LEDs

SKU: PR-PIM242 | Brand: Little Bird

Rainbow HAT has a buffet of sensors, inputs and displays to explore Android ThingsTM. Use it as a weather station, a clock, a timer or stopwatch, a mood light, or endless other things. We've worked with the Android...

SKU: PR-PIM253 | Brand: Little Bird

Rainbow HAT is a feature-packed add-on board for the Raspberry Pi, loaded with sensors, inputs, displays, and LEDs. Use it as a weather station, clock, timer, mood light, or as a hands-on introduction to multiple Pi c...

SKU: DF-DFR0474 | Brand: DFRobot

Gravity Colorful LED is an LED twinkles with seven colors--the colors of rainbow. It is easy to light up the LED. Turn on the power, then the LED will light up without programming. The built-in controller contr...

SKU: AF-1004 | Brand: Adafruit

These ingenious little clips make it easier than ever to use our analog RGB LED strips - no need to solder! The clips snap onto the ends of the LED strip and hold securely. They're not waterproof but you could cover t...

SKU: AF-1046 | Brand: Adafruit

Make a scrolling sign, or a small video display with this 8x8 gridded yellow-orange LED matrix. Only 1.2" on a side, it is quite visible but not so large it won't plug into a breadboard! There are 16 pins on the si...

SKU: AF-4119 | Brand: Adafruit

The Adafruit CharliePlex LED Matrix Bonnet features a 16×8 grid of yellow LEDs driven by the IS31FL3731 charlieplex driver over I2C. Simply plug it onto any Raspberry Pi with a 2×20 header for a bright, programmable 1...

SKU: AF-1079 | Brand: Adafruit

This miniature 8×8 LED matrix packs 64 bright white LEDs into a compact 0.8″ (20 mm) square package. The 16 pins (8 per side) are on standard 0.1″ spacing, so the module plugs directly into a breadboard with room to s...

SKU: AF-4042 | Brand: Adafruit

This LED Is super chonky! Bigger than your average LED, it has a big, bold, and beautiful diffused body that measures approximately 18mm diameter. Inside is nestled a bi-color red and green LED, just like you're famil...

SKU: LB-LR0335-Y | Brand: Little Bird

This 5-metre length of EL wire (electroluminescent wire) glows a vibrant yellow when powered by the included battery-operated inverter. EL wire is a flexible, phosphor-coated wire that produces a cool, even glow simil...

SKU: AF-1312 | Brand: Adafruit

This is the easiest way possible to add small, bright RGB pixels to your project. We took the same technology from our Flora NeoPixels and made them breadboard friendly, with two rows of 3 x 0.1" spaced header on e...

SKU: AF-3954 | Brand: Adafruit

Upgrade your button-pad projects with full-colour NeoPixel backlighting. The NeoTrellis RGB Driver PCB is a 4×4 keypad controller with 16 NeoPixels and an onboard seesaw I2C chip that handles both button scanning and ...

SKU: AF-1427 | Brand: Adafruit

The Adafruit 16×8 LED Matrix Driver Backpack is a breadboard-friendly breakout for the HT16K33 multiplexed LED driver. Unlike the pre-configured LED backpacks, this version breaks out all 16 anode and 8 cathode pins, ...

SKU: AF-1455 | Brand: Adafruit

The Adafruit 12-Channel 16-bit PWM LED Driver uses the TLC59711 chip to provide 12 channels of constant-current, 16-bit PWM output — the highest resolution PWM driver available. Designed specifically for precision LED...

SKU: AF-560 | Brand: Adafruit

These chrome-plated metal buttons are rugged and look real good while doing it! Simply drill a 16mm hole into any material up to 1/2" thick and you can fit these in place, there's even a rubber gasket to keep&nbs...

SKU: AF-481 | Brand: Adafruit

This chrome-plated metal pushbutton is built tough and looks great doing it. Simply drill a 16mm hole into any panel up to 12.7 mm thick, drop it in, and tighten the included nut — a rubber gasket keeps water out of y...

SKU: AF-1479 | Brand: Adafruit

A 16mm illuminated pushbutton with a built-in white LED and momentary action. The switch contacts connect only while the button is held down and return to their normally-open state when released — perfect for trigger ...

SKU: AF-1622 | Brand: Adafruit

A diffused white LED backlight strip in a 3.5 mm thick acrylic enclosure. Normally found behind LCDs, this module uses a single white LED with a specially designed acrylic diffuser to provide near-uniform illumination...

SKU: AF-1626 | Brand: Adafruit

These pretty strips of light are plastic diffused backlights, often seen in LCD displays. Normally they're tucked behind the LCD and shine white light from below. Here, we've got the LEDs available individually and th...

SKU: AF-2038 | Brand: Adafruit

A 16×8 LED matrix backpack kit featuring two ultra-bright 1.2" white 8×8 round LED matrices on a single I2C-controlled driver board. The HT16K33 chip handles all the multiplexing, so you only need two I2C pins (SDA an...

SKU: AF-1762 | Brand: Adafruit

These breakout PCBs make it easy to use 5050-size SMD LEDs on a solderless breadboard. Solder a 5050 LED to either side of the PCB and the pins drop straight into standard 0.1″ breadboard rows — no adapter wiring need...