Sensors & Input
Explore our extensive range of sensor modules and input devices, stocked locally for fast delivery across Australia. Whether you're building a weather station, robot, or smart home project, you'll find temperature, humidity, gas, motion, distance, pressure, and biometric sensors to suit any application.
Perfect for Arduino and Raspberry Pi makers, STEM students, and professional developers alike. From IMUs and GPS modules to NFC readers and data loggers, everything you need to add real-world sensing to your next project is right here.
Electret Microphone Amplifier - MAX9814 with Auto Gain Control
SKU: AF-1713 | Brand: Adafruit
Add an ear to your project with this well-designed electret microphone amplifier with AGC. This fully assembled and tested board comes with a 20-20KHz electret microphone soldered on. For the amplification, we use th...
Delivered by Wed 10 Jun
Electret Microphone Amplifier - MAX4466 with Adjustable Gain
SKU: AF-1063 | Brand: Adafruit
A well-designed electret microphone amplifier breakout built around the Maxim MAX4466 op-amp, specifically engineered for microphone amplification with excellent power supply noise rejection. The board comes fully ass...
Delivered by Wed 10 Jun
Octopus Analog Capacitive Soil Moisture Sensor
SKU: EF-EF04097 | Brand: ElecFreaks
The Octopus Capacitive Soil Moisture Sensor uses capacitive sensing to detect soil moisture levels, avoiding the corrosion problems common with resistive sensors for a much longer service life. It outputs an analogue ...
Delivered by Wed 10 Jun
Analog to Digital Converter - MCP3002
SKU: SF-COM-08636 | Brand: SparkFun
The MCP3002 is a 10-bit analog-to-digital converter (ADC) with a simple SPI interface, available in a breadboard-friendly 8-pin DIP package. Use it to add analog input capability to microcontrollers that lack an ADC, ...
Delivered by Wed 10 Jun
Adafruit NAU7802 24-Bit ADC - STEMMA QT / Qwiic
SKU: AF-4538 | Brand: Adafruit
The Adafruit NAU7802 is a high-resolution 24-bit differential ADC breakout designed specifically for reading strain gauges, load cells, and other Wheatstone bridge sensors. With built-in gain amplification and calibra...
Delivered by Tue 30 Jun
ADS1015 12-Bit ADC - 4 Channel with Programmable Gain Amplifier
SKU: AF-1083 | Brand: Adafruit
Add high-speed analog-to-digital conversion to any microcontroller with the ADS1015 breakout. This 12-bit ADC delivers 3,300 samples per second over I2C, with four single-ended or two differential input channels and a...
Delivered by Wed 10 Jun
Sensor Trimpot ELECFREAKS PlanetX
SKU: EF-EF05018 | Brand: ElecFreaks
An analogue trimpot (trimmer potentiometer) sensor module from the ELECFREAKS PlanetX series, designed for use with micro:bit via RJ11 connection. The potentiometer provides stepless rotation over a 0°–300° range, out...
Delivered by Wed 10 Jun
MyoWare 2.0 Arduino Shield
SKU: SF-DEV-18426 | Brand: SparkFun
The MyoWare® 2.0 Arduino Shield is designed to easily connect up to six MyoWare 2.0 Muscle Sensors and Link Shields using 3.5mm TRS-to-TRS audio cables. The board comes pre-populated with male headers so all you would...
Delivered by Fri 19 Jun
Adafruit INA3221 - Triple 0-26 VDC, ±3.2 Amp Power Monitor
SKU: AF-6062 | Brand: Adafruit
The Adafruit INA3221 breakout monitors current, voltage, and power on up to three independent power rails simultaneously over I2C. Each channel supports high or low-side measurement up to +26V DC at ±3.2A with ±1% pre...
Delivered by Tue 30 Jun
Adafruit HX711 24-bit ADC for Load Cells / Strain Gauges
SKU: AF-5974 | Brand: Adafruit
The Adafruit HX711 Breakout is a high-resolution 24-bit differential ADC designed for reading load cells, strain gauges, and other Wheatstone bridge sensors. With selectable 64× or 128× gain on Channel A and fixed 32×...
Delivered by Tue 30 Jun
SparkFun Current Sensor Breakout - INA169
SKU: SF-SEN-12040 | Brand: SparkFun
The INA169 is a “high-side current monitor,” which means that you place a resistor (a “shunt resistor”) on the positive power rail and the INA169 measures the voltage drop across that resistor. The INA169 outputs a sm...
Delivered by Fri 19 Jun
ADS1115 16-Bit ADC - 4 Channel with Programmable Gain Amplifier
SKU: AF-1085 | Brand: Adafruit
Add precision analog-to-digital conversion to any microcontroller with the ADS1115 breakout. This 16-bit ADC delivers 860 samples per second over I2C, with four single-ended or two differential input channels and a bu...
Out of stock
SparkFun Qwiic Scale - NAU7802
SKU: SF-SEN-15242 | Brand: SparkFun
The SparkFun Qwiic Scale is a small breakout board for the NAU7802 that allows you to easily read load cells to accurately measure the weight of an object. By connecting the board to your microcontroller you will be a...
Out of stock
Compare your options
All buying guides
The Teacher's Guide to micro:bit Robots: Kits, Buggies, and Robotics Compared
Compare micro:bit-compatible robot kits, buggies, and robotics platforms by age range, assembly difficulty, sensors, and curriculum fit — for classrooms, clubs, and home learners across Australia.
49 products compared
Title The Maker's Guide to ADCs: Resolution, Speed, and Interface Compared
Compare analogue-to-digital converters by bit depth, sample rate, and bus (I²C vs SPI) to pick the right chip for your Arduino, Raspberry Pi, or microcontroller project.
16 products compared
