All Products
Showing 81-100 of 100 products
Neon Light EL wire 1000mmx2.3mm Orange
This is a long flexible orange cable. It is called EL wire or electroluminescent wire. Once being charged with appropriate voltage, it can emit bright orangelight and the wire will not be heated. It is similar to a long thin tube full of fluorecent liquid. In the one end, it is terminated with a ...
Adafruit eInk Feather Friend with 32KB SRAM
·
The Adafruit eInk Feather Friend is a FeatherWing-format driver board for eInk/e-paper displays with a standard 24-pin FPC connector. It includes all the power supply circuitry and level shifting needed to connect your favourite display (up to tri-colour 4.2") to any Feather board via SPI, plus a...
CAN-BUS Shield
CAN-BUS is a common industrial bus because of its long travel distance, medium communication speed and high reliability. It is commonly found on modern machine tools and as an automotive diagnostic bus. This CAN-BUS Shield adopts MCP2515 CAN Bus controller with SPI interface and MCP2551 CAN tr...
Adafruit AHT20 - Temperature Humidity Sensor Breakout Board - STEMMA QT / Qwiic
·
The Adafruit AHT20 is an affordable I2C temperature and humidity sensor from the makers of the popular DHT22. It delivers reliable readings with standard I2C communication, making it easy to use with any Arduino, Raspberry Pi or other microcontroller. This STEMMA QT version features solderless c...
Adafruit 9-DOF Absolute Orientation IMU Fusion Breakout - BNO055 - STEMMA QT / Qwiic
·
The Adafruit BNO055 STEMMA QT breakout delivers complete 9-DOF orientation sensing with onboard sensor fusion and plug-and-play I2C connectivity. The Bosch BNO055 combines an accelerometer, gyroscope, and magnetometer on a single die with an ARM Cortex-M0 processor that handles all fusion calcula...
SparkFun OpenLog Artemis
The SparkFun OpenLog Artemis is an open source data logger that comes preprogrammed to automatically log IMU, GPS, serial data, and various pressure, humidity, and distance sensors. All without writing a single line of code! OpenLog Artemis, or "OLA," automatically detects, configures, and logs Q...
Power over Ethernet HAT (B) for Raspberry Pi 3B+/4B and 802.3af PoE network
POE HAT FOR RASPBERRY PI Power Over Ethernet HAT For Raspberry Pi 3B+/4B, 802.3af-Compliant(Any Backward-Compatible Future Versions Will Be Supported As Well) OLED for real-time monitoring temperature, IP, and fan status The PoE HAT (B) is a 802.3af-compliant Power Over Ethernet accessory...
NeoPixel RGBW Mini Button PCB - Pack of 10
·
These are the smallest NeoPixel breakouts around! Tiny, bright RGB+White pixels to your project. These little PCBs are only 9.1mm x 9.1mm and have two sets of three pads on the back for soldering wires. These ultra-bright LEDs have a constant-current driver cooked right into the LED package! T...
Adafruit Feather M4 CAN Express with ATSAME51
·
The Feather M4 CAN Express upgrades the popular Feather M4 platform with the ATSAME51J19 processor, which adds built-in CAN bus support. It features a 120 MHz Cortex M4 with hardware floating point and DSP instructions, 512 KB flash, 192 KB RAM, and an on-board CAN transceiver with 5V boost conve...
UART TTL to RS485 Two-way Converter
This is a module that allows the TTL interface of the microcontroller to be transferred to the RS485 module. It is generally used for industrial automation. This module adds lightning protection design and anti-jamming design. When we use it in the field and carry out long distance transmission, ...
RS232 Connector Expansion Shield for LattePanda V1
An industrial-grade RS232 expansion shield designed specifically for the LattePanda V1. Adds one RS232 port (D-Sub 9-pin male) with signal isolation, power isolation, and surge protection for reliable serial communication in demanding environments. Uses a stackable connection with copper standof...
Adafruit AW9523 GPIO Expander and LED Driver Breakout - STEMMA QT / Qwiic
·
The Adafruit AW9523 GPIO Expander and LED Driver Breakout adds 16 I/O pins to any I2C-capable microcontroller or single-board computer. What sets this expander apart is its built-in 256-step linear constant-current LED dimming — connect LEDs directly without current-limiting resistors for smooth,...
Industrial Isolated USB To RS485 Converter
This is an industrial-grade USB to RS485 module with a DC voltage output of up to 36V, which is applicable to industrial instruments that require a high-voltage power supply. The converter can be directly powered by the USB bus, no external power supply required.With strong compatibility, t...
SparkFun Qwiic Alphanumeric Kit
We are quite familiar with seven-segment displays. We see them on our alarm clocks, ovens, and microwaves. By adding more segments to each digit you can display more than just numbers! These fourteen-segment digits allow you to display all sorts of numbers, characters, and symbols. With Qwiic, si...
SparkFun QwiicBus - EndPoint
The SparkFun QwiicBus EndPoint is the fastest and easiest way to extend the range of your I2C communication bus. The breakout uses NXP’s PCA9615 IC, which converts the two default I2C signals into four differential signals, two for SCL and two for SDA. The differential signals are sent over an Et...
SparkFun QwiicBus Kit
The SparkFun QwiicBus Kit comes with everything you need to get started with the SparkFun QwiicBus system in one handy package. The kit includes two QwiicBus EndPoints, one MidPoint and two 3ft Ethernet cables. The SparkFun QwiicBus EndPoint is the fastest and easiest way to extend the range of ...
Adafruit 24LC32 I2C EEPROM Breakout - 32Kbit / 4 KB - Stemma QT
·
The Adafruit 24LC32 I2C EEPROM Breakout provides 32 Kbit (4 KB) of reliable, non-volatile storage over a simple I2C interface. Store calibration values, MAC addresses, access tokens, or any data that needs to persist through power cycles and firmware updates — without the page-write constraints o...
Adafruit ATtiny817 Breakout with seesaw - STEMMA QT / Qwiic
·
The Adafruit ATtiny817 Breakout with seesaw is a compact development board that combines an ATtiny817 microcontroller with the Adafruit seesaw I2C framework and STEMMA QT connectivity. Pre-programmed with seesaw firmware, it acts as an I2C-controlled co-processor — adding GPIO, ADC, PWM, and NeoP...
Adafruit NeoSlider I2C QT Slide Potentiometer with 4 NeoPixels
·
Add a smooth slide control to any I2C project with the Adafruit NeoSlider — a 75 mm linear slide potentiometer with four RGB NeoPixel underlights, all communicating over I2C via the onboard seesaw microcontroller. No analog pins needed on your main board. Thanks to the STEMMA QT / Qwiic connecto...
Adafruit HTU31 Temperature & Humidity Sensor Breakout Board
·
The Adafruit HTU31 is a third-generation I²C temperature and humidity sensor from TE, offering improved accuracy and useful extras over its predecessor, the HTU21D. With typical humidity accuracy of ±2% (at 20–100% RH, 0–70°C) and temperature accuracy of ±0.2°C (0–100°C), it delivers reliable env...
