All Products
Showing 21-40 of 46 products · 14 unavailable products hidden
Raspberry Pi PoE+ HAT (Compatible with Raspberry Pi 4B / 3B+)
·
The Raspberry Pi PoE+ HAT adds Power over Ethernet capabilities to your Raspberry Pi 3B+ or 4B, allowing you to power and connect your Pi to the network using a single Ethernet cable. This eliminates the need for a separate power supply and reduces cable clutter in your setup. With support for t...
DIY USB Cable Parts - Right Angle Micro B Plug Up
·
If you love DIY cable-rigging, then these USB adapters are right up your alley! Making custom USB cables has never been easier. Just grab one of our ribbon cables, then swap and switch any of our USB adapters on each end using the flex cable clips. There are options a-plenty! This version i...
Raspberry Pi GPIO Shrouded Header - 2x20
A 2×20 shrouded (boxed) header designed to match the Raspberry Pi GPIO pinout. It provides a keyed, polarised connection point so you can run a ribbon cable from your Pi's GPIO to a breakout board, HAT prototype, or custom PCB without the risk of plugging in backwards. The through-hole header ha...
GPIO Header for RaspberryPi A+/B+/Pi 2/Pi 3 - Tall 2x20 Female Header
This extra-tall 2×20 female header is designed to connect custom PCBs and HATs to the Raspberry Pi GPIO pins. At 16.5 mm tall, it provides enough clearance for your board to sit above the Ethernet and USB jacks without interference. The header has 3 mm pin length on the underside, so there's no ...
DIY USB Cable Parts - Straight Type A Jack
·
If you love DIY cable-rigging, then these USB adapters are right up your alley! Making custom USB cables has never been easier. Just grab one of our ribbon cables, then swap and switch any of our USB adapters on each end using the flex cable clips. There are options a-plenty! This version i...
Gravity: Arduino Shield for Raspberry Pi B+/2B/3B/3B+/4B
The Gravity Arduino Shield for Raspberry Pi brings Arduino-compatible I/O to your Raspberry Pi B+, 2B, 3B, 3B+, or 4B. Built around the ATmega32u4 (Arduino Leonardo), it sits on top of your Pi and gives you access to all standard Arduino shields and sensors alongside the Pi's own GPIO, I2C, SPI, ...
DIY USB Cable Parts - Straight Micro B Plug
·
If you love DIY cable-rigging, then these USB adapters are right up your alley! Making custom USB cables has never been easier. Just grab one of our ribbon cables, then swap and switch any of our USB adapters on each end using the flex cable clips. There are options a-plenty! This version i...
Adafruit Perma-Proto 40-Pin Raspberry Pi Breadboard PCB Kit - with 2x20 Header
·
The Adafruit Perma-Proto 40-Pin Raspberry Pi Breadboard PCB Kit combines a full-sized prototyping board with a built-in Pi Cobbler breakout. Solder in the included 2×20 box header, connect a 40-pin GPIO cable, and you get labelled pin breakouts alongside 60 rows of breadboard-style prototyping sp...
40-pin FPC to Right Angle 2x20 IDC Female Socket Header
·
A 40-pin FPC to right-angle 2×20 IDC female socket header adapter board. Converts a standard 40-pin 0.5mm pitch FPC/FFC cable connection into a Raspberry Pi-compatible GPIO socket, allowing you to extend or relocate your Pi's GPIO header using a slim, flexible cable. Plug the female socket direc...
2x20 pin IDC Box Header - Raspberry Pi A+/B+/Pi 2/Pi 3
·
This 2×20 (40-pin) IDC box header is the matching connector for 40-pin GPIO ribbon cables used with Raspberry Pi models that have a 40-pin GPIO header. Solder it onto perfboard to create a breakout point for your Pi's GPIO, or use it in any custom PCB design. Key Features 40-Pin (2×20) – Match...
Raspberry Pi Display
·
The official Raspberry Pi 7" Touchscreen Display enables all-in-one projects like tablets, infotainment systems, kiosks, and embedded devices. The 800×480 capacitive touchscreen supports 10-finger touch and connects directly to your Pi's DSI port. With touchscreen drivers built into Raspberry Pi...
40-pin FPC to Straight 2x20 IDC Male Plug Header
·
A 40-pin FPC to straight 2×20 IDC male plug header adapter board. Converts a standard 40-pin 0.5mm pitch FPC/FFC cable connection into a male GPIO plug, allowing you to connect HATs and Bonnets at a distance from your Raspberry Pi via a slim, flexible cable. Insert the male plug into your HAT or...
40-pin 0.5mm pitch FPC Flex Cable with A-B Connections - 25cm long
·
A 25cm flexible flat cable (FFC) with 40 pins at 0.5mm pitch and Type A-B connections (contacts on opposite sides at each end). Designed for use with 40-pin FPC-to-IDC adapter PCBs to extend Raspberry Pi GPIO connections or other 40-pin ribbon cable applications. Pair this cable with compatible ...
Adafruit DPI TFT Kippah for Raspberry Pi with Touch Support
·
The Adafruit DPI TFT Kippah with Touch Support connects a 40-pin TTL TFT display directly to your Raspberry Pi's GPIO header, bypassing the need for an HDMI encoder/decoder. This version adds resistive touchscreen capability via USB, making it suitable for interactive projects and kiosks. Compat...
2x20 pin Female GPIO Header for Raspberry Pi 3/2/B+/A+ - 11mm
This 2×20 pin female GPIO header with extended 11 mm pins is designed for Raspberry Pi boards with 40-pin GPIO headers. The extra-tall pins are perfect for stacking pHAT boards on top of each other while still leaving access to the GPIO pins underneath. Key Features 40-Pin (2×20) – Matches the...
Mini Tower Kit for Raspberry Pi 5
The Mini Tower Kit from 52Pi is an all-in-one enclosure for the Raspberry Pi 5, featuring an LED ICE Tower cooler, 0.96" OLED display, sturdy ABS frame, and full port access. An updated design based on customer feedback from the previous Pi 4 tower kit. The Pi 5 sits within a strong ABS central ...
40 Pin GPIO Extension Cable for any 2x20 Pin Raspberry Pi - 150mm / 6 long
·
A 150mm (6″) GPIO extension cable for Raspberry Pi models with a 2×20 pin header. Extends all 40 GPIO pins between your Pi and a HAT, Bonnet, pHAT, or other accessory, allowing you to mount add-ons away from the board. Plug the socket end onto the Raspberry Pi's GPIO header (white mark aligned w...
Pi Foundation Display - 7 Touchscreen Display for Raspberry Pi
·
The 7” Touchscreen Display for Raspberry Pi gives users the ability to create all-in-one, integrated projects such as tablets, infotainment systems and embedded projects! The 800x480 display connects via an adapter board which handles power and signal conversion. Only two connections to the Pi...
Raspberry Pi Pico Raspberry Pi Pico (with Headers MicroUSB Cable)
The Raspberry Pi Pico is a compact, low-cost microcontroller development board built on the RP2040 — Raspberry Pi's own custom ARM silicon. This version comes with headers pre-soldered and a Micro-USB cable included, ready to use straight away. Powered by a dual-core ARM Cortex-M0+ processor run...
GPIO Terminal Block Breakout Board Module for Raspberry Pi
This terminal block breakout module comes fully assembled and soldered, ready for use with Raspberry Pi boards.It is compatible with Raspberry Pi 1 Model B+, Pi 2 Model B, Pi 3 Model B, Pi 3 Model B+, Pi 4 Model B, Pi Zero, and Pi Zero W.The module features 2.54 mm (0.1″) pitch terminal blocks su...
