All Products
Showing 41-60 of 100 products
Portable Handheld Linux Terminal With 3.5inch Touch Display
The Waveshare PocketTerm35 turns a Raspberry Pi 4B or Pi 5 into a proper handheld Linux computer. A 3.5inch 640 × 480 optically bonded touchscreen sits above a 67-key QWERTY silicone keyboard, so you get a complete Linux desktop — terminal, editor, browser, development tools — in something that f...
Pi STEMMA QT Breakout for Raspberry Pi
·
This compact breakout adds a 4-pin JST SH connector to a Raspberry Pi or compatible board, giving you a quick STEMMA QT/Qwiic connection for I2C sensors and devices. The 2x3 socket plugs onto the Pi’s I2C and power pins with no soldering required, so it is easy to fit and remove when you need it....
SparkPNT GNSS Flex Module - LG580P
·
Add precise positioning and orientation to a GNSS Flex carrier with this LG580P-based module. It is built for high-performance navigation, combining centimetre-level RTK positioning with real-time heading data for robotics, precision agriculture and autonomous vehicle projects.The module is part ...
SparkPNT GNSS Flex Module with mosaic-G5 P3
·
This GNSS Flex module brings Septentrio's compact mosaic-G5 P3 receiver to the SparkPNT Flex ecosystem, giving advanced navigation projects high-precision positioning in a small, low-power format.It is designed for autonomous systems, robotics and portable surveying tools where size, weight and p...
SparkPNT GNSS Flex Module - ZED-X20P
·
Build high-precision positioning into your GNSS Flex setup with this swappable ZED-X20P module. It uses the u-blox X20 engine, the successor to the F9 generation, for demanding navigation, control, robotics and vehicle applications.The module connects to a GNSS Flex pHAT carrier board via standar...
SparkPNT DAN-F10N GNSS Flex Module
·
Add modular GNSS positioning to a Raspberry Pi or similar single-board computer with this compact SparkPNT GNSS Flex receiver module. It is built around the u-blox DAN-F10N and is designed for reliable metre-level positioning, including challenging urban environments.The module fits the SparkPNT ...
GNSS Flex Module - mosaic-G5 P3 & IM19 IMU
·
This swappable GNSS Flex board pairs a Septentrio mosaic-G5 P3 GNSS receiver with a Feyman IM19 IMU for high-precision positioning, attitude measurement and dead reckoning in compact systems. It is suited to autonomous platforms, robotics and portable surveying tools where size, weight and power ...
SparkPNT GNSS Flex Module - mosaic-X5 & IM19 IMU
·
This GNSS Flex module combines a Septentrio mosaic-X5 multi-band RTK receiver with a Feyman IM19 IMU for high-precision positioning, tilt compensation and dead reckoning. It is aimed at professional surveying, industrial robotics and autonomous navigation applications where reliable position and ...
SparkPNT GNSS Flex Module - ZED-X20P & IM19 IMU
·
This GNSS Flex board combines a u-blox ZED-X20P all-band RTK GNSS receiver with a Feyman IM19 IMU, giving compatible carrier boards centimetre-level positioning plus compensated attitude data for demanding navigation and surveying projects.It is designed for the SparkPNT GNSS Flex ecosystem, with...
SparkPNT GNSS Flex Module - LG290P & IM19 IMU
·
This SparkPNT Flex board combines Quectel's LG290P quad-band RTK GNSS receiver with the Feyman (FMI) IM19 IMU, providing centimetre-level positioning with tilt compensation and anti-jamming performance for demanding navigation and surveying projects.It is part of the SparkPNT GNSS Flex system, de...
ATMEGA2560-16AUR AVR 8-bit Microcontroller
·
The ATMEGA2560-16AUR is a high-performance, low-power 8-bit microcontroller based on the Microchip AVR enhanced RISC architecture. It is the controller IC used at the heart of the Arduino Mega and many other advanced controller boards, making it a strong choice for complex embedded projects that ...
Raspberry Pi RP2040 Microcontroller IC
·
The RP2040 is Raspberry Pi’s debut microcontroller silicon, bringing the familiar Raspberry Pi focus on performance, low cost and ease of use into embedded designs.It combines a symmetric dual-core processor complex, large on-chip SRAM, deterministic bus fabric and a rich peripheral set. The uniq...
Qwiic 24-Bit 4-Channel ADC Breakout - ADS1219
·
When the ADC built into your microcontroller is not precise enough, this Qwiic breakout adds a high-resolution Texas Instruments ADS1219 for measuring very small analogue voltage changes.The board provides four channels of 24-bit analogue input, which can be used as four single-ended inputs or co...
Qwiic Alphanumeric Display - Blue
·
Show numbers, letters, characters and symbols in bright blue with this compact four-character alphanumeric display. Each digit uses fourteen segments, giving you far more flexibility than a standard seven-segment display.It connects through the SparkFun Qwiic system, so setup is simple: plug in a...
Adafruit 0.56in 4-Digit 7-Segment Display Backpack - Green
·
Add a bright numeric display to your project without giving up a pile of microcontroller pins. This assembled Adafruit LED backpack pairs an ultra-bright green 4-digit, 0.56 inch seven-segment display with a driver board that handles the multiplexing for you.The onboard driver chip includes its o...
Qwiic Soil Moisture Sensor
·
This compact breakout board measures moisture in soil and similar materials using two large exposed pads as conductivity probes. As the soil gets wetter, conductivity between the pads increases, resistance drops, and the sensor produces a higher analog SIG output.For quick setup, the board includ...
Qwiic Alphanumeric Display - White
·
This compact white alphanumeric display gives you fourteen-segment characters for showing numbers, letters and symbols in your project. It uses the VK16K33 LED driver over I2C, so it is a neat fit for Qwiic-based builds where you want readable text without lots of wiring.With Qwiic, you can plug ...
Qwiic Alphanumeric Display - Red
·
Add letters, numbers and symbols to your project with red fourteen-segment digits that are much more flexible than a basic seven-segment display. This Qwiic display connects over I2C, so you can plug it in without soldering, without working out SDA and SCL by hand, and without adding separate vol...
RFID Qwiic Kit with ID-12LA 125kHz Reader
·
This kit gives you the core hardware needed to start reading 125kHz RFID tags over I2C, without hunting for a separate reader module, antenna or wiring up a complex circuit. The box includes a SparkFun RFID Qwiic Reader, an ID-12LA RFID reader module, two 125kHz RFID cards and a 100mm Qwiic cable...
GNSS Flex pHAT with mosaic-G5 P3 & IM19 IMU
·
Add survey-grade GNSS and inertial navigation to a Raspberry Pi in a compact pHAT format. This kit combines the GNSS Flex pHAT with the SparkPNT mosaic-G5 P3 and IM19 IMU module, pairing Septentrio's compact GNSS receiver with a high-precision IMU for RTK positioning, attitude data and dead recko...
