Little Bird Lorikeet WS2812B Rainbow Board
We have ✅ 2732 available of the LB-LORIKEET in our Sydney warehouse. An extra 1000 units will be available shortly.
The Little Bird Lorikeet is an RGB LED strip 5 programmable LEDs.
This Australian made board uses the WS2812B LED (better known as NeoPixels).
This Raspberry Pi HAT has a chain-able design means you can hook up several modules of these RGB LEDs to increase the length of your project. You only need a single micro-controller pin (like on Arduino, Micro:bit or Raspberry Pi Pico) to control as many as you can chain together!
Each Raspberry Pi RGB LED is addressable as it has the driver chip inside the LED.
Each one has 18mA constant current drive so the colour will be very consistent even if the voltage varies.
Each Raspberry Pi RGB LED is addressable as it has the driver chip inside the LED.
Each one has 18mA constant current drive so the colour will be very consistent even if the voltage varies.
The Lorikeet can also be used with Adafruit NeoPixel Libraries.
Not sure where to start? Check out our guides on the Lorikeet with Arduino. Alternatively, you could learn to build a temperature indicator with it and the Raspberry Pi Pico.
This Little Bird Lorikeet is made locally in Sydney, Australia!
Includes:
- 1x Little Bird Lorikeet RGB LED Strip
Specifications:
- 5V input voltage.
- WS2812B(datasheet) - RGB LED
- Single Wire Serial
- 2x 3 pin header
- Dimensions: 9mm (width) x 65mm (height) x 5mm (depth)
The Little Bird Lorikeet WS2812B Rainbow Board appears in the following collections:
SKU LB-LORIKEET
by Little Bird
