All Products
Showing 61-80 of 100 products
Adafruit Round RGB TTL TFT Display - 2.1" 480x480 No Touch
·
This round TFT module is aimed at advanced display projects that need a compact circular screen with plenty of pixels. The 2.1" diagonal IPS panel provides 480x480 16-bit full-colour output, with good colour visibility up to 80 degrees off-axis in any direction.This version does not include a tou...
Adafruit 3.4in Square RGB-666 TTL TFT Display with Touchscreen
·
This square TFT module is made for advanced display projects that need a high-resolution, compact screen. It has a 3.4 inch IPS panel with 480x480 full-colour pixels, giving a crisp square format with good colour visibility off-axis.The display uses an ST7701S driver with SPI for configuration an...
1.9" IPS Touch LCD Display – 172x320, SPI/I2C, 262K Colors
·
A 1.9" IPS touch LCD display module with 172 × 320 resolution and 262K colours. It combines an ST7789V2 display driver with a CST816 capacitive touch controller, providing both vivid visuals and responsive touch input in a compact form factor. The module communicates via SPI (display) and I2C (t...
Adafruit ESP32-S3 Feather with STEMMA QT / Qwiic
·
The Adafruit ESP32-S3 Feather with STEMMA QT brings the dual-core ESP32-S3 to the Feather ecosystem with Wi-Fi, Bluetooth LE, and native USB. This version comes with 8 MB flash, 512 KB SRAM, and no PSRAM — suitable for ESP-IDF, Arduino, and lighter CircuitPython projects that don't require large ...
ThinkNode M2-Meshtastic (LoRa) Signal Communication Device with Battery
Built for off-grid messaging and device-to-device data exchange, ThinkNode M2 is a compact LoRa communication device designed for use where internet or mobile coverage may be limited.It uses an ESP32-S3 module as the main processor, supports Bluetooth setup, and comes pre-installed with Meshtasti...
3.2 inch 320x820 RGB TTL TFT Display - No Touch
·
This rectangular TFT module is for projects that can drive a high-pixel-count RGB TTL display directly. It provides 320x820 pixels with RGB666 16-bit full-colour output on an IPS panel, so colours stay clear at wide viewing angles.It uses an ST7701S TFT driver. SPI is used only to configure the d...
Elecrow ThinkNode M9 - MeshCore Communication Terminal with Full QWERTY Keyboard, 2.4" LCD, GPS & 2300mAh Battery (915MHz)
·
The Elecrow ThinkNode M9 is an all-in-one LoRa communication terminal with a full QWERTY keyboard and a 2.4" colour LCD. Unlike most mesh nodes, it needs no phone: you type, read and navigate on the device itself. Pre-installed with MeshCore firmware, it joins the mesh as soon as you power it on....
3.2" 320x820 RGB TTL TFT Display with Capacitive Touch
·
This long rectangular TFT module is made for advanced display projects that need a striking, high-pixel-count screen. The 3.2" IPS panel provides 320x820 18-bit full-colour pixels, with colour that remains clear up to 80 degrees off-axis in any direction.The display uses an ST7701S driver with bo...
4.58-inch 320x960 RGB TTL TFT Display - No Touchscreen
·
This long rectangular TFT module is made for advanced display projects that need a wide bar-style screen with lots of pixels. The 4.58-inch IPS panel has a 320x960 resolution with 16-bit full-colour pixels, giving it a crisp, bright look for custom dashboards, status bars, instruments and other u...
3.7in 240x960 RGB TTL TFT Display - ST7701S
·
This long rectangular TFT module is made for advanced display projects that need a very wide bar-style screen with plenty of pixels. It has a 3.7" IPS panel with 240x960 18-bit full-colour pixels and good off-axis viewing up to 80 degrees in any direction.The display uses an ST7701S driver with S...
4in 720x720 Square RGB666 TTL TFT Display - No Touch
·
This square 4 inch TFT panel gives advanced display projects a high-resolution 720x720 pixel canvas with 16-bit full colour. It is an IPS display, so the colour remains strong up to 80 degrees off-axis in any direction.This version does not include a touchscreen. The panel uses an ST7701S TFT dri...
PD Stepper NEMA 17 USB-C PD Driver and Controller
·
Stepper motor builds often need a microcontroller, a separate driver, a 12V or 24V supply and plenty of wiring. This compact controller from Things by Josh brings that stack together in one unit designed to mount directly to the back of a standard NEMA 17 stepper motor.Power comes in via USB-C Po...
Adafruit QT Py ESP32-S2 WiFi Dev Board with uFL Antenna Port
·
The Adafruit QT Py ESP32-S2 with uFL Antenna Port is the extended-range version of the QT Py ESP32-S2. Instead of an on-board antenna, it features a uFL connector so you can attach any 2.4 GHz Wi-Fi antenna for significantly better range — ideal for projects where the board is enclosed in a metal...
Adafruit QT Py ESP32 Pico - WiFi Dev Board with STEMMA QT
·
The Adafruit QT Py ESP32 Pico brings the full power of the classic ESP32 into the tiny QT Py form factor. Built around the ESP32-PICO-V3-02 — an all-in-one module with dual-core 240 MHz Tensilica processor, Wi-Fi, Bluetooth Classic + BLE, 8 MB flash, and 2 MB PSRAM — this thumbnail-sized board is...
Adafruit ESP32-S3 TFT Feather - 4MB Flash, 2MB PSRAM, STEMMA QT
·
The Adafruit ESP32-S3 TFT Feather features a built-in 1.14" IPS colour TFT display (240×135 pixels, ST7789) on the front of the board. Combined with the dual-core ESP32-S3's native USB, Wi-Fi, Bluetooth LE, 4 MB flash, and 2 MB PSRAM, it provides a complete visual IoT platform in the Feather form...
Adafruit ESP32-S3 Reverse TFT Feather
The Adafruit ESP32-S3 Reverse TFT Feather places a 1.14" IPS colour TFT display (240×135 pixels, ST7789) on the back of the board, making it ideal for panel-mounted projects where the screen faces outward through an enclosure. Three user buttons (D0, D1, D2) alongside the display provide a comple...
Adafruit QT Py S3 with 2MB PSRAM WiFi Dev Board with STEMMA QT
The Adafruit QT Py ESP32-S3 with 2 MB PSRAM is the memory-upgraded version of the QT Py ESP32-S3. With 4 MB flash, 512 KB SRAM, and 2 MB PSRAM, it can handle large data buffers — perfect for image processing, large JSON parsing, or memory-intensive CircuitPython projects that the standard version...
ThinkNode G3-Single Channel LoRaWAN Gateway ESP32-S3 Chip
ThinkNode G3 is a high-performance, compact LoRaWAN gateway designed for IoT communications by Elecrow. It uses the ESP32-S3 dual-core processor and Semtech SX1262 transceiver, equipped with a 240MHz dual-core main control, integrated Bluetooth, WiFi and optional 4G modules(Not yet released), an...
Espressif Module Prog-1 ESP32 WROOM Programmer
·
The Espressif Module Prog-1 is a dedicated programmer for flashing ESP32 modules without soldering. It uses spring pins to make a secure, swappable connection to supported modules, making it handy for development, testing or small production runs.To use it, place a compatible ESP32 module onto th...
Adafruit ESP32-S2 Feather with BME280 Sensor - STEMMA QT
·
The Adafruit ESP32-S2 Feather with BME280 is identical to the standard ESP32-S2 Feather but with an on-board BME280 temperature, humidity, and barometric pressure sensor at I2C address 0x77. This makes it an instant IoT environmental monitor — just add Wi-Fi credentials and start logging. Built ...
