All Products

SKU: AF-3028 · MPN: 3028

A Feather board without ambition is a Feather board without FeatherWings! This is the DS3231 Precision RTC FeatherWing: it adds an extremely accurate I2C-integrated Real Time Clock (RTC) with a Temperature Compensated Crystal Oscillator (TCXO)  to any Feather main board. This RTC is the m...

SKU: SF-COM-10079

RTC stands for real time clock folks. The DS3234 is a low-cost, extremely accurate SPI bus RTC with an integrated temperature compensated crystal oscillator (TCXO) and crystal.

SKU: SF-BOB-10160

Here is a real time clock based on the DS3234 Real Time Clock IC. The DS3234 is a low-cost, extremely accurate SPI bus real-time clock with an integrated temperature-compensated crystal oscillator and crystal. The RTC maintains seconds, minutes, hours, day, date, month, and year information....

SKU: SF-BOB-16281

The SparkFun RV-8803 Real Time Clock Module is a Qwiic-enabled breakout for the RV-8803 RTC, featuring a factory-calibrated temperature-compensated crystal for extremely precise timekeeping. It tracks hundredths of seconds, seconds, minutes, hours, date, month, year, and weekday, with multiple al...

SKU: AF-5186 · MPN: 5186

The Ultimate GPS Module (PA1616D) is a high-sensitivity, 66-channel GNSS module built around the MTK3333 chipset. Weighing under 6 grams and measuring just 16 × 16 × 6.4 mm, it packs impressive performance into an incredibly small package — perfect for integrating GPS into custom projects and PCB...

SKU: AF-3386 · MPN: 3386

The Adafruit PiRTC is a battery-backed real-time clock that plugs directly onto your Raspberry Pi's GPIO header, letting your Pi keep accurate time even when powered off. Built around the PCF8523 RTC with native Linux kernel support, it's ideal for data logging, time-stamping, alarms, and any pro...

SKU: AF-2324 · MPN: 2324

The Adafruit Ultimate GPS HAT adds high-quality GPS and GLONASS positioning to your Raspberry Pi. Built around a PA1616D module, it provides precise location data and a built-in real-time clock (RTC) with coin cell backup — perfect for outdoor projects, time synchronisation, and location-aware ap...

SKU: DF-SEN0704 · MPN: SEN0704

This flexible thin-film array gives robots, wearables and HCI projects a compact way to sense where pressure is being applied. It integrates 36 independent sensing points into a 15 x 15mm active area, enabling real-time pressure distribution mapping instead of a single force reading.The bendable ...

SKU: DF-DFR0999

The Gravity SCI DAQ Module is a multi-functional data acquisition module with a built-in 1.3-inch OLED screen for real-time sensor readings. It supports over 20 common sensor types including temperature, humidity, and barometric pressure — with automatic sensor recognition and a standardised I2C ...

SKU: AF-3296 · MPN: 3296

The Adafruit DS1307 Real Time Clock breakout keeps accurate time even when your microcontroller loses power or is reprogrammed. This battery-backed I2C RTC is one of the most widely used clock chips, making it a reliable choice for datalogging, alarms, timers, and clock projects. The DS1307 requ...

SKU: AF-2922 · MPN: 2922

Add datalogging capability to any Feather board with the Adalogger FeatherWing. This add-on combines a battery-backed real-time clock (PCF8523) with a microSD card socket, giving your project accurate timestamps and local data storage in one compact wing. The RTC communicates over I2C with a 32 ...

SKU: WS-30697 · MPN: 30697

ESP32-S3 2.1inch Capacitive Touch Round Display Development BoardUnleash Your Creativity with Cutting-Edge TechnologyUnveiling the ultimate tool for innovators, the ESP32-S3 Round Display Development Board – your perfect companion for designing and prototyping next-gen smart devices. Dive into th...

SKU: SF-WRL-18594

The SparkFun MicroMod DA16200 Function Board adds fully integrated Wi-Fi connectivity to any MicroMod project. Built around the DA16200 module with an Arm Cortex-M4F processor, it includes a 40 MHz crystal oscillator, 32.768 kHz RTC, 4 MB flash memory, and an on-board chip antenna — everything ne...

SKU: DF-DFR0151

The DS1307 Real Time Clock module developed by one of our designers: Waiman. The module comes fully assembled and pre-programmed with the current time (ok, so it's our current time - MST). The included Lithium coin cell battery (CR1225 41mAh) will run the module for a minimum of 9 years (17 ...

SKU: SF-DEV-19957

The SparkFun AzureWave Thing Plus is a Feather form-factor development board equipped with the AW-CU488. The module features the Realtek RTL8721DM integrated single-chip low-power dual-band (2.4GHz and 5GHz) wireless LAN communication controller. It also consists of a dual processor core: Rea...

SKU: DF-DFR1083 · MPN: DFR1083

##Introduction The Arduino Portenta C33 is a streamlined module that offers the high performance of the Arduino Portenta family at a lower price point, thanks to optimizations and streamlined features. Ideal to developing cost-effective, real-time applications, the Portenta C33 features the ARM® ...

SKU: DF-TEL0067

The RN-XV module by Roving Networks is a certified Wi-Fi solution especially designed for customer who want to migrate their existing 802.15.4 architecture to a standard TCP/IP based platform without having to redesign their existing hardware. In other words, if your project is set up for X...

SKU: SF-PRT-27882 · MPN: PRT-27882

This adapter lets you use new Alchitry V2 boards with older Alchitry V1 add-on boards. It is designed as a bridge between the updated V2 connector layout and the original V1-style add-on ecosystem.The board has the new style connectors on the bottom for the V2 board, and the old style connectors ...

SKU: AF-5400 · MPN: 5400

The Adafruit ESP32 Feather V2 is a major redesign of the original HUZZAH32 ESP32 Feather, featuring 8 MB flash, 2 MB PSRAM, USB-C, a STEMMA QT port, a NeoPixel, and a user button. The dual-core ESP32 at 240 MHz provides Wi-Fi and Bluetooth Classic/LE connectivity for wireless and IoT projects. D...

SKU: DF-DFR0600

PYNQ-Z2 is a FPGA development board based on ZYNQ  XC7Z020 FPGA, intensively designed to support PYNQ, a new open-sources framework that enables embedded programmers to explore the possibilities of xilinx ZYNQ SoCs without having to design programming logic circuits. Benefiting from progr...