All Products
AI Overview
Here are solid picks for a “motor driver”, grouped by motor type and power level.
Brushed DC motors (most common)
- For 2 small DC motors (robotics) with efficient MOSFET H-bridges: TB6612FNG Dual Motor Driver Carrier (~1.2A/channel class) ($17.65) or the plug-and-play Gravity version 2x1.2A DC Motor Driver with Gravity Connector (TB6612FNG) ($13.90).
- For 2 DC motors or 1 stepper using a popular dual H-bridge breakout: Adafruit DRV8833 DC/Stepper Motor Driver Breakout Board (up to 1.2A/channel class) ($12.50).
- For a single DC motor in a compact carrier: MP6550 Single Brushed DC Motor Driver Carrier (1.8–22V, ~1.7A continuous class) ($9.55) or DRV8838 Single Brushed DC Motor Driver Carrier ($6.40).
Higher-current / higher-voltage brushed DC
- For the common L298N style dual driver module with screw terminals: L298N Dual H-Bridge Motor Driver Board ($15.45) or the higher-current controller board MDV 2x2A DC Motor Controller (up to 2A/channel) ($22.50).
- For very high power robots: Sabertooth Dual 25A DC Motor Driver (25A continuous/channel) ($263.75).
Stepper motors
- For larger steppers with wide supply range: TB6600 arduino Stepper Motor Driver (9–42V class driver) ($30.15).
Brushless (BLDC)
- For BLDC with smooth FOC (Field-Oriented Control): SimpleFOCmini Brushless DC Motor Driver Board ($14.50).
What motor type are you driving?
About how much current do you need per motor channel?
Collections
Showing 81-100 of 100 products
Stepper Motor: Bipolar, 200 Steps/Rev, 42x38mm, 2.8V, 1.7 A/Phase
A NEMA 17 hybrid bipolar stepper motor with a 1.8° step angle (200 steps per revolution). Each phase draws 1.7 A at 2.8 V, delivering a holding torque of 3.7 kg·cm. Four colour-coded wires with bare leads connect to two coils: black/green for one coil, red/blue for the other. Best driven with a ...
Flotilla - Motor
The Motor module is a 298:1 ratio motor that has full speed control, and is bi-directional. It's perfect for driving robots, as a tiny fan, or in LEGO® projects. We have a LEGO® compatible axle adaptor available too! Features 298:1 ratio motor DRV8830 motor driver ci...
TT Motor All-Metal Gearbox - 1:90 Gear Ratio
·
These durable (but affordable!) gearbox motors (also known as 'TT' motors) are an easy, low-cost way to get your projects moving. This is a TT DC All-Metal Gearbox Motor with a gear ratio of 1:90 about double of the 'standard' 1:48 ratio. That gives them higher torque but slower...
TT Motor Bi-Metal Gearbox - 1:90 Gear Ratio
·
These durable (but affordable!) gearbox motors (also known as 'TT' motors) are an easy, low-cost way to get your projects moving. This is a TT DC Bi-Metal Gearbox Motor with a gear ratio of 1:90 about double of the 'standard' 1:48 ratio. That gives them higher torque but slower ...
CD DVD Spindle Motor
·
What's this? A record player for ants?? Not at all! This is a DVD/CD Spindle Motor, that thing that's inside a CD or DVD player, that turns the disc around really fast. These motors have some great benefits that make them easier to use than '130' style DC hobby motors For one, they're mostly ...
Geared DC Motor with Magnetic Encoder Outputs - 7 VDC 1:20 Ratio
·
This geared DC motor comes with a built-in magnetic encoder — a magnetic wheel and two Hall effect sensors are already attached to the motor body, giving you quadrature feedback for both speed and direction without any extra wiring or mounting. It's the ideal starting point for closed-loop motor ...
4 Channel I2C Motor Shield-V1.1
This motor shield uses dual TB6612 MOSFET drivers and a PCA9685PW I2C PWM controller to drive up to 4 DC motors or 2 stepper motors from an Arduino or compatible board. All motor control and speed management is handled via the I2C bus, freeing up digital pins for other uses. The stackable design...
Air Pump and Vacuum DC Motor - 4.5 V and 2.5 LPM - ZR370-02PM
·
A simple DC-powered air pump for inflatables and air-powered projects. Power it with ~4.5V (5V works fine) and it draws about 500mA, making it easy to run from the same supply as your DC motors or servos. The pump sucks air in from the side of the casing and pushes it out the tubing port. Contro...
