All Products
Showing 7981-8000 of 8856 products · 2585 unavailable products hidden
STEMMA QT / Qwiic JST SH 4-Pin Cable - 200mm Long
·
This 4-wire cable is a little over 200mm / 7.8" long and fitted with JST-SH female 4-pin connectors on both ends. Compared with the chunkier JST-PH these are 1mm pitch instead of 2mm, but still have a nice latching feel, while being easy to insert and remove.This cable can be used with Qwiic or S...
STEMMA QT / Qwiic JST SH 4-Pin Cable - 300mm long
·
This 300 mm (11.8") 4-wire cable is fitted with JST-SH female 4-pin connectors on both ends. The 1 mm pitch JST-SH connectors are more compact than the chunkier 2 mm pitch JST-PH, while still providing a secure latching connection that is easy to insert and remove. Compatible with both STEMMA QT...
STEMMA QT / Qwiic JST SH 4-Pin Cable - 400mm long
·
This 4-wire cable is a little over 400mm / 15.7" long and fitted with JST-SH female 4-pin connectors on both ends. Compared with the chunkier JST-PH these are 1mm pitch instead of 2mm, but still have a nice latching feel, while being easy to insert and remove. This cable can be used with Qwiic bo...
STEMMA QT / Qwiic JST SH 4-pin Cable with Premium Female Sockets - 150mm Long
·
This 4-wire cable is a little over 150mm / 6" long and fitted with JST-SH female 4-pin connectors on one end and premium female headers on the other. Compared with the chunkier JST-PH these are 1mm pitch instead of 2mm, but still have a nice latching feel, while being easy to insert and remove.Th...
STEMMA Wired Tactile Push-Button Pack - 5 Color Pack
·
Little clicky switches are standard input "buttons" on electronic projects. These are just like our Colorful Round Tactile Button Switch Assortment, but already assembled onto a PCB - they even have a pull-up resistor installed! The pins are normally open (disconnected) and when the button is pre...
Stepper Motor - 125 oz.in (200 steps/rev, 600mm Wire)
This NEMA 23 bipolar stepper motor delivers 125 oz·in of holding torque with 200 steps per revolution (1.8° step angle). Equipped with extra-long 600 mm AWG22 wires, it's designed for CNC applications where longer cable runs are needed. Stepper motors provide precise position control without the...
Stepper Motor - 29 oz.in (200 steps/rev, Threaded Shaft)
These steppers have a threaded shaft, which allows them to be used as a linear actuator. As the motor runs, it moves along the shaft at a specific rate of 1cm per 5 full rotations. These are a good choice for linear motion where precision and repeatability are important. Note: It looks like the ...
Stepper Motor 42BYG
The 42BYG is a NEMA 17 bipolar stepper motor with a shaft-reversed design, commonly used in 3D printers, CNC machines, and DIY motion-control projects. With a 1.8° step angle and 40 N·cm holding torque, it provides reliable, precise positioning. The motor comes with a 70 cm 4-lead wire (AWG26 UL...
Stepper Motor - 68 oz.in (400 steps/rev)
This NEMA 17 bipolar stepper motor delivers 68 oz·in (48 N·cm) of holding torque with a fine 0.9° step angle, providing 400 steps per revolution for high-precision positioning. Its 5mm D-shaft and standard NEMA 17 mounting make it compatible with a wide range of CNC, 3D printing, and robotics app...
Stepper Motor: Bipolar, 200 Steps/Rev, 42x38mm, 2.8V, 1.7 A/Phase
A NEMA 17 hybrid bipolar stepper motor with a 1.8° step angle (200 steps per revolution). Each phase draws 1.7 A at 2.8 V, delivering a holding torque of 3.7 kg·cm. Four colour-coded wires with bare leads connect to two coils: black/green for one coil, red/blue for the other. Best driven with a ...
Stepper Motor Mount with Hardware - NEMA-17 Sized
·
You have a stepper motor, but you need to attach it to your CNC project, eh? Not so easy if you don't have a stepper motor mount just like this fine one here! This mount will fit any NEMA-17 motor (with 31mm hole spacing) with four screws. There are two 30mm long slots, 30mm apart so you can...
Stepper motor - NEMA-17 size - 200 steps/rev, 12V 350mA
·
A stepper motor to satisfy all your robotics needs! This 4-wire bipolar stepper has 1.8° per step for smooth motion and a nice holding torque. The motor was specified to have a max current of 350mA so that it could be driven easily with an Adafruit motor shield for Arduino (or other motor driv...
Stepper Motor with Cable
This is a simple, but very powerful stepper motor with a 4-wire cable attached. This is a Bipolar Motor. Features: Step Angle (degrees) :1.8 2 Phase Rated Voltage : 12V Rated Current : 0.33A Holding Torque : 2.3kg*cm 5mm Diameter Drive Shaft Winding resistance: 32.6 Ω Winding inductance: 48 ...
Step Switch with LED - Three Pack of Blue Plastic with Red LED
·
These hinged momentary step switches feature a satisfying clicky feel and a built-in red LED, reminiscent of the 16-step sequencer keys found on classic TR-808 synthesisers. The LED provides visual feedback when the switch is pressed, making them ideal for custom sequencers, control panels, and i...
Step Switch with LED - Three Pack of Gray Plastic with Red LED
·
These hinged momentary step switches are evocative of the 16-step sequencer keys on TR-808 sythesizers. Also sometimes used on A/V equipment, they're very tactile, with a good clicky feel. And of course, the built in red LED is great for indicating when something is on or off - or as visual ...
Step Switch with LED - Three Pack of Green with Red LED - PB86
·
These hinged momentary step switches are evocative of the 16-step sequencer keys on TR-808 sythesizers. Also sometimes used on A/V equipment, they're very tactile with a good clicky feel. And of course, the built in red LED is great for indicating when something is on or off - or as vis...
Step Switch with LED - Three Pack of Red Plastic with Red LED
·
These hinged momentary step switches are evocative of the 16-step sequencer keys on TR-808 sythesizers. Also sometimes used on A/V equipment, they're very tactile with a good clicky feel. And of course, the built in red LED is great for indicating when something is on or off - or as vis...
Step Switch with LED - Three Pack of White with Red LED - PB86
·
These hinged momentary step switches are reminiscent of the 16-step sequencer keys found on classic TR-808 synthesisers. Each white switch has a satisfying tactile click and a built-in red LED for status indication or visual feedback. Sold in a pack of three. The switch is a momentary SPDT type ...
Step Switch with LED - Three Pack of Yellow with Red LED
·
These hinged momentary step switches are evocative of the 16-step sequencer keys on TR-808 sythesizers. Also sometimes used on A/V equipment, they're very tactile with a good clicky feel. And of course, the built in red LED is great for indicating when something is on or off - or as vis...
Stereo 2.1W Class D Audio Amplifier - TPA2012
·
This incredibly small stereo amplifier is surprisingly powerful - able to deliver 2 x 2.1W channels into 4 ohm impedance speakers (@ 10% THD). Inside the miniature chip is a class D controller, able to run from 2.7V-5.5VDC. Since the amp is a class D, it's incredibly efficient (89% efficient when...
