Sensors & Input

SKU: SF-SEN-11005 | Brand: SparkFun

This non-invasive current sensor (also known as a split-core current transformer) clamps around the supply line of an electrical load to measure how much current is flowing through it. The sensor acts as an inductor, ...

SKU: AF-574 | Brand: Adafruit

Put a current meter anywhere with this very handy display. This panel meter requires a DC voltage to run, and then has two thick gauge wires to measure current draw. A shunt is already on board so its very easy to hoo...

SKU: SF-SEN-09405 | Brand: SparkFun

A simple-to-use MQ-6 gas sensor for detecting liquefied petroleum gas (LPG) — primarily propane and butane — in the air. The sensor detects concentrations from 200 to 10,000 ppm with high sensitivity and fast response...

SKU: SF-SEN-09404 | Brand: SparkFun

This is a simple-to-use compressed natural gas (CNG) sensor, suitable for sensing natural gas (composed of mostly Methane [CH4]) concentrations in the air. The MQ-4 can detect natural gas concentrations anywhere from ...

SKU: DF-SEN0223 | Brand: DFRobot

The Gravity Conductivity Sensor Switch module can be used to detect if an object has electrical conductivity. Its maximum detection value is 10MΩ. It can detect not only coins, wires, metal and other good conducto...

SKU: DF-SEN0098-V2 | Brand: DFRobot

##Introduction This is an updated version. Retired Product: Gravity: Analog 50A Current Sensor (AC/DC) V1Get this low-power current sensor to monitor your project every second for saving energy or protecting the circu...

SKU: EF-EF05033 | Brand: ElecFreaks

The ELECFREAKS PlanetX MQ5 Sensor is an essential sensor for environmental detection. The ELECFREAKS PlanetX MQ5 Sensor can be used to detect the leakage of flammable gas, you can use it to make a household gas leak a...

SKU: DF-SEN0563 | Brand: DFRobot

Fermion: MEMS Formaldehyde HCHO Gas Detection Sensor employs state-of-the-art micro-electromechanical system (MEMS) technology, endowing the sensor with compact dimensions (13x13x2.5mm), low power consumption (<20mA),...

SKU: DF-SEN0574 | Brand: DFRobot

Fermion: MEMS Nitrogen Dioxide NO2 Gas Detection Sensor employs state-of-the-art micro-electromechanical system (MEMS) technology, endowing the sensor with compact dimensions (13x13x2.5mm), low power consumption (<20m...

SKU: DF-SEN0554 | Brand: DFRobot

This non-contact turbidity sensor detects water quality by measuring the level of turbidity. Based on the optics principle, it is capable of detecting the light transmittance and scattering rate of the liquid in trans...

SKU: DF-SEN0474 | Brand: DFRobot

This is a sensor that detects hydrogen chloride concentration and supports three output modes: analog, I2C, and UART. The probe has been calibrated at the factory, which can quickly and accurately measure the concentr...

SKU: DF-SEN0476 | Brand: DFRobot

This is a sensor that detects phosphine concentration and supports three output modes: analog, I2C, and UART. The probe has been calibrated at the factory, which can quickly and accurately measure the concentration of...

SKU: DF-SEN0440 | Brand: DFRobot

A compact MEMS gas sensor breakout based on the MiCS-5524, capable of detecting concentrations of multiple gases including carbon monoxide (CO), methane (CH4), ethanol (C2H5OH), propane (C3H8), butane (C4H10), hydroge...

SKU: DF-SEN0441 | Brand: DFRobot

This is a hydrogen and nitrogen oxide gas concentration sensor launched by DFRobot. The sensor uses MEMS technology to support gas concentration detection of NO, NO2 and H2. The matching sample code integrates the co...

SKU: SF-SEN-17050 | Brand: SparkFun

The MQ-9B is a CO and CH₄ gas detection sensor form Winsen. The sensing material of the MQ-9B is SnO2, which has a low conductivity in clean air. It detects carbon monoxide (1.5V) by method of cycling high and low tem...

SKU: SF-SEN-17049 | Brand: SparkFun

The MQ-2 is a smoke and combustible gas sensor manufactured by Winsen. It detects flammable gases and smoke in a concentration range of 300–10,000 ppm, with particularly high sensitivity to propane and smoke. It's wid...

SKU: SF-SEN-17053 | Brand: SparkFun

The MQ-137 is an ammonia (NH3) gas sensor from Winsen, designed to detect ammonia concentrations in the air. The sensing element is tin dioxide (SnO2), which has lower conductivity in clean air and increases in conduc...

SKU: EF-EF04100 | Brand: ElecFreaks

Octopus MG811 CO2 Gas Sensor is a CO2 electronic brick in our OCTOPUS series, the basic design for the outlook, PCB fixing holes and connections are the same with them.The higher the CO2 concentration is, the lower th...

SKU: EF-EF04016 | Brand: ElecFreaks

Octopus Non-invasive AC current sensor (TA17-03) Brick is Electronic building blocks, a transformer, an ammeter, a current sensor module, compatible with all kinds of Arduino electronic building blocks / sensor shi...

SKU: EF-EF04029 | Brand: ElecFreaks

An analogue gas sensor module based on the MQ-2 sensor, part of the Octopus Electronic Bricks series for plug-and-play integration with Arduino and compatible boards. Detects a wide range of combustible gases and smok...