All Products
AI Overview
For a STEMMA QT setup you’ll typically want a 4-pin JST-SH (1.0mm pitch) to JST-SH cable (Qwiic/STEMMA QT compatible). Pick a length that fits your build:
Standard STEMMA QT / Qwiic JST-SH to JST-SH cables
- STEMMA QT / Qwiic JST SH 4-Pin Cable (50mm) ($2.15)
- JST SH 4-Pin Cable - Qwiic Compatible - 100mm Long (100mm) ($2.15)
- STEMMA QT / Qwiic JST SH 4-Pin Cable - 200mm Long (200mm) ($2.80)
- STEMMA QT / Qwiic JST SH 4-Pin Cable - 300mm long (300mm) ($2.85)
- STEMMA QT / Qwiic JST SH 4-Pin Cable - 400mm long (400mm) ($3.25)
To plug a STEMMA QT device into 0.1" headers/breadboard
- STEMMA QT / Qwiic JST SH 4-pin Cable with Premium Female Sockets - 150mm Long (JST-SH to female sockets, 150mm) ($2.25)
- JST SH 4-Pin to Premium Male Headers Cable - Qwiic Compatible - 150mm Long (JST-SH to male headers, 150mm) ($2.25)
- Adafruit Qwiic / Stemma QT Breakout Board (breaks out JST-SH to 0.1" pins) ($4.00)
Adapters (if you’re bridging ecosystems)
- 4-pin JST PH to JST SH Cable - STEMMA / Grove to QT / Qwiic - 200mm long (STEMMA/Grove JST-PH ↔ QT/Qwiic JST-SH, 200mm) ($2.15)
- Grove to STEMMA QT / Qwiic / JST SH Cable - 100mm long (Grove ↔ JST-SH, 100mm) ($4.15)
- Qwiic Cable - Grove Adapter (150mm) (Qwiic ↔ Grove, 150mm) ($4.95)
Showing 41-60 of 90 products · 10 unavailable products hidden
Adafruit SPA06-003 Temperature + Pressure Sensor
·
The Adafruit SPA06-003 is an affordable barometric pressure and temperature sensor from Goertek, ideal for basic environmental sensing and DIY quadcopter builds. It measures 300–1100 hPa (approximately −500 to +9000 m above sea level) with ±3 Pa relative accuracy (~±0.25 m) and ±30 Pa absolute ac...
5-pin (Arduino MKR) to 4-pin JST SH STEMMA QT / Qwiic Cable - 100mm long
·
This 100mm adapter cable connects STEMMA QT / Qwiic sensors to Arduino MKR boards. It features a 4-pin JST SH (STEMMA QT / Qwiic) connector on one end and a 5-pin JST SH (Arduino MKR I2C) connector on the other, with the wiring crossed over for correct pin mapping between the two systems. Use th...
Adafruit SCD-30 - NDIR CO2 Temperature and Humidity Sensor - STEMMA QT / Qwiic
·
The Adafruit SCD-30 is a true NDIR (Non-Dispersive Infrared) CO2 sensor that directly measures carbon dioxide concentration in ambient air, rather than estimating it from volatile organic compounds. With an integrated SHT31 temperature and humidity sensor, it provides comprehensive environmental ...
Adafruit Sensirion SHTC3 Temperature Humidity Sensor - STEMMA QT / Qwiic
·
The Adafruit Sensirion SHTC3 is a compact temperature and humidity sensor with a true I2C interface, offering ±2% relative humidity and ±0.2 °C temperature accuracy. It's a cost-effective option from Sensirion's range, well suited for general-purpose environmental monitoring. The breakout includ...
Adafruit 9-DOF Absolute Orientation IMU Fusion Breakout - BNO055 - STEMMA QT / Qwiic
·
The Adafruit BNO055 STEMMA QT breakout delivers complete 9-DOF orientation sensing with onboard sensor fusion and plug-and-play I2C connectivity. The Bosch BNO055 combines an accelerometer, gyroscope, and magnetometer on a single die with an ARM Cortex-M0 processor that handles all fusion calcula...
Adafruit SGP40 Air Quality Sensor Breakout - VOC Index - STEMMA QT / Qwiic
·
The Adafruit SGP40 is a next-generation MOX (metal-oxide) gas sensor from Sensirion for indoor air quality monitoring. Unlike its predecessor the SGP30, the SGP40 outputs a raw signal that is processed through Sensirion's VOC algorithm to produce an overall air quality index from 0 to 500 — rathe...
Adafruit TMP117 ±0.1°C High Accuracy I2C Temperature Sensor - STEMMA QT / Qwiic
·
The Adafruit TMP117 is a high-accuracy I2C temperature sensor from Texas Instruments, offering 16-bit resolution (0.0078°C) and up to ±0.1°C accuracy across the most common temperature ranges. It's ideal for applications where precise temperature monitoring is critical, such as thermostats, cold ...
