All Products
Showing 7561-7580 of 8848 products · 2592 unavailable products hidden
SparkFun IoT Starter Kit with Blynk Board
The SparkFun IoT Starter Kit with Blynk Board provides a beginner-friendly introduction to the Internet of Things without any programming or soldering required. The Blynk Board comes pre-loaded with projects and connects to the Blynk mobile app, allowing you to control LEDs, monitor sensors, and ...
SparkFun IR Thermometer Evaluation Board - MLX90614
An evaluation board for the MLX90614 non-contact infrared thermometer sensor. It pairs the MLX90614 with an ATmega328 running at 3.3 V (8 MHz Arduino bootloader), giving you a ready-to-use IR temperature sensor with serial output. The board comes pre-loaded with demo code that outputs temperatur...
SparkFun ISP Pogo Adapter v2
·
Pogo pins make life so much easier when you are trying to program without having to solder a single thing, and when you attach them to an In-system programming (ISP) adapter, they become instantly better. This simple kit allows you to do just that. The ISP Pogo Adapter is a simple and easy way to...
SparkFun Large Digit Driver
The SparkFun Large Digit Driver is a chainable controller board that solders directly to the back of 6.5" 7-segment LED displays. It uses the TPIC6C596 shift register IC to drive individual segments, making it easy to build multi-digit scoreboards, lap timers, and large-format numerical displays ...
SparkFun LED Driver Breakout - LP55231
The SparkFun LP55231 LED Driver Breakout is a self-contained solution for developing and deploying the nine-channel I2C LED controller. Remarkably simple, the breakout is equipped primarily with just the LP55231 LED controller IC, plus three RGB LEDs. It also features pads and jumpers for replaci...
SparkFun LED Driver Breakout - TLC5940 (16 Channel)
The TLC5940 is a 16 channel PWM unit with 12 bit duty cycle control (0-4095), 6 bit current limit control (0-63), and a daisy chainable serial interface. This breakout board is a good way to take full advantage of this useful IC. All 16 PWM channels are broken out to standard 0.1" headers, which ...
SparkFun LED RingCoder Breakout - RGB
The SparkFun LED RingCoder Breakout provides a visual position indicator for rotary encoders. Two 8-bit shift registers drive a circular LED bargraph that displays the virtual position of the encoder as it turns, giving clear feedback on where you are within a range of values. This RGB revision ...
SparkFun Level Shifter - 8 Channel (TXS01018E)
The SparkFun 8 Channel Level Shifter Breakout features the TXS01018E™ 8-bit, bi-directional logic level translator from Texas Instruments. This board allows you to easily shift logic between devices running at different common microcontroller voltages such as 1.8V, 3.3V and 5V. The TXS0108E ca...
SparkFun Level Shifting microSD Breakout
The SparkFun Level Shifting microSD Breakout is quite similar to the SparkFun microSD Transflash Breakout, but with the included level shifting hardware, this board allows you to utilize a microSD card at Arduino’s SD library’s top speed on a 5V system. With this small breakout board, that is not...
SparkFun Level Translator Breakout - PCA9306
The SparkFun PCA9306 Level Translator Breakout provides dual bidirectional voltage-level translation for I2C and SMBus lines. It lets you safely connect devices operating at different logic levels — for example, a 3.3V sensor to a 5V microcontroller — without a direction pin. Simply apply your re...
SparkFun Lightning Detector - AS3935
The SparkFun Lightning Detector adds lightning detection to your next weather station to make sure you are aware of any potential hazardous weather heading your way. The AS3935 is capable of detecting lightning up to 40km away with an accuracy of 1km to the storm front with a sensitive antenna tu...
SparkFun Linear 3D Hall-Effect Sensor - TMAG5273 (Qwiic)
·
The SparkFun TMAG5273 Linear 3D Hall-Effect Sensor is a low-power, high-precision magnetic field sensor that detects the presence, strength, and direction of magnetic fields in three dimensions. Built on a standard 25.4 × 25.4 mm (1 × 1 in) Qwiic breakout, it communicates over I²C with no solderi...
SparkFun Line Follower Array
The SparkFun Line Follower Array is a long board consisting of eight IR sensors that have been configured to read as digital bits! We have designed the SparkFun Line Follower Arrays to follow a dark line of about ¾ inch width or smaller (spray paint or electrical tape) on a light background. Each...
SparkFun Line Sensor Breakout - QRE1113 (Analog)
This version of the QRE1113 breakout board features an easy-to-use analog output, which will vary depending on the amount of IR light reflected back to the sensor. This tiny board is perfect for line sensing applications and can be used in both 3.3V and 5V systems. The board’s QRE1113 IR refle...
SparkFun Line Sensor Breakout - QRE1113 (Digital)
The SparkFun QRE1113 Line Sensor Breakout (Digital) is a compact IR reflectance sensor board that outputs a digital signal based on surface reflectivity. It uses a capacitor discharge circuit — the faster the 10 nF capacitor discharges, the more reflective the surface. This makes it straightforwa...
SparkFun LiPo Charger Basic - Micro-USB
If you need to charge LiPo batteries, this simple charger will do just that, and do it fast! The SparkFun LiPo Charger Basic is stripped down of all features and just does one thing well - charge 3.7V LiPo cells at a rate of 500mA. It is designed to charge single-cell Li-Ion or Li-Polymer ba...
SparkFun LiPo Charger Basic - Mini-USB
A simple single-cell LiPo/Li-Ion battery charger based on the MCP73831T charge controller IC. Connect a battery via the JST connector, plug in a Mini-USB cable for power, and the board handles charging automatically with a status LED to indicate progress. Key Features MCP73831T Charge Controll...
SparkFun LiPo Charger/Booster - 5V/1A
The SparkFun LiPo Charger/Booster is a compact board that charges a single-cell lithium polymer battery and boosts its output to a regulated 5V at up to 1A. Built around the MCP73831 charge controller and PAM2401 boost converter, it's an economical solution for powering 5V projects from a LiPo ce...
SparkFun LiPo Charger Plus
The SparkFun LiPo Charger Plus is the souped-up power option in the SparkFun line of single-cell lithium polymer (LiPo) battery chargers. With this iteration, we've changed the input charge connector to USB-C and provided charge rate selection as well as optional thermal protection. Charge, power...
SparkFun Load Cell Amplifier - HX711
The SparkFun Load Cell Amplifier is a small breakout board for the HX711 IC that allows you to easily read load cells to measure weight. By connecting the amplifier to your microcontroller you will be able to read the changes in the resistance of the load cell, and with some calibration you’ll be...
