Raspberry Pi Sensors

SKU: AF-6455 | Brand: Adafruit

Build a digital nose for indoor air quality projects with this SGP41 gas sensor breakout. The Sensirion SGP41 is a fully integrated MOX gas sensor with I2C interfacing, so you do not need to manage heater control or a...

SKU: SF-GPS-29491 | Brand: SparkFun

Add dual-band GNSS positioning to a Raspberry Pi or similar single-board computer with this SparkPNT GNSS Flex pHAT and DAN-F10N module combination. It pairs a GNSS Flex pHAT carrier with a u-blox DAN-F10N GNSS Flex M...

SKU: SF-GPS-29888 | Brand: SparkFun

Build high-accuracy positioning projects around a Raspberry Pi with this GNSS Flex pHAT and included ZED-X20P and IM19 module. It combines a u-blox ZED-X20P all-band RTK GNSS receiver with a Feyman IM19 IMU for centim...

SKU: SF-GPS-29890 | Brand: SparkFun

Add precise position and orientation data to a Raspberry Pi with this GNSS Flex pHAT and LG580P module combination. It is built for advanced navigation projects that need centimetre-level RTK positioning plus real-tim...

SKU: SF-GPS-30546 | Brand: SparkFun

Add survey-grade GNSS and inertial navigation to a Raspberry Pi in a compact pHAT format. This kit combines the GNSS Flex pHAT with the SparkPNT mosaic-G5 P3 and IM19 IMU module, pairing Septentrio's compact GNSS rece...

SKU: DF-SEN0654 | Brand: DFRobot

This lab-grade methane sensor is designed for quantitative CH₄ measurement in research settings, using TDLAS technology to report methane concentration in %LEL rather than the broad estimates typical of MQ-style gas s...

SKU: DF-SEN0664 | Brand: DFRobot

Built around the Bosch BMP585 chip, this Gravity module measures barometric pressure and temperature for altitude, weather and environmental sensing projects. Its gel-filled cavity and industrial protective cover help...

SKU: DF-SEN0475 | Brand: DFRobot

Measure hydrogen fluoride concentration with a factory-calibrated electrochemical probe that supports analogue, I2C and UART output modes. It is designed for quickly building an HF concentration detector for industria...

SKU: DF-SEN0469 | Brand: DFRobot

This calibrated gas sensor measures ammonia concentration in the environment using an electrochemical probe. It supports three output modes — analogue, I2C and UART — so it can slot into a wide range of microcontrolle...

SKU: DF-SEN0705 | Brand: DFRobot

This flexible tactile pressure sensor gives your project a compact 4 x 8 pressure matrix for mapping contact across a small surface. It integrates 32 independent sensing points in a 20 x 10mm active area, making it us...

SKU: DF-SEN0704 | Brand: DFRobot

This flexible thin-film array gives robots, wearables and HCI projects a compact way to sense where pressure is being applied. It integrates 36 independent sensing points into a 15 x 15mm active area, enabling real-ti...

SKU: DF-SEN0671 | Brand: DFRobot

Instead of measuring just one dot, the TF-NOVA projects a wide 14° by 1° curtain of laser light to create a continuous line of detection. At 1 metre, that line covers 25cm x 1.7cm, helping automated machines spot thin...

SKU: DF-SEN0646 | Brand: DFRobot

This ultra-compact dToF laser ranging sensor uses 940nm laser pulses to measure distance up to 7.8 metres with typical ±4cm accuracy. It is designed for precise, real-time ranging in compact robotics, drone, IoT and a...

SKU: AF-6049 | Brand: Adafruit

Add digital audio input to a capable microcontroller or single-board computer with this tiny breakout for the TDK ICS43434 I2S MEMS microphone. MEMS microphones detect sound like classic electret mics, but are much sm...

SKU: AF-6064 | Brand: Adafruit

Need approximate distance sensing over tens of centimetres to around a metre, plus ambient light measurement from the same board? This breakout carries Vishay’s VCNL4200, a two-in-one IR proximity and ambient light se...

SKU: AF-6490 | Brand: Adafruit

This breakout carries the TMAG5273 A2, a low-power linear 3D Hall-effect sensor for measuring magnetic fields across the X, Y and Z axes. Its built-in 12-bit ADC provides axis readings over I2C, and there is also an i...

SKU: PR-PIM181 | Brand: Little Bird

Enviro pHAT packs 4 different sensors, letting you measure temperature, pressure, light level, colour, 3-axis motion, compass heading, and analog inputs. That's up to 10 different variables!It's ideal for monitoring c...

SKU: SF-GPS-28929 | Brand: SparkFun

Achieve robust, centimetre-level RTK positioning in challenging RF environments with the SparkFun LG290P GNSS Flex pHAT. This all-in-one development board combines a versatile pHAT carrier with the powerful Quectel LG...

SKU: KI-5038 | Brand: Kitronik

The Kitronik Air Quality Control HAT for Raspberry Pi lets you monitor, log, and react to environmental data using the BME688 sensor. It measures temperature, pressure, humidity, air quality index, and eCO2, with an o...

SKU: PI-RPI-005 | Brand: Pimoroni

Make your Raspberry Pi into an Astro Pi with the Sense HAT - Pressure, humidity, temperature and orientation sensors combined with a beautiful 8x8 LED matrix!Attach the HAT to your Pi's GPIO pins and you can...