All Products

SKU: AF-1358 · MPN: 1358

A short adapter cable that converts a Micro-HDMI (Type D) port to a standard HDMI (Type A) socket. Plug your full-size HDMI cable into the adapter and connect it to any device with a Micro-HDMI output. Key Features Micro-HDMI to HDMI – Type D male to Type A female adapter ~15cm (6″) Cable – S...

SKU: AF-6049 · MPN: ADA6049

Add digital audio input to a capable microcontroller or single-board computer with this tiny breakout for the TDK ICS43434 I2S MEMS microphone. MEMS microphones detect sound like classic electret mics, but are much smaller and thinner, and this one outputs digital I2S audio rather than an analogu...

SKU: AF-5836 · MPN: ADA5836

This breakout adds eight analogue input channels over I2C, making it a handy way to read potentiometers, LDRs, flex sensors and other analogue or resistive sensors from boards that need more ADC inputs. It’s especially useful with single-board computers such as Raspberry Pi, which don’t include b...

SKU: AF-5245 · MPN: 5245

A DIN rail-mountable adapter with 10 spring-terminal blocks on each side, connected straight through for simplified wiring in enclosures and control panels. Accepts stranded or solid-core wire, and each block can hold multiple wires for distribution. No soldering required — push the terminal tab ...

SKU: LB-00015

This 7" LCD HDMI touchscreen display features 800×480 resolution with capacitive touch control. It works with Raspberry Pi, Banana Pi, and Banana Pro, and can also serve as a general-purpose HDMI monitor for any computer. HDMI provides the video connection while a USB cable supplies power and to...

SKU: SF-SEN-11050

This sealed digital temperature probe lets you precisely measure temperatures in wet environments with a simple 1-Wire interface. The DS18B20 provides 9 to 12-bit (configurable) temperature readings over a 1-Wire interface, so that only one wire (and ground) needs to be connected from a centra...

SKU: PL-1265

This board has been replaced by the newer MinIMU-9 v2 L3GD20 and LSM303DLHC carrier, which offers improved magnetic sensing resolution, a wider acceleration measurement range, and gyro measurements that are more resistant to audio noise and vibrations. The new version is also 25% smaller than the...

SKU: AF-157 · MPN: 157

IR sensor tuned to 38KHz, perfect for receiving commands from a TV remote control. Runs at 3V to 5V so it's great for any microcontroller.To use, connect pin 3 (all the way to the right) to 5V power, pin 2 (middle) to ground and listen on pin 1. It doesn't do any decoding of the signal, just pass...

SKU: SF-LCD-15143

The SparkFun TFT LCD Breakout features a 1.8″ colour display with 128 × 160 pixel resolution and a 4-wire SPI interface. A built-in microSD card holder on the same SPI bus provides storage for images and multimedia files while keeping the pin count low. The breakout accepts both 5 V and 3.3 V po...

SKU: AF-5136 · MPN: 5136

This Felt Padding is for if you want extra cushioning for your DIY keeb. This is specifically designed for the common "GH60" / 60% keyboard layout.You will still need a GH60 enclosure of choice, PCB, and all the components. It makes the perfect mattress support to protect your keyb...

SKU: AF-5082 · MPN: 5082

Back in my day, if you wanted a mechanical keyboard, you had to purchase a massive IBM Model M Keyboard but now you can DIY your very own compact keyboards with your very favorite layouts to make the keeb of your dreams.For all the DIY keebfans in the house here is a&nbsp...

SKU: AF-5799 · MPN: ADA5799

This long rectangular TFT module is made for advanced display projects that need a very wide bar-style screen with plenty of pixels. It has a 3.7" IPS panel with 240x960 18-bit full-colour pixels and good off-axis viewing up to 80 degrees in any direction.The display uses an ST7701S driver with S...

SKU: AF-593 · MPN: 593

The MCP23008 is an I2C 8-bit I/O port expander that adds 8 general-purpose pins to your microcontroller using just two I2C lines (shared with other I2C devices). Each pin can be configured as input, output, or input with internal pull-up, and an external interrupt output notifies you when any inp...

SKU: DF-FIT0515

A 10.1" high-resolution IPS display designed specifically for the LattePanda single-board computer. With 1200 × 1920 resolution (224 PPI), it delivers sharp, print-like text and vivid colour for tablets, infotainment systems, embedded projects, and more. The display connects to the LattePanda vi...

SKU: AF-5447 · MPN: 5447

A short-profile microSD-to-SD card adapter that sits 11 mm shorter than a standard SD card (excluding the silver lip). It protrudes far less from the card slot, reducing the risk of accidental damage — ideal for laptops, MacBooks, and embedded projects where a full-size SD adapter would stick out...

SKU: DF-SEN0251

This new released BMP388 barometric pressure sensor by DFRobot is equipped with the functionality of temperature and pressure measurement. It supports Arduino code control. Compared with the earlier version of BMP180, BMP280, and BMP388, this sensor exhibits lower power consumption, higher resolu...

SKU: DF-DRI0056 · MPN: DRI0056

This Gravity haptic driver module is built for Linear Resonant Actuators (LRAs), turning simple I2C commands into crisp tactile feedback for interactive projects. It is powered by the TM6605 driver chip and supports LRA resonant frequencies from 140Hz to 220Hz.The module includes 44 built-in vibr...

SKU: SF-SEN-17050

The MQ-9B is a CO and CH₄ gas detection sensor form Winsen. The sensing material of the MQ-9B is SnO2, which has a low conductivity in clean air. It detects carbon monoxide (1.5V) by method of cycling high and low temperature. The sensor’s conductivity gets higher with the CO and CH₄ gas concentr...

SKU: DF-DFR0506

This 7" HDMI display with capacitive touchscreen supports up to 5 touch points and uses DFRobot's USB free-driver technology — simply plug in via USB for instant touch control with no driver installation required. It works like a keyboard or mouse on any compatible system. The display supports W...

SKU: AF-5383 · MPN: 5383

This small, palm-sized battery power meter has a small display that shows off how much juice is left in your single Lithium Ion/Polymer rechargeable battery. The color display has four levels of power indication once battery capacity becomes 100%, 75%, 50%, and 25%. When power is below 25%, only ...