All Products
Showing 1-20 of 52 products · 8 unavailable products hidden
DSS-P05 Standard Servo (5kg)
The DSS-P05 is a standard-size servo with up to 4.2 kg·cm of torque at 6V, suitable for robot heads, arms, biped robots, and other projects requiring reliable 180° rotation. Specifications Voltage – 4.8–6.0V Torque – 3.5 kg·cm (4.8V) / 4.2 kg·cm (6.0V) Speed – 0.17 sec/60° (4.8V) / 0.12 sec/...
High Torque Waterproof Digital Servo with Magnetic Encoder (35KG, 360°, IP54)
·
This high-torque waterproof digital servo delivers up to 35 kg·cm of torque at 7.4V and features a 12-bit magnetic encoder for precise absolute position control across a full 360° range. Built for demanding robotics and automation applications, it combines reinforced steel gears, dual ball bearin...
DFRobot SEN0704 6x6 Flexible Tactile Pressure Sensor - UART
·
This flexible thin-film array gives robots, wearables and HCI projects a compact way to sense where pressure is being applied. It integrates 36 independent sensing points into a 15 x 15mm active area, enabling real-time pressure distribution mapping instead of a single force reading.The bendable ...
DF05BB Tilt/Pan Kit (5kg)
A pan-and-tilt servo assembly for horizontal surface mounting, built with two DFRobot DF05BB ball-bearing servos and aluminium brackets. Ideal for camera gimbals, sensor heads, and small remote-controlled robot platforms. Key Features Two-Axis Movement – Pan and tilt via dual servo motors DF0...
9g 270°Metal Servo with Analog Feedback (1.5kg)
A 9g micro servo with an extended 270° rotation range, metal gears, and built-in analog feedback (0–3.3V). The wider rotation range makes it suitable for applications requiring more travel than a standard 180° servo, while the analog feedback signal enables closed-loop position control via an MCU...
REV Robotics Smart Robot Servo
·
This configurable metal-geared servo can be used as a standard angular servo, a custom-limit angular servo, or a continuous-rotation actuator. It accepts conventional PWM input, so it can drop into many robotics builds while adding useful reconfiguration options when used with the optional REV SR...
Standard Nylon Gear Servo For Remote Control Model
High impact plastic is designed to withstand minor crashes and the effects of model fuelThrough-the-hole Circuit Board Plating - Eliminates the need for wires or leadsHeavy Duty Output Shaft - Designed not to break, and offers versatility when installing the servo hornNylon gearsSpecifications...
Load Cell - 5kg, Straight Bar (TAL220B)
A straight bar load cell (strain gauge) that translates up to 5kg of force into an electrical signal. Made from aluminium alloy with four strain gauges in a Wheatstone bridge configuration, it measures electrical resistance changes proportional to the applied load. Use it to measure object weigh...
Metal DC Geared Motor - 6V 133RPM 4.5kg.cm
This metal DC geared motor features a 45:1 metal gear reducer in a compact form factor, delivering up to 4.5 kg·cm of stall torque at 133 RPM. The all-metal gearbox provides durability and reliability for robotics, drive systems, and mechanical projects. The motor operates on 2–7.5 V (rated 6 V)...
Micro Servo - High Powered, High Torque Metal Gear
·
This high-powered micro servo packs nearly double the stall torque of standard micro servos into a compact metal-geared package. With approximately 180° of rotation, it works with any standard servo library, driver, or controller — including the Arduino Servo library, motor shields, and 16-channe...
Servo - Generic, 180° Rotation (Sub-Micro Size)
·
Here is a simple, low-cost servo for all your mechatronic needs. This little guy is able to take in 6 volts and deliver 1.5kg/cm (at 6V). of maximum torque at 0.09 sec/60° (at 6V). This small servo comes with a standard 3 pin power and control cable, six arms and six screws. Note: This is the s...
Cherokey:4WD Basic Arduino Robot Building Kit
The Cherokey 4WD Basic Arduino Robot Kit is a perfect wheeled robot platform to build your own robot and to get started with Arduino Robot. With just a few simple steps of assembling the hardware and tuning the software, and you'll learn all about Arduino, robotics, sensors, bluetooth comm...
Servo - Generic High Torque Continuous Rotation (Standard Size)
Here, for all your mechatronic needs, is a simple, high quality continuous continuous rotation servo motor. This servo is able to take in 6 volts and deliver 66.7 oz-in. of maximum torque at 70 r/min. A standard 3-pin power and control cable is attached and all hardware listed below is included...
Servo - Generic High Torque (Standard Size)
A reliable, high-torque standard-size servo (FS5106B) with dual ball bearings and nylon gears. Delivering up to 83.47 oz-in of torque at 6V with a speed of 0.16 sec/60°, it's a versatile choice for robotics, RC, and mechatronics projects. Features a standard 3-pin power and control cable with 18...
Servo - Generic (Sub-Micro Size)
Here is a simple, low-cost, high quality servo for all your mechatronic needs. This servo is very similar in size and specifications to the Hitec HS-55. This little guy is able to take in 6 volts and deliver 20.8 oz-in. of maximum torque at 0.10 sec/60° This small servo comes with a standard 3 ...
9g Metal Gear Micro Servo (1.8Kg )
A compact 9g micro servo with metal gears, delivering 1.8 kgf·cm of torque at 4.8V. The metal gear train provides significantly better durability than plastic versions, especially in robotics applications where the servo is in near-constant motion. With a 180° operating angle and a 320:1 reducti...
DF15RMG Tilt Kit (20kg)
This is a most powerful standard servo motor from DFRobot so far. A servomotor is a rotary actuator that allows precise control of angular position. This is specifically designed for the robotics application which requires high quality in a variety of the servo features. The DF15RMG stan...
Actuonix PQ12-100-6-R Micro-Actuator
The Actuonix PQ12-100-6-R is a micro linear actuator with a servo-compatible PWM interface. Weighing just 22 grams with a 20mm stroke, it delivers up to 50N (~5 kg) of force thanks to its 100:1 gear ratio — making it one of the most powerful actuators of its size. The PQ12-R series operates as a...
6Kg 180 Clutch Servo
The 6 kg 180° Clutch Servo from DFRobot features a built-in clutch mechanism and electronic protection, making it ideal for robotics and mechanical projects where the servo may encounter external forces or stalling conditions. When the servo's angle is changed by external forces during operation...
Analog Feedback Micro Servo - Plastic Gear
·
A plastic-geared micro servo with an extra trick — a fourth wire brings out the internal potentiometer feedback signal, letting you read the servo's actual position via an analog input. This feedback capability enables motion recording, playback, and improved stability in robotics applications. ...
