Store

DFRobot

$15.36 |
In stock at supplier
No reviews yet

This non-contact turbidity sensor detects water quality by measuring the level of turbidity. Based on the optics principle, it is capable of detecting the li...

Estimated Delivery
Arrives
Disclaimer
View Markdown
Secure checkout

This non-contact turbidity sensor detects water quality by measuring the level of turbidity. Based on the optics principle, it is capable of detecting the light transmittance and scattering rate of the liquid in transparent cylinder containers with a diameter of 40–50mm, which will then be output as an analog value within a certain range that reflects the level of liquid turbidity.

The turbidity sensor comes with two infrared probes, which should be oppositely installed on a container. And it detects when the liquid level inside is higher than the two probes. The sensor can measure without coming into contact with liquid, making it less susceptible to corrosion from water or chemicals.

Installation


Features
  • No mechanically moving parts, high reliability
  • Small size & low cost

  • Applications
  • Water quality monitoring system

  • Specification
  • Supply Voltage: 5V
  • Communication Mode: UART-TTL
  • Applicable Cylinder Container Diameter: 40 to 50mm
  • Baud Rate: 9600
  • Operating Current: less than 10mA
  • Response Time: less than 1s
  • Operating Temperature: 5 to 60°C
  • Storage Temperature: 0 to 65°C
  • Service Life: 50000h

  • Documents
  • Product wiki

  • Shipping List
  • Turbidity Sensor × 1
  • Gravity: 4Pin Sensor Adapter × 1
  • Jargon buster

    Plain-language definitions for the technical terms used above.

    baud
    Baud is the signalling rate of a serial connection, often used as the speed setting for UART communication. Matching the baud rate matters because both connected devices must use the same setting for readable data.
    Gravity
    Gravity is DFRobot’s plug-in connector system for sensors, motors and modules, using standard cables to reduce loose jumper wiring. It matters because Gravity-compatible parts can connect directly to these ports, while non-Gravity parts may need adapters or manual wiring.
    Transmittance
    Transmittance describes how much light passes through the display or touch panel layers. Higher transmittance can make the screen appear brighter or clearer for the same backlight power.
    UART
    UART is a simple serial connection that sends data over separate transmit and receive wires, often labelled TX and RX. It matters because this module is designed to replace a wired UART cable with a wireless link while keeping the same serial data format.

    Supplier page — dfrobot.com

    Supplier Description · 1.7 MB · Click any page to view full size

    Download PDF
    Stella
    Stella Expert

    Ask me anything about this product

    Maddy, co-founder of Little Bird

    Need help? We're here for you!

    Hi, I'm Maddy. My team and I are ready to help with your order or any questions.