All Products

SKU: SF-KIT-19935

The SparkFun MicroMod mikroBUS™ Starter Kit is designed to give you just what you need to start using the MicroMod and Click ecosystems side-by-side. The core of this kit is designed around the SparkFun MicroMod mikroBUS™ Carrier Board and the SparkFun MicroMod STM32 Processor but you will also r...

SKU: DF-FIT1006 · MPN: FIT1006

##Introduction The M.2 to 2.5G Ethernet Network Card is a versatile, high-performance networking solution that enhances connectivity in systems equipped with M.2 slots, such as the LattePanda Alpha and Sigma. With the Intel I225-V chipset, it converts an M.2 slot into a high-speed 2.5G Ethernet R...

SKU: SF-GPS-14414

The SparkFun XA1110 GPS Breakout is a small I2C-supported module built for easy hookup, thanks to our Qwiic Connect System. Equipped with the XA1110 GPS module from GTOP, this board utilizes the MediaTek MT3333 chipset, loaded with specialized SparkFun firmware that enables both I2C and serial p...

SKU: SF-DEV-18426

The MyoWare® 2.0 Arduino Shield is designed to easily connect up to six MyoWare 2.0 Muscle Sensors and Link Shields using 3.5mm TRS-to-TRS audio cables. The board comes pre-populated with male headers so all you would need to do is stack it on your Arduino and connect the sensors to read up to si...

SKU: SF-DEV-21868 · MPN: DEV-21868

The MyoWare® 2.0 Power Shield is designed to easily power the MyoWare 2.0 Muscle Sensor for remote applications. The MyoWare Power Shield is equipped with snap connectors on the board so you can easily stack it to the top side of the MyoWare Muscle Sensor. Flip the switch to the ON position to gi...

SKU: SF-DEV-21326 · MPN: DEV-21326

This compact MicroMod processor board adds an STM32F405 to a compatible MicroMod Carrier Board, giving your project an ARM® Cortex®-M4 32-bit RISC core in a small, swappable M.2 module.The bevelled edge connector keys into the MicroMod M.2 socket and is secured with the screw supplied with MicroM...

SKU: AF-4415 · MPN: 4415

The Adafruit Mini GPS PA1010D is a compact 25×25 mm GPS/GNSS breakout with a built-in patch antenna, dual UART and I2C interfaces, and STEMMA QT connectors for solderless plug-and-play use. Powered by the MTK3333 chipset, it supports GPS, GLONASS, Galileo, and QZSS satellite systems with up to 10...

SKU: SF-DEV-17712

With a 32-bit ARM® Cortex®-M4 RISC core, the SparkFun STM32 Thing Plus brings power and precision to your projects. The STM32 Thing Plus provides you with an economical and easy to use development platform if you're needing more power with a minimal working space. This Thing comes flashed with t...

SKU: SF-DEV-17713

The SparkFun MicroMod STM32 Processor Board brings the power of the STM32F405 ARM Cortex-M4 microcontroller to the MicroMod ecosystem. Operating at up to 168 MHz with a hardware floating point unit (FPU) and full DSP instruction set, this processor board delivers serious performance in a compact ...

SKU: DF-FIT1005 · MPN: FIT1005

The M.2 2.5G Network Card adds high-speed Ethernet connectivity to devices with an M.2 B+M Key slot. Powered by the Intel I225-V chipset, it supports adaptive data rates up to 2500 Mbps and is compatible with LattePanda Alpha, LattePanda 3 Delta, LattePanda Sigma, and other M.2-equipped single-bo...

SKU: TB-HP9554

A versatile prototyping board with a doughnut-pad layout for building electronic circuits. Each pad is separated from its neighbours by approximately 0.5 mm, providing electrical isolation while making it easy to bridge solder across pads to create interconnections. The board features edge conne...

SKU: DF-DFR1045 · MPN: DFR1045

The DFRobot 15.6" IPS capacitive touch display is designed for single-board computers, mini PCs, and industrial HMI applications. It features a 1920×1080 resolution panel with optical bonding and anti-glare surface treatment, plus 10-point capacitive touch with a separate touch control board usin...

SKU: AF-2269 · MPN: 2269

Interested in learning how Bluetooth Low Energy works down to the packet level? Debugging your own BLE hardware, and trying to spot where something is going wrong? Or maybe you're writing a custom application for your phone or tablet that needs to talk to existing BLE hardware, but you don't k...

SKU: AF-3672 · MPN: 3672

This kit is designed for use with the electronic textiles unit in the Exploring Computer Science (ECS, exploringcs.org) introductory computing curriculum for secondary students. It contains most of the materials needed for four e-textiles projects: paper circuit, wristband, mural, and hum...

SKU: EC-SES14002K

CrowPi is an educational tool based on Raspberry Pi, designed to help people learn electronics, programming, and basic computer science. CrowPi was first released on Kickstarter in May 2018 and won a very successful campaign. The initial users spoke highly of CrowPi and left several good riviews....

SKU: EC-SES14002KA

CrowPi is an educational tool based on Raspberry Pi, designed to help people learn electronics, programming, and basic computer science. CrowPi was first released on Kickstarter in May 2018 and won a very successful campaign. The initial users spoke highly of CrowPi and left several good revie...

SKU: EC-ACA30002A

The Component Kit for Arduino E3 is a starter-friendly assortment of essential electronic components for use with any Arduino-compatible board. It includes a broad range of resistor values, LEDs in four colours, tactile switches with button caps, potentiometers, and pin headers — everything you n...

SKU: EC-ACS52001S

The W5200 Ethernet Shield adds wired internet connectivity to your Arduino. Simply stack it onto your board, connect an RJ45 cable, and start communicating over the network. The W5200 controller provides a 32 KB internal buffer — double that of the W5100 — and supports up to eight simultaneous TC...

SKU: AF-5687

Here at Adafruit, we love discovering new and exotic glowing things. Like moths to the flame, we were intrigued by this 'chip on board' ultra-flexible RGB LED Strip with a whoppin' 630 SMT LEDs per meter (210 x RGB LEDs, with 3 in series per segment), soldered side-by-side and...

SKU: SF-KIT-24115 · MPN: KIT-24115

Keep your electronics bench ready for the next enclosure, PCB stack or prototype with this 210-piece brass standoff kit. It covers two common PCB hardware sizes, M3 and M2.5, with a mix of standoff heights, nuts, screws and washers.The assortment includes both female/female and male/female stando...