Sensors & Input

SKU: DF-DFR0198 | Brand: DFRobot

This is a waterproofed version of the DS18B20 Temperature sensor. Handy for when you need to measure something far away, or in wet conditions. While the sensor is good up to 125°C the cable is jacketed in PV...

SKU: LB-LR0007 | Brand: Little Bird

Flame Detection Sensor Module for use with Arduino Sensor for flame wavelengths between 760 nm to 1100 nm infrared is most sensitive60 degree detection sensor   Two outputs mode: AO: analog output, real-time ou...

SKU: LB-LS4690 | Brand: Little Bird

Digital temperature sensor DS18B20, waterproof case. Working range from -55 to 125 degrees. Resolution 0.5 in range from -10 up to 85 degrees.

SKU: SF-SEN-11050 | Brand: SparkFun

This sealed digital temperature probe lets you precisely measure temperatures in wet environments with a simple 1-Wire interface. The DS18B20 provides 9 to 12-bit (configurable) temperature readings over a 1-Wire i...

SKU: SF-BOB-12009 | Brand: SparkFun

The SparkFun Bi-Directional Logic Level Converter safely translates signals between different voltage levels — stepping 5V down to 3.3V and 3.3V up to 5V on the same channel. It also works with 2.8V and 1.8V devices, ...

SKU: DF-KIT0021 | Brand: DFRobot

A waterproof DS18B20 digital temperature sensor kit with everything you need to connect to an Arduino. The stainless steel probe measures temperatures from -55°C to +125°C over a 1-Wire interface, requiring just one d...

SKU: LB-LR0214-110A | Brand: Little Bird

Raspberry Pi 8 channel Level Switching (3.5V to 5V) IO Module Logic Level Converter is able to convert signals from 5V down to 3.3V (and vice versa) meaning you can safely use 5V or 3.3V devices with the Raspberry ...

SKU: LB-24-TEMP | Brand: Little Bird

A pre-wired DS18B20 digital temperature sensor on a breakout module with three labelled pins for easy connection. The DS18B20 uses the 1-Wire protocol, requiring only a single data line to communicate temperature read...

SKU: SF-SEN-18367 | Brand: SparkFun

A sealed, waterproof DS18B20 digital temperature probe for precise measurements in wet or harsh environments. The sensor communicates over a 1-Wire interface, requiring just one data pin (plus ground) to connect to yo...

SKU: AF-4007 | Brand: Adafruit

If you're like me, you've dreamed of being a dolphin - smoothly gliding through the water. Using your echo-location abilities to detect tasty fish treats. Until genetic modifications catches up with our desires, we'll...

SKU: AF-1375 | Brand: Adafruit

This breakout board is the simplest way to create a project with a single "toggle" capacitive touch sensor. No microcontroller is required here - just power with 1.8 to 5.5VDC and touch the pad to activate the sens...

SKU: LB-LS4690-50CM | Brand: Little Bird

A waterproof DS18B20 digital temperature probe with a 0.5m cable and XH2.54mm connector. Ideal for monitoring temperatures in wet or harsh environments including aquariums, hydroponics, brewing, and outdoor weather st...

SKU: SF-BOB-13906 | Brand: SparkFun

The SparkFun Multiplexer Breakout provides access to all pins and features of the 74HC4051, an 8-channel analog multiplexer/demultiplexer. The 74HC4051 allows you to turn four I/O pins into eight multifunctional, indi...

SKU: EC-SPS40201S | Brand: Elecrow

This Elecrow 4-channel IR reflective sensor module combines four infrared emitter/receiver pairs with a mainboard that processes all signals. When an object enters the detection range, the corresponding channel output...

SKU: SF-SEN-14520 | Brand: SparkFun

The SparkFun Capacitive Touch Breakout provides a single momentary touch button using the AT42QT1011 capacitive sense chip. Simply supply 1.8–5 V and ground — the chip handles all touch monitoring and outputs a digita...

SKU: AF-381 | Brand: Adafruit

This is a pre-wired and waterproofed version of the DS18B20 sensor. Handy for when you need to measure something far away, or in wet conditions. While the sensor is good up to 125°C the cable is jacketed in PVC ...

SKU: DF-TEL0119 | Brand: DFRobot

The USB/TTL Raspberry Pi GPS Tracker is a compact GPS location module built around the L80-39 chip. With 66 search channels and 22 simultaneous tracking channels, it delivers fast satellite acquisition and reliable po...

SKU: AF-1374 | Brand: Adafruit

This breakout board is the simplest way to create a project with a single "momentary" capacitive touch sensor. No microcontroller is required here - just power with 1.8 to 5.5VDC and touch the pad to activate the sens...

SKU: WS-30717 | Brand: Waveshare

Add 4G LTE connectivity and GNSS positioning to your Raspberry Pi with this SIM7600NA-H HAT. It supports LTE Cat-4 data rates (up to 150 Mbps down / 50 Mbps up), phone calls, SMS, and multi-constellation satellite nav...

SKU: EF-EF05004 | Brand: ElecFreaks

It is sensitive to changes in ambient temperature and humidity and can be used for high-temperature alarms and environmental humidity detection.PlanetX DHT11