OpenMV Cam WiFi Shield
6 units will be available shortly.
The WiFi Shield gives your OpenMV Cam the ability to connect to the internet. It features an ATWINC1500 FCC Certified WiFi module that can transmit data at up to 48 Mbps making it perfect for streaming video. Your OpenMV Cam's firmware has built-in support for controlling the WiFi Shield using the network module.
Pin Functions：
P0 |
SPI data in. |
P1 |
NC |
P2 |
SPI clock. |
P3 |
SPI chip select (10K pull-up) |
P4 |
NC |
P5 |
NC |
P6 |
LED control. |
3.3 |
3.3v input |
RST |
NC |
BOOT |
NC |
SYN |
NC |
P9 |
NC |
P8 |
RS |
P7 |
RESET |
VIN |
NC |
GND |
GND |
SPECIFICATION
- Power Consumption
Idle: 80 mA @ 3.3V (180 mA w/ Cam)
Active: 100 mA @ 3.3V (220 mA w/ Cam)
- Speed
IEEE 802.11b (up to 11Mbps)
IEEE 802.11g (up to 48Mbps)
IEEE 802.11n (up to 48Mbps)
- Security
IEEE 802.11 WEP
IEEE 802.11 WPA
IEEE 802.11 WPA2
- Weight: 7g
- Length: 36mm
- Width: 27mm
- Height: 20mm
- Temperature Range
Storage: -40°C to 85°C
Operating: -40°C to 85°C
The OpenMV Cam WiFi Shield appears in the following collections:
