DFRobot
9g micro servo (1.6kg)
A lightweight 9g micro servo with 1.6 kgf·cm of torque at 4.8V. Ideal for small-scale robotics, beam robots, and automation tasks where a compact, affordable...
Get notified when back in stock
A lightweight 9g micro servo with 1.6 kgf·cm of torque at 4.8V. Ideal for small-scale robotics, beam robots, and automation tasks where a compact, affordable servo is needed. At only 9 grams, it fits into tight spaces while providing reliable performance.
Specifications
- Operating Voltage – 4.8–6V
- Operating Angle – 180°
- Stall Torque – 1.6 kgf·cm (4.8V)
- Speed (No Load) – 0.12 sec/60° (4.8V)
- Working Current – less than 500mA
- Dead Band – 7μs
- Operating Temperature – -30°C to +60°C
- Cable Length – 180mm
- Dimensions – 22 × 12.5 × 29.5mm
- Weight – 9g
Ideal For
- Small-scale robotics (e.g. Insectbot Kit)
- Beam robots and automation tasks
- Lightweight projects where space is limited
Package Contents
- 1× 9g Micro Servo (1.6kg)
Find this product in
Brands
Robotics & Motion
Supplier page — dfrobot.com
Supplier Description · 653.7 KB · Click any page to view full size
You might also like
Customers who bought this also bought
40 pin 30CM Jumper wire M/M
$3.90
Ultrasonic Distance Sensor HC-SR04
$4.05
Jumper Jerky Junior - Female to Female
$2.20
Jumper Jerky Junior - Male to Female
$2.20
Jumper Jerky Junior - Male to Male
$2.20
Arduino Compatible Breadboard with 400 Tie Points
$9.25
FPV Nylon Pan Tilt Kit (Without Servo)
$6.05
0.96" 7pin 128X64 OLED Display Module White
$4.95
Featured in buying guides
Comparison guides this product appears in
Jargon buster
Plain-language definitions for the technical terms in the product description.
- servo
- A servo is a motor with built-in position control, usually told to move to a specific angle by a control signal. It matters when you need repeatable movement, such as steering, arms, flaps, or linkages, rather than continuous spinning.
- Stall torque
- The maximum twisting force a servo can produce when its output is held still and cannot move. It helps you judge whether the servo is strong enough for a robot joint, steering linkage, or other load.
- Torque
- A twisting force that causes something to rotate, usually measured in newton-metres or kilogram-centimetres. It matters when choosing motors, servos, gears, and tools because higher torque is needed to lift heavier loads, turn larger wheels, or move mechanisms without stalling.