Sensors & Input

SKU: LB-24-MQ2 | Brand: Little Bird

This is the MQ-2 smoke sensor module. It is sensitive to flammable gases such as LPG, propane, and methane. Find our tutorial here It has four pins:AO: Analog OutputDO: Digital OutputGND: In electronics, we defi...

SKU: DF-SEN0565 | Brand: DFRobot

Fermion: MEMS Methane CH4 Gas Detection Sensor employs state-of-the-art micro-electromechanical system (MEMS) technology, endowing the sensor with compact dimensions (13x13x2.5mm), low power consumption (<20mA), minim...

SKU: DF-SEN0129 | Brand: DFRobot

INTRODUCTION This is an Arduino CH4 gas sensor. It uses MQ4 probe which is able to detect nature gas, CH4. It is less sensitivity in detecting alcohol, cooking fumes, and cigarette smok...

SKU: DF-SEN0127 | Brand: DFRobot

&nbsp;&nbsp;INTRODUCTION This is a generic Arduino gas sensor. It has MQ2 probe which is able to detect LPG, i-butane, propane, methane ,alcohol, Hydrogen, smoke.It can be used in gas leakage detecting device in c...

SKU: DF-SEN0564 | Brand: DFRobot

The Fermion MEMS Carbon Monoxide Sensor uses micro-electromechanical system (MEMS) technology to detect CO gas concentrations from 5 to 5,000 ppm. Its compact size, low power consumption, short preheat time, and fast ...

SKU: DF-SEN0133 | Brand: DFRobot

This is an Arduino hydrogen gas sensor. It has high sensitivity to Hydrogen (H2) and less sensitivity to alcohol, LPG,cooking fumes . Hydrogen gas is highly flammable and will burn in air at a very wide range...

SKU: DF-SEN0569 | Brand: DFRobot

The Fermion MEMS Ethanol (EtOH) Gas Detection Sensor uses micro-electromechanical system (MEMS) technology for compact, low-power ethanol gas detection. With a detection range of 1–500 ppm, it provides qualitative mea...

SKU: DF-SEN0568 | Brand: DFRobot

Fermion: MEMS Hydrogen Sulfide H2S Gas Detection Sensor employs state-of-the-art micro-electromechanical system (MEMS) technology, endowing the sensor with compact dimensions (13x13x2.5mm), low power consumption (<20m...

SKU: DF-SEN0467 | Brand: DFRobot

This is a sensor that detects hydrogen sulfide concentration and supports three output modes: analog, I2C, and UART. The probe has been calibrated at the factory, which can quickly and accurately measure the concentra...

SKU: DF-SEN0570 | Brand: DFRobot

Fermion: MEMS Smoke Gas Detection Sensor employs state-of-the-art microelectromechanical system (MEMS) technology, endowing the sensor with compact dimensions (13x13x2.5mm), low power consumption (<20mA), minimal heat...

SKU: DF-SEN0571 | Brand: DFRobot

Fermion: MEMS Odor Smell Gas Detection Sensor employs state-of-the-art microelectromechanical system (MEMS) technology, endowing the sensor with compact dimensions (13x13x2.5mm), low power consumption (<20mA), minimal...

SKU: DF-SEN0567 | Brand: DFRobot

Fermion: MEMS Ammonia NH3 Gas Detection Sensor employs state-of-the-art micro-electromechanical system (MEMS) technology, endowing the sensor with compact dimensions (13x13x2.5mm), low power consumption (<20mA), minim...

SKU: DF-SEN0465 | Brand: DFRobot

This is a sensor that detects oxygen concentration and supports three output modes: analog, I2C, and UART. The probe has been calibrated at the factory, which can quickly and accurately measure the concentration of ox...

SKU: DF-SEN0470 | Brand: DFRobot

A factory-calibrated electrochemical sulfur dioxide (SO2) sensor with I2C, UART, and analogue output modes. Part of the DFRobot Gravity gas sensor series, this module quickly and accurately measures SO2 concentration ...

SKU: DF-SEN0130 | Brand: DFRobot

The Gravity MQ5 gas sensor is highly sensitive to LPG, natural gas, and town gas, with lower sensitivity to alcohol, cooking fumes, and cigarette smoke. The analogue output is proportional to gas concentration, and se...

SKU: DF-SEN0466 | Brand: DFRobot

This is a sensor that detects carbon monoxide and supports three output modes: analog, I2C, and UART. The probe has been calibrated at the factory, which can quickly and accurately measure the concentration of carbon ...

SKU: DF-SEN0376 | Brand: DFRobot

This is an&nbsp;Arduino&nbsp;compatible alcohol sensor module from DFRobot with a 0-5ppm measuring range, supporting I2C and UART outputs. Aiming at fast and accurate detection of alcohol gas concentration in the air,...

SKU: EF-EF04060 | Brand: ElecFreaks

The Octopus MQ3 Alcohol Sensor Brick from ElecFreaks is an analogue gas sensor module with high sensitivity to alcohol vapour. It outputs an analogue voltage proportional to the detected alcohol concentration, making ...

SKU: DF-FIT0227 | Brand: DFRobot

The MQ7 is a simple-to-use Carbon Monoxide (CO) sensor suitable for detecting CO concentrations in the air. It offers a wide detection range from 20 to 2000 ppm, making it ideal for safety monitoring and air quality p...

SKU: SF-BOB-08891 | Brand: SparkFun

This breakout board provides a convenient PCB adapter for MQ-series gas sensors (MQ-3, MQ-4, MQ-6, MQ-7, and MQ-8). It converts the sensor's oversized, oddly-spaced pins into a standard breakout format that's easy to ...