All Products
Showing 41-60 of 100 products
MicroMod Main Board - Double
·
This Double Main Board is a carrier for SparkFun’s MicroMod ecosystem, letting one MicroMod Processor Board connect to up to two MicroMod Function Boards. The M.2 MicroMod connectors make it straightforward to align the keyed edge connectors and secure the boards with screws.USB-C is provided for...
Gravity LED Switch Module - White
·
This compact illuminated push-button module combines a tactile switch with a built-in white LED indicator, making it handy for interactive electronics, prototypes and embedded control panels.The switch outputs a digital HIGH/LOW signal and runs from +3.3-5V, so it suits common development boards ...
20W Adjustable DC-DC Buck Converter with Digital Display
A 20W adjustable DC-DC buck converter module based on the LM2596 step-down regulator, featuring a built-in digital display that shows the output voltage in real time. Adjust the output from 1.25V to 37V using the onboard potentiometer — no multimeter needed. Wire terminals mean no soldering is re...
SparkFun Breadboard Power Supply Stick - 5V/3.3V
A simple breadboard power supply that takes a 6–12 V input and outputs a regulated 5 V or 3.3 V. All headers are at 0.1" pitch for direct insertion into a standard breadboard, with the output pins spaced to power both breadboard power rails simultaneously. Input power connects via the DC barrel ...
Mini Round Robot Chassis Kit - 2WD with DC Motors
·
This kit gives you everything you need to build the shell of a 2-wheel-drive Mobile Platform Robot! You get the metal plates that make up the chassis, two DC drive motors with matching wheels, and a caster ball for balance. You'll fill in the rest with a power supply, microcontroller board, an...
Adafruit Power Relay FeatherWing
·
The Adafruit Power Relay FeatherWing lets you switch high-power loads — lamps, fans, solenoids, small appliances, and more — directly from any Feather microcontroller board. With a switching capacity of up to 10A at 120 VAC or 5A at 240 VAC (resistive loads), it can handle up to 1,200 watts. The...
Lamp Switch - SPST (inline)
This inline switch is great when you just want a simple on/off toggle switch that’s already enclosed. Inside is a simple rocker switch with solder terminals with crimp strain relief. Attach some wires, solder them in place, and press-fit the enclosure together and you have a clean-looking switch....
3-AA Battery Holder, Enclosed with Switch
An enclosed battery holder for three AA cells with a built-in on/off switch. The snap-on lid slides over the batteries to fully enclose them, keeping the cells secure during use. Provides approximately 4.5 V with three alkaline AA batteries (3 × 1.5 V) or 3.6 V with three NiMH rechargeable cells...
Adafruit Mini Relay FeatherWing - Latching
·
The Adafruit Latching Mini Relay FeatherWing lets you control mains-powered devices and small appliances using any Feather microcontroller. Switch lamps, fans, solenoids, and other loads rated up to 250 VAC or DC — all from a compact FeatherWing form factor. This is the latching version, which u...
Gravity: IO Expansion Shield for Arduino V7.1
The DFRobot Gravity IO Expansion Shield V7.1 simplifies Arduino prototyping by breaking out all digital and analogue pins into colour-coded 3-pin (Signal, Voltage, Ground) Gravity connectors. Plug in sensors, actuators, and modules directly — no soldering or breadboard wiring required. Version 7...
Metal Pushbutton - Latching (16mm, White)
A heavy-duty, panel-mount latching pushbutton with an illuminated white LED ring. Built from stainless steel with IP65 weatherproofing, this 16mm threaded switch is designed to withstand tough environments while delivering reliable on/off control. This SPDT latching switch features 16mm threadin...
Missile Switch Cover - Red
It’s not what project you have in mind that may use a rocket launch switch… The question is what project will you come up with once you have one in hand? Everyone has a proverbial missile to launch.The hot red safety cover protects a toggle switch from accidentally being turned on. When flipped u...
Tactile Alternating Button w/3 Wire Leads
·
A push-button toggle switch with three wire leads. Each press alternates the connection — push once to connect the middle pin to one side, push again to switch it to the other. It functions as a simple, satisfying mechanical toggle without the bulk of a traditional switch. The pre-attached wire ...
Micro USB Power Cable with ON/OFF switch for Raspberry Pi
A Micro-USB power cable with an inline on/off switch, designed for the Raspberry Pi. Toggle power without unplugging the cable, reducing wear on the Pi's USB connector from frequent insertion and removal. Key Features Inline On/Off Switch – Power cycle your Pi without disconnecting the cable ...
2.1mm DC Power Jack with Rocker Switch
·
A 2.1 mm DC barrel jack with a built-in rocker switch, giving you a simple on/off control for devices that lack a dedicated power switch. It shares the same PCB footprint as a standard non-switched barrel jack, so it drops straight into existing designs without layout changes. Plug in your power...
2.1mm DC Power Jack with Slide Switch
·
A 2.1 mm DC barrel jack with a built-in slide switch, giving you simple on/off control for devices that lack a dedicated power switch. It shares the same PCB footprint as a standard non-switched barrel jack, so it drops straight into existing designs without layout changes. Plug in your power su...
Rocker Switch - On/Off/On (Round)
This little round on/off/on toggle switch is rated up to 10A at 125VAC and can be panel mounted in a 20mm diameter hole. It’ll also look pretty slick in your project!
16mm Illuminated Pushbutton - White Latching On/Off Switch
·
A 16mm illuminated pushbutton with a built-in white LED and latching on/off action. Press once to switch on, press again to switch off — ideal for power switches, mode selectors, and control panels. The LED is wired independently from the switch contacts, giving you full control over when the li...
16mm Illuminated Pushbutton - White Momentary
·
A 16mm illuminated pushbutton with a built-in white LED and momentary action. The switch contacts connect only while the button is held down and return to their normally-open state when released — perfect for trigger inputs, action buttons, and interactive controls. The LED is wired independentl...
16mm Illuminated Pushbutton - Blue Momentary
·
A 16mm illuminated pushbutton with a built-in blue LED and momentary action. The switch contacts connect only while the button is held down and return to their normally-open state when released — perfect for trigger inputs, action buttons, and interactive controls. The LED is wired independently...