All Products
Collections
Showing 41-60 of 74 products · 26 unavailable products hidden
LIS3DH Micro Triple Axis Accelerometer Breakout (Qwiic)
·
This ultra-small Qwiic-enabled breakout adds three-axis acceleration sensing to compact projects using the LIS3DH, a smart, low-power capacitive micro-machined accelerometer with 12-bit resolution. It can be used for translation detection and is classified as a 3DoF, or 3 Degrees of Freedom, sens...
Snap-On Enclosure for Adafruit Terminal Block BFF Add-On
·
Keep your Adafruit Terminal Block BFF board protected during use and transport with this neat, minimal snap-together case.The enclosure is custom-designed and 3D printed to fit the Terminal Block BFF Add-On and its peripherals. No screws or glue are needed — snap the board into the bottom piece, ...
Adafruit Triple LED Matrix Bonnet for Raspberry Pi HUB75
·
Build large, colourful HUB75 RGB LED matrix displays from a Raspberry Pi without the usual jumper-wire tangle. This Adafruit Bonnet plugs onto the 40-pin GPIO header and drives three parallel matrix strings using the active3 pinout, so it can handle roughly three times as many panels or pixels as...
Adafruit Feather RP2350 HSTX Enclosure
·
Keep your Adafruit Feather RP2350 with HSTX Port protected during use and transport with this cute, minimal enclosure. It has been custom-designed to fit the Feather RP2350 HSTX board, including the version with 8MB of PSRAM.The case is 3D printed from translucent milky white plastic using an SLA...
Snap-on Enclosure for Adafruit Sparkle Motion
·
This cute, minimal enclosure is designed to help keep your compatible Adafruit Sparkle Motion board safe during use and transport. It has been custom-designed and 3D printed to accommodate the board’s peripherals.No screws or glue are needed: snap the board into the bottom piece, then assemble th...
Clear Snap-On Enclosure for Pixel Trinkey
·
Keep your Pixel Trinkey protected in use and during transport with this cute, minimal clear enclosure. It has been custom-designed and 3D printed to fit the Pixel Trinkey neatly.The case accommodates the reset button, 3-pin JST SH port, and the 4 terminal block outputs, so the important connectio...
Snap-on Enclosure for Adafruit TPS61169 Breakout
·
Keep your Adafruit TPS61169 Constant Current Boost Converter for LEDs protected during use and transport with this compact snap-on enclosure. It has been custom-designed and 3D printed to fit the breakout and its surrounding parts.No screws or glue are needed: snap the board into the bottom piece...
Snap-on Enclosure for Adafruit USB Type-C CC Resistor Fixer
·
Keep your Adafruit USB Type-C CC Resistor Fixer protected during use and transport with this cute, minimal snap-on enclosure. It has been custom-designed and 3D printed to suit the board and its peripherals.No screws or glue are needed: snap the board into the bottom piece, then assemble the top ...
Gravity PH2.0 to Female DuPont Tagged Cable 30cm - 5 Pack
·
These labelled jumper cables are designed to make Gravity project wiring easier to follow, especially when a build has several similar connections. Each cable carries I2C/UART pin labels so you can identify power, ground, clock/receive and data/transmit lines without relying only on wire colour o...
Gravity 4-Pin M/M DuPont Cable with Tags - 30cm (5 Pack)
·
This 5 pack of labelled 4-pin male-to-male DuPont cables is designed to make wiring Gravity modules, breadboards and development boards clearer during prototyping. Each 30 cm cable includes printed I2C and UART pin tags on the wires, helping you identify power, ground and signal lines without rel...
Gravity 4-Pin PH2.0 to DuPont Male I2C/UART Cable Pack 30cm
·
This pack gives you 10 handy 30cm Gravity sensor cables for connecting 4-pin PH2.0 modules to breadboards, IO boards or standard DuPont-style headers.Each cable has a 4-pin PH2.0 plug connector on one end and DuPont male connectors on the other, making it useful for I2C or UART wiring in maker pr...
Gravity 3-Pin PH2.0 to DuPont Male Cable Pack 30cm
·
This pack includes ten 30 cm Gravity analogue sensor cables, each with a 3-pin PH2.0 plug on one end and DuPont male connectors on the other.The cables are compatible with breadboard and DuPont wire spacing, making them handy for connecting DFRobot analogue sensors to an IO Expansion Shield or IO...
Gravity GP8600 1-Channel I2C/PWM 16-bit DAC Module
·
This GP8600 module is a high-precision digital-to-analogue converter for connecting logic-level microcontrollers to industrial-style analogue control inputs. It accepts I2C or PWM signals and converts them for applications such as 0-5V, 0-10V and 4-20mA control.It is designed for automation and c...
RTK Facet Connector Assembly v12 Replacement Part
·
This connector assembly is a replacement part for repairing a SparkFun RTK Facet or RTK Facet L-Band. It is intended for users who are comfortable opening and servicing their device.The assembly is supplied for repair work rather than general prototyping or GNSS development. If you need a high-pr...
Qwiic Alphanumeric Display - Red
·
Add letters, numbers and symbols to your project with red fourteen-segment digits that are much more flexible than a basic seven-segment display. This Qwiic display connects over I2C, so you can plug it in without soldering, without working out SDA and SCL by hand, and without adding separate vol...
Digi XBee Cellular Kit
·
Start prototyping low-power cellular IoT projects with a kit built around Digi XBee Cellular and the Qwiic Connect System. It brings together the core board, cellular module, sensor, SIM, antennas and cables needed to begin collecting data beyond normal Wi-Fi range.The included SparkFun Digi XBee...
MyoWare 2.0 Muscle Sensor
·
Control a project with muscle activity instead of buttons, levers or joysticks. The MyoWare® 2.0 Muscle Sensor is an all-in-one surface electromyography (sEMG) sensor that detects the electrical signals generated when a muscle flexes, then outputs an analogue signal representing the strength of t...
16-pin Dual Contact 0.5mm Pitch FPC ZIF Connector
·
This compact connector is a 16-pin, surface-mount ZIF FPC connector with a 0.5mm pitch, suited to connecting compatible flat flexible cables to your PCB.It uses a right-angle layout with contacts on both the top and bottom, helping support dual-contact cable arrangements in tight designs. The fli...
40-Pin 0.5mm FPC Connector - SMD, Dual-Sided Contacts
·
This 40-pin surface-mount FPC (Flat Printed Circuit) connector is a compact board-level connector for flexible flat cables and display tails. Its contacts are arranged so the cable can be inserted with the contacts facing either up or down, giving you more flexibility when laying out or assemblin...
JST PH Compatible 2.0mm Connector Kit - 220 Piece
·
This 220 piece connector assortment gives your workstation a handy supply of 2.0mm pitch JST-PH compatible plugs, sockets and crimp terminals. It is a useful kit for prototyping, repairs and making up custom leads for common maker electronics.JST-PH style connectors are widely used in electronics...