-language definitions for the technical terms used above.
- breakout
- A breakout is a small circuit board that makes a tiny or hard-to-solder component easier to connect to with standard pins. It matters because this OLED module can be wired into a microcontroller project without needing to solder directly to the display’s fine contacts.
- Headers
- Rows of metal pins used to plug a module into a breadboard or connect it with jumper wires. Pre-soldered headers make the module easier to use straight away without needing to solder the pins yourself.
- motor driver
- An electronic circuit that lets a low-power controller switch and control a motor that needs more current than the controller pins can safely provide. Checking motor driver support matters because pumps and motors usually cannot be connected directly to a microcontroller output.
- PWM
- Pulse Width Modulation is a way for a digital pin to simulate variable output power by switching on and off very quickly. It matters for controlling things like LED brightness, motor speed, or servo-style signals from a microcontroller pin.
- Terminal block
- A connector used to join wires together in a neat, removable, or serviceable way. For this product, it helps split one power input into several outputs without soldering.
Find this product in
Brands
Related Tutorials
Free guides on learn.littlebird.com.au