Air Pump and Vacuum DC Motor - 4.5V and 1.8 LPM - ZR320-02PM
·
A compact DC-powered air pump for inflatables and air-powered projects. Power it with ~4.5V (5V works fine) and it draws about 600mA, making it easy to run from the same supply as your DC motors or servos. The pump sucks air in from the side of the casing and pushes it out the tubing port. Contr...
SparkFun Qwiic Haptic Driver - DA7280
The SparkFun Qwiic Haptic Driver pairs a compact Linear Resonant Actuator (LRA) vibration motor with Dialog Semiconductor's DA7280 motor driver IC for projects that require haptic feedback. Control the vibration motor via I2C, PWM, or a combination of three general-purpose input pins. Qwiic conn...
N20 DC Motor with Magnetic Encoder - 6V with 1:50 Gear Ratio
·
This N20 micro geared DC motor includes a built-in magnetic encoder wheel and two Hall effect sensors, providing speed and direction feedback without additional wiring. The compact N20 form factor makes it well suited for small robotics projects requiring precise motor control. The motor runs on...
N20 DC Motor with Magnetic Encoder - 6V with 1:298 Gear Ratio
·
This N20 micro DC gearmotor includes a built-in magnetic encoder with two Hall effect sensors, providing both speed and direction feedback without additional wiring. The compact N20 form factor makes it ideal for small robotics projects where precise motor control is needed. The magnetic encoder...
N20 DC Motor with Magnetic Encoder - 6V with 1:100 Gear Ratio
·
The first step in a robotics project is to get a motor spinning. Once you've done that you quickly learn that not all motors go the same speed, even if they are the same part number! There are always variations that relate to voltage, environment, and manufacturing changes. So, the second step is...
Motor SHIM for Pico
A compact motor driver add-on for the Raspberry Pi Pico, based on the DRV8833 dual H-bridge. Solders directly to the back of a Pico and provides two JST-ZH connectors for micro metal gearmotors. Also includes a user button and a Qw/ST (Qwiic/STEMMA QT) connector for attaching I²C breakout boards....
HRB8825 Stepper Motor HAT For Raspberry Pi
HRB8825 Stepper Motor HAT For Raspberry Pi, Drives Two Stepper Motors, Up To 1/32 Microstepping Stepper Motor HAT (B) Alternative Solution Of Stepper Motor HAT, Drives Two Stepper Motors, Up To 1/32 Microstepping For 3D Printer, Sculpturing machine, Mechanical arm... Features At A ...
Motoron M3H256 Triple Motor Controller for Raspberry Pi (No Connectors or Standoffs)
The Motoron M3H256 Triple Motor Controller makes it easy to control DC motors from a Raspberry Pi (Model B+ or newer) through an I²C interface. Each module can independently control up to three motors, and multiple Motoron boards can be stacked on top of the same Raspberry Pi for projects that ne...
Motorized Slide Potentiometer - 10KΩ Linear with 5V DC Motor
·
A 10KΩ linear slide potentiometer with a built-in geared DC motor underneath the slider. The motor can move the wiper up and down programmatically, while the slider also moves freely by hand when the motor is unpowered. This combination allows both manual and digital control — commonly seen in pr...
Motoron M3S256 Triple Motor Controller Shield for Arduino (Connectors Soldered)
The Motoron M3S256 Triple Motor Controller Shield for Arduino makes it easy to control DC motors from an Arduino or Arduino-compatible board through an I²C interface. Each module can independently control up to three motors, and multiple shields can be stacked on top of the same Arduino for proje...
Motoron M2H18v18 Dual High-Power Motor Controller Kit for Raspberry Pi
The Motoron M2H family of dual high-power motor controller add-on boards makes it easy to control up two bidirectional, brushed DC motors with a compatible Raspberry Pi (Model B+ or newer). The M2H controllers are designed to stack on top of a Raspberry Pi (Model B+ or newer), similar to a HAT...
TT Motor Bi-Metal Gearbox Double Sided Axle and 1:90 Gear Ratio
·
These durable (but affordable!) gearbox motors (also known as 'TT' motors) are an easy, low-cost way to get your projects moving. This is a TT DC Bi-Metal Gearbox Motor with a gear ratio of 1:90, about double the 'standard' 1:48 ratio. That gives them higher torque but slower rotational speed. Si...
