All Products

SKU: AF-5808 · MPN: ADA5808

This square TFT module is made for advanced display projects that need a high-resolution, compact screen. It has a 3.4 inch IPS panel with 480x480 full-colour pixels, giving a crisp square format with good colour visibility off-axis.The display uses an ST7701S driver with SPI for configuration an...

SKU: SF-LCD-30217 · MPN: LCD-30217

This interface board is for Red Vision projects where you want the camera and vision stack, but would rather send video to a larger external monitor than use a small onboard screen. With the LCD removed, it acts as a streamlined bridge between a SparkFun Red Vision Camera Board and an RP2350 RedB...

SKU: SF-PRT-08430

Premium female-to-female jumper wires, 155mm (6″) long, for connecting between male headers on development boards, breakout boards, and breadboards. The 0.1″ pitch connectors fit standard pin headers and can be installed side by side. Specifications Connector Type – Female to Female (F/F) Len...

SKU: AF-875 · MPN: 875

This 8×AA battery holder provides a portable power source with a built-in on/off switch and a standard 5.5 mm / 2.1 mm DC barrel plug for easy connection to Arduino boards, LED strips, motors, and other 12V devices. Use alkaline AAs for approximately 12V at 3000–4000 mAh, or rechargeable NiMH cel...

SKU: AF-798 · MPN: 798

Warning: This is a US-plug adapter and is not certified for use in Australia. Only purchase if you are using it outside Australia or with an appropriate plug adapter. A regulated 12V DC switching power adapter delivering up to 1000mA (1A). The slim profile fits into power strips without blocki...

SKU: AF-3456 · MPN: 3456

This 5×AA battery holder delivers approximately 7.5V from five AA batteries, terminated with a 2.1mm DC barrel plug (centre positive). It provides the ideal voltage for Arduino boards and other development boards with onboard 5V regulators, which typically need 1–2V of headroom above their output...

SKU: SF-DEV-09716

This is the newest revision of our FTDI Basic. We now use a SMD 6-pin header on the bottom, which makes it smaller and more compact. Functionality has remained the same. This is a basic breakout board for the FTDI FT232RL USB to serial IC. The pinout of this board matches the FTDI cable to wo...

SKU: DF-DFR0429

INTRODUCTION An ordinary DC motor requires an H Bridge to work with a microcontroller such as an UNO. For newcomers to electronics, the process of finding the right motor driver, connecting it to the MCU and learning the relevant electronic theory can be confusing an...

SKU: SF-PRT-10218

A standard 9V alkaline battery (Rayovac). Suitable for powering Arduino boards, breadboard projects, and other electronics — use with a voltage regulator to get a stable 5V output. Key Features 9V Alkaline – Standard disposable battery Rayovac Brand – Reliable performance Also Available 9...

SKU: AF-3310 · MPN: 3310

A 5.5×2.1mm DC barrel connector plug for adding a standard power connector to the end of your own wires. The outer shell unscrews to reveal solder terminals and a crimp strain relief, making it easy to wire up custom power cables. This is the most common barrel jack size used with Arduino boards...

SKU: TB-MP3312

This 12W switchmode plug pack features manually selectable voltage output (3V, 5V, 6V, 7.5V, 9V, or 12V DC) at up to 1000 mA, plus a built-in USB-A output socket for charging or powering USB devices. It comes with 7 interchangeable DC plugs to suit a wide variety of barrel connector sizes. The s...

SKU: AF-327 · MPN: 327

A 1.5-metre (5 ft) extension cable with a 5.5 / 2.1 mm barrel jack (female) on one end and a barrel plug (male) on the other. Heavy-duty 24 AWG wires handle up to 5 A, making it suitable for powering LED strips, Arduino boards, and other current-hungry projects at a distance. This cable also dou...

SKU: SF-BOB-13263

Introducing the 3.3V SparkFun FT231X Breakout board, complete with the full UART hardware handshake feature! The pin-out of this board matches the FTDI cable to work with official Arduino and cloned 3.3V Arduino boards. It can also be used for general serial applications.This board still brings o...

SKU: AF-248 · MPN: 248

A 6×AA battery holder with a 5.5mm/2.1mm DC barrel plug, ready to power Arduino boards and other electronics with a standard DC jack. Use alkaline AAs for approximately 9V at 3000–4000mAh, or rechargeable NiMH cells for 7.2V at ~2000mAh. The 9V alkaline output is ideal for boards with a 5V volta...

SKU: AF-80 · MPN: 80

A high-quality 9V battery clip with a pre-assembled 5.5mm/2.1mm centre-positive barrel connector. The moulded plastic clip covers the battery terminals to prevent short circuits, and the barrel plug connects directly to Arduino boards and other devices with a standard DC barrel jack. Key Feature...

SKU: DF-DFR0050

The DFRobot XBee USB Adapter connects XBee and Bluetooth modules to your PC via mini USB for configuration, wireless data transmission, and firmware programming. It uses an FTDI232 USB-to-UART converter chip for stable, reliable serial communication. The adapter also doubles as an FTDI programme...

SKU: SF-CAB-00512

This is a standard issue USB 2.0 cable. This is the most common A to B Male/Male type peripheral cable, the kind that’s usually used for printers. Compatible with most SFE designed USB boards as well as USB Arduino boards like the Uno.If you’re still trying to wrap your head around the world of U...

SKU: DF-DFR0250

A boost converter module that takes two AA batteries and outputs a stable 5 V supply for your circuits. Built around the TI TPS61032 boost chip, it accepts input voltages from 1.8–4.5 V and delivers up to 5 V @ 1 A — enough to power Arduino boards, sensors, and controllers directly from standard ...

SKU: SF-SEN-13963

The SparkFun LIS3DH breakout is a low-power, three-axis accelerometer with 12-bit resolution, ideal for adding motion and orientation detection to your projects. It communicates over I2C or SPI and includes three additional analogue inputs and built-in movement detection features such as tap, dou...

SKU: SF-BOB-12009

The SparkFun Bi-Directional Logic Level Converter safely translates signals between different voltage levels — stepping 5V down to 3.3V and 3.3V up to 5V on the same channel. It also works with 2.8V and 1.8V devices, making it a versatile bridge between mixed-voltage systems. Each board provides...