Motors (DC, stepper, servo)

SKU: LB-LR0259 | Brand: Little Bird

This compact 9 g micro servo is an affordable, simple actuator for small mechatronics projects, robot linkages and model mechanisms. It can operate from 3.0 V to 7.2 V, with the supplied feature ratings listed at 6.0 ...

SKU: LB-LR0228 | Brand: Little Bird

These are the popular 28YBJ-48 geared stepper motors with driver board. The motor and driver are suitable for 5V operation. 4 Phase Current : 160 mA per winding (320 mA in 4-step mode) Measured: 250mA stopped, 200...

SKU: EF-EF09081 | Brand: ElecFreaks

EF90D is a kind of 360 deg analog servo. It is light and portable, a little bigger than 5 cent coin. It works at 3V voltage and uses pulse width to adjust speed of the servo rotation, which also can be used to make...

SKU: WS-22311 | Brand: Waveshare

HRB8825 Stepper Motor HAT For Raspberry Pi, Drives Two Stepper Motors, Up To 1/32 Microstepping Stepper Motor HAT (B) Alternative Solution Of Stepper Motor HAT, Drives Two Stepper Motors, Up To 1/32 Microstep...

SKU: LB-LR0244 | Brand: Little Bird

This general-purpose 130-size hobby motor runs on 3–6V and spins at 4,000–8,000 RPM depending on the input voltage. Its compact size and 2 mm shaft make it well suited for small robotics projects, fan-powered cars, an...

SKU: DF-FIT0563 | Brand: DFRobot

This immersible pump can be used to water your plants, make a fountain or waterfall, even change your fish tank water. It comes with an inlet valve, you can adjust the water inflow manually. It works quietly with the...

SKU: LB-LS6502 | Brand: Little Bird

The MG996 Servo is a robust, high-torque servo designed for demanding applications. An upgrade to the popular MG995, this servo offers improved precision and performance with a redesigned PCB and IC control system. Fe...

SKU: DF-SER0043 | Brand: DFRobot

INTRODUCTION The TowerPro SG90C is a 360 degree micro servo. It uses a plastic gear drive and is light and compact. It can be used for various applications and DIY products, such as toy cars, boats, windmills etc...

SKU: EF-EF03406 | Brand: ElecFreaks

Motor:bit is a motor driving board based on micro:bit. It has integrated a TB6612 motor driving chip, which is used to drive two motors with maximun 1.2A DC single channel current. It has also integrated 12 GVS por...

SKU: AF-711 | Brand: Adafruit

A standard 130-size DC hobby motor with a wider operating range than typical toy motors: 4.5–9V DC instead of the usual 1.5–4.5V. This makes it ideal for Arduino and motor shield projects where 5V or 9V is readily ava...

SKU: EF-EF09082 | Brand: ElecFreaks

EF92A is a kind of 180 deg analog servo. It is light and portable, a little bigger than 5 cent coin. It works at 3V voltage and can be used to make small robot modules, mechanical arm modules and intelligent car modul...

SKU: DF-SER0006 | Brand: DFRobot

A lightweight 9g micro servo with 1.6 kgf·cm of torque at 4.8V. Ideal for small-scale robotics, beam robots, and automation tasks where a compact, affordable servo is needed. At only 9 grams, it fits into tight spaces...

SKU: LB-LS1017-60 | Brand: Little Bird

The GA25-370 is a compact 12V DC gear motor with metal gears and a built-in speed encoder for closed-loop control. This 60 RPM variant uses a higher gear ratio for increased torque at lower speed, making it well-suite...

SKU: SF-ROB-11696 | Brand: SparkFun

This is our new Hobby Motor now with a 6mm, 10 tooth, gear to make your basic projects a little simpler to manage. It works well for basic things like making a fan or spinning something pretty fast without much res...

SKU: LB-LS3639 | Brand: Little Bird

A 122-piece assortment of wheels, motors, and gears for quick prototyping and hands-on tinkering. This kit gives you the mechanical building blocks to create simple motorised chassis, spinning art projects, and other ...

SKU: DF-DRI0044 | Brand: DFRobot

The DFRobot 2×1.2A DC Motor Driver is a compact dual-channel motor driver based on the TB6612FNG IC. It requires only four GPIO pins to control two DC motors, using the same control logic as the DFRobot L298N motor dr...

SKU: LB-LS0461 | Brand: Little Bird

A micro coreless DC motor commonly used in DIY helicopters, drones, and small vibration projects. The compact 6 × 12 mm form factor and lightweight design make it ideal for weight-sensitive applications. Specificatio...

SKU: LB-LS2977 | Brand: Little Bird

Specification:Model: Mini 130 Vibration MotorMotor size: 25*20mmMotor height: 15.3mmVoltage range: DC 3V-6VRated voltage: DC 3.7VRated current: 0.8AWeight: 26gApplication: It is a Strong Vibration Motor. Packa...

SKU: LB-LS1017-280 | Brand: Little Bird

The GA25-370 is a compact 12V DC gear motor with metal gears and a built-in speed encoder for closed-loop control. Running at 280 RPM, it provides a good balance of speed and torque for small robotics and automation p...

SKU: EF-EF09086 | Brand: ElecFreaks