Adafruit Sensirion SHT40 Temperature Humidity Sensor - STEMMA QT / Qwiic
·
The Adafruit Sensirion SHT40 is a high-accuracy temperature and humidity sensor featuring a true I2C interface for simple two-wire communication. Part of the fourth generation of Sensirion's acclaimed SHT sensor family, it delivers excellent measurement precision in a compact, easy-to-use breakou...
Adafruit 24LC32 I2C EEPROM Breakout - 32Kbit / 4 KB - Stemma QT
·
The Adafruit 24LC32 I2C EEPROM Breakout provides 32 Kbit (4 KB) of reliable, non-volatile storage over a simple I2C interface. Store calibration values, MAC addresses, access tokens, or any data that needs to persist through power cycles and firmware updates — without the page-write constraints o...
Adafruit Si5351A Clock Generator with STEMMA QT - 8KHz to 160MHz
The Adafruit Si5351A Clock Generator with STEMMA QT lets you generate precise, arbitrary clock frequencies from 8 kHz to over 150 MHz using a simple I2C interface. This updated version adds STEMMA QT / Qwiic connectors for solderless hookup alongside the traditional breadboard headers. With a pr...
Adafruit QT 3V to 5V Level Booster Breakout - STEMMA QT / Qwiic
The Adafruit QT 3V to 5V Level Booster Breakout lets you connect 3.3 V STEMMA QT / Qwiic devices to sensors and peripherals that require 5 V power or logic. Most modern microcontrollers (ESP32, RP2040, SAMD, micro:bit) run at 3.3 V, but some sensors and modules still need 5 V — this board bridges...
Adafruit QT 5V to 3V Shifter Breakout - STEMMA QT / Qwiic
The Adafruit QT 5V to 3V Shifter Breakout lets you safely connect 3.3 V STEMMA QT / Qwiic sensors to 5 V microcontrollers like the Arduino Uno. Many I2C sensors and Qwiic-compatible devices are not 5 V safe — connecting them directly to a 5 V board risks damage. This breakout handles the voltage ...
ADS1015 12-Bit ADC - 4 Channel with Programmable Gain Amplifier
·
Add high-speed analog-to-digital conversion to any microcontroller with the ADS1015 breakout. This 12-bit ADC delivers 3,300 samples per second over I2C, with four single-ended or two differential input channels and a built-in programmable gain amplifier (up to 16×) for boosting small signals. T...
Adafruit VL53L1X Time of Flight Distance Sensor - ~30 to 4000mm
·
The Adafruit VL53L1X (also known as VL53L1CX) is a next-generation Time-of-Flight (ToF) distance sensor from ST with an impressive 4-metre range and LIDAR-like precision. Using an invisible laser and matching sensor, it measures how long light takes to bounce back for accurate, reliable distance ...
Adafruit HTU31 Temperature & Humidity Sensor Breakout Board
·
The Adafruit HTU31 is a third-generation I²C temperature and humidity sensor from TE, offering improved accuracy and useful extras over its predecessor, the HTU21D. With typical humidity accuracy of ±2% (at 20–100% RH, 0–70°C) and temperature accuracy of ±0.2°C (0–100°C), it delivers reliable env...
Adafruit SCD-41 - True CO2 Temperature and Humidity Sensor
·
The Adafruit SCD-41 is a photoacoustic true CO2 sensor that directly measures carbon dioxide concentration in ambient air with a wide measurement range of 400 to 5,000 ppm. It also includes integrated temperature and humidity sensing, providing comprehensive environmental data from a compact modu...
Adafruit SCD-40 - True CO2, Temperature and Humidity Sensor
·
The Adafruit SCD-40 is a photoacoustic true CO2 sensor that directly measures carbon dioxide concentration in ambient air, rather than estimating it from volatile organic compounds. It also includes integrated temperature and humidity sensing, providing comprehensive environmental data from a com...
Adafruit Triple-axis Magnetometer - LIS3MDL
·
The Adafruit LIS3MDL is a triple-axis magnetometer (compass) breakout from ST, with selectable measurement ranges from ±4 gauss (±400 µT) up to ±16 gauss (±1600 µT). It's ideal for detecting magnetic north, measuring magnetic fields, or pairing with an accelerometer/gyroscope like the LSM6DSOX to...
Adafruit Right Angle VEML7700 Lux Sensor - I2C Light Sensor
·
The Adafruit Right Angle VEML7700 Lux Sensor is an I2C ambient light sensor that measures calibrated lux values rather than arbitrary brightness numbers. Its unique right-angle orientation senses light coming parallel to the PCB surface rather than perpendicular — ideal for edge-lit enclosures an...
Adafruit VL53L4CD Time of Flight Distance Sensor - ~1 to 1300mm
·
The Adafruit VL53L4CD is a Time-of-Flight (ToF) distance sensor from ST that combines short-range and medium-range sensing in one chip. It measures from approximately 1 mm right up to 1300 mm, bridging the gap between the close-range VL6180X and the longer-range VL53L0X — all using an invisible l...