Skip to content

Adafruit 1.47" 320x172 Round Rectangle Color IPS TFT Display

100 units available with a short lead time.

Express post shipping available (product has a short lead time)

The Adafruit 1.47" 320×172 Round Rectangle Colour IPS TFT Display features a distinctive rounded-corner design at 250 PPI, driven by the ST7789 controller over SPI. The rounded corners are achieved by masking corner pixels — the display is addressed as a standard rectangle in RAM, so no special mapping is needed.

The breakout includes an ultra-low-dropout 3.3V regulator and 3/5V level shifter for compatibility with both 3.3V and 5V logic. A built-in microSD card slot allows loading full-colour bitmaps, and an 18-pin EYESPI FPC connector provides a solder-free connection option.

Key Features

  • 172×320 IPS Display – 16-bit colour at 250 PPI with 80° viewing angles and rounded corners
  • ST7789 SPI Driver – Frame-buffered 4-wire SPI interface works with any microcontroller
  • 3.3V/5V Compatible – Onboard regulator and level shifter for flexible logic levels
  • MicroSD Card Slot – Load bitmaps from FAT16/FAT32 formatted cards
  • EYESPI FPC Connector – 18-pin connector for solder-free integration
  • Open Source Library – Arduino graphics library with support for pixels, lines, shapes, text, and bitmaps

Package Contents

  • 1× 1.47" 320×172 round rectangle colour TFT display breakout with ST7789 driver and microSD slot
Note: MicroSD card and EYESPI FPC cable are not included.
Important: This display is designed for use under a glass or plastic cover. Without something gently holding the screen down, the backlight can eventually peel away from the TFT. If using bare, apply a small amount of craft glue (such as E6000) to the thin side edges, or use a thin piece of tape to keep the front TFT attached to the backlight.

The Adafruit 1.47" 320x172 Round Rectangle Color IPS TFT Display appears in the following collections:

SKU AF-5393