All Products

SKU: AF-2348 · MPN: 2348

The Adafruit DC & Stepper Motor HAT drives up to 4 DC motors or 2 stepper motors from your Raspberry Pi, with full PWM speed control. It uses a dedicated PWM driver chip over I2C, so only two pins (SDA/SCL) are needed — leaving the rest free for other I2C devices or HATs. The TB6612 MOSFET motor...

SKU: AF-2340 · MPN: 2340

The Adafruit Capacitive Touch HAT adds 12 capacitive touch sensors to your Raspberry Pi using the MPR121 touch controller over I2C. Each sensor has a figure-8 hole designed for alligator clip connections — attach clips to the HAT and the other end to anything conductive (metal, fruit, vegetables,...

SKU: AF-2345 · MPN: 2345

The Adafruit RGB Matrix HAT + RTC makes it easy to drive HUB75-type RGB LED matrices from your Raspberry Pi. This HAT plugs onto any Pi with a 40-pin GPIO header and includes a DS1307 real-time clock, so your Pi can keep accurate time even after reboots or power loss — perfect for clock and time-...

SKU: AF-2324 · MPN: 2324

The Adafruit Ultimate GPS HAT adds high-quality GPS and GLONASS positioning to your Raspberry Pi. Built around a PA1616D module, it provides precise location data and a built-in real-time clock (RTC) with coin cell backup — perfect for outdoor projects, time synchronisation, and location-aware ap...

SKU: AF-2314 · MPN: 2314

The Adafruit Perma-Proto HAT for Pi Mini Kit with EEPROM is a full-sized prototyping daughter board for any Raspberry Pi with a 2×20 GPIO header. It provides a grid of 0.1″ soldering holes connected in a familiar breadboard pattern, plus a pre-soldered 24C32 I2C EEPROM for self-identifying HAT co...

SKU: AF-2315 · MPN: 2315

The Adafruit PiTFT 2.2" HAT Mini Kit is a compact colour display that plugs directly onto your Raspberry Pi's GPIO header. Featuring a 2.2-inch 320×240 pixel TFT with 16-bit colour, it's perfect for use as a mini console, desktop display, image viewer, or video player — all driven over the Pi's h...

SKU: AF-2310 · MPN: 2310

The Adafruit Perma-Proto HAT for Pi Mini Kit is a full-sized prototyping daughter board for any Raspberry Pi with a 2×20 GPIO header (Pi Zero, A+, B+, Pi 2, 3, 4, 5). It provides a grid of 0.1″ soldering holes connected in a familiar breadboard pattern — making it easy to transfer circuits from a...

SKU: AF-2243 · MPN: 2243

A short-profile 2×20 female through-hole header for connecting Raspberry Pi HATs with minimal height above the board. This custom header provides a slimmer fit than standard-height GPIO headers, ideal for compact enclosures and low-profile builds. Compatible with any Raspberry Pi model featuring...

SKU: AF-2187 · MPN: 2187

A custom-made 2×20 short female header designed for surface-mount (SMT) Raspberry Pi HAT designs. This header provides the slimmest possible profile when you need a low-clearance connection between your HAT and a Raspberry Pi. While it requires SMT soldering skills (more challenging than standar...

SKU: SF-DEV-14459

The SparkFun Qwiic HAT for Raspberry Pi is the quickest and easiest way to enter into SparkFun’s Qwiic ecosystem while still using that Raspberry Pi that you’ve come to know and love. The Qwiic HAT connects the I2C bus (GND, 3.3V, SDA and SCL) on your Raspberry Pi to an array of Qwiic connectors...

SKU: AF-3957 · MPN: 3957

The Adafruit CRICKIT HAT is a robotics and electronics driver board that plugs directly onto any Raspberry Pi with a 2×20 GPIO header. It adds motor drivers, servo outputs, capacitive touch inputs, a level-shifted NeoPixel driver, and a 3W I2S audio amplifier — all managed over I2C via the Adafru...

SKU: PR-PIM113

The Display-O-Tron HAT adds a 16×3 character LCD display, 6-zone RGB LED backlight, bar graph LEDs, and six capacitive touch buttons to your Raspberry Pi — all in one slim HAT-format board. Ideal for internet radio controls, home automation dashboards, and interactive Pi projects. Key Features ...

SKU: PR-PIM179

The Pimoroni Display-O-Tron HAT packs a 16×3 character LCD display, six-zone RGB backlight, bar graph LEDs, and six capacitive touch buttons into one slim HAT for Raspberry Pi. It's ideal for internet radio, home automation dashboards, and any project that needs a compact display with input contr...

SKU: PR-PIM089

Everything you need to get started with Explorer HAT Pro or Explorer pHAT! The parts kit contains LEDs, a buzzer, resistors and capacitors, rotary potentiometers (dials), a shift register, jumper wires, and even an analog temperature sensor! Use the parts kit to build a PIN entry system, traff...

SKU: PR-PIM175

The Explorer HAT Pro is a feature-packed add-on board for Raspberry Pi that brings together digital I/O, analog inputs, capacitive touch, motor drivers, LEDs, and a mini breadboard — all on a single HAT. It's ideal for robotics, games, science experiments, and learning electronics with the Pi. K...

SKU: PR-PIM400

A 128x64 pixel, 2.15" LCD display with snazzy six-zone RGB backlight and six capacitive touch buttons. GFX HAT makes an ideal display and interface for your headless Pi projects. GFX HAT riffs off our beloved Display-O-Tron HAT, but gives you the flexibility of individual pixels, letting you d...

SKU: PI-COM1101

These 40-pin 2x20 male headers can be used on a Pi Zero or a pHAT to break out the pins.You can choose either straight or at a 90° angle.Add one to a Pi Zero for compatibility with HATs (which use a female header).Can be used to solder a Pi Zero and pHAT permanently together.The 90° version is gr...

SKU: PR-PIM169

The Mini Black HAT Hack3r is a compact breakout board that lets you access all 40 GPIO pins on your Raspberry Pi while a HAT or pHAT is attached. It connects between your Pi and the HAT via a ribbon cable, bringing every pin out to clearly labelled headers for probing, debugging, or connecting ad...

SKU: PR-PIM170

The Mini Black HAT Hack3r lets you access all GPIO pins while running a HAT or pHAT on your Raspberry Pi. Connect it via the included 40-pin ribbon cable to detach and debug your HAT projects, or combine a HAT with other circuits on a breadboard. Every GPIO pin is clearly labelled with its funct...

SKU: PR-PIM171

A handy breakout tool that lets you access all 40 GPIO pins while a HAT or pHAT is connected to your Raspberry Pi. Plug in your HAT, connect the ribbon cable to your Pi, and probe, debug, or extend any pin with ease. Key Features HAT & pHAT Landing Areas – Accepts both form factors with PCB st...