All Products
Showing 1-20 of 54 products · 6 unavailable products hidden
SparkFun Qwiic Shield for Teensy
The SparkFun Qwiic Shield for Teensy adds four Qwiic (I2C) connectors to your Teensy board, providing quick access to the SparkFun Qwiic ecosystem of sensors, actuators, and displays. Sized to fit the Teensy 4.0, Teensy 3.2, and Teensy LC footprints. The shield connects GND, 3.3V, SDA, and SCL f...
SparkFun Qwiic Shield for Teensy - Extended
An extended Qwiic shield that adds four Qwiic connectors to Teensy 4.1, Teensy 3.6, and Teensy 3.5 boards. Connects the I²C bus (GND, 3.3 V, SDA, SCL) to two horizontal and two vertical Qwiic ports for easy daisy-chaining of I²C sensors and actuators. Includes a PROG button that mirrors the Teen...
Teensy to Arduino R3 Shield Adapter
·
This passive adapter lets a Teensy development board connect to the standard Arduino 1.0 (R3) shield footprint, making it easier to reuse existing Arduino shields without a breadboard full of jumper wires.Solder your Teensy board, sold separately, to the marked footprint on the adapter, then plug...
SparkFun Qwiic Adapter
The SparkFun Qwiic Adapter provides the perfect means to make any old I2C board into a Qwiic-enabled board. This adapter breaks out the I2C pins from the Qwiic connectors to pins that you can easily solder with your favorite I2C-enabled device. The Qwiic Adapter has two Qwiic connection ports...
SparkFun Qwiic Shield for Thing Plus
The SparkFun Qwiic Shield for Thing Plus adds four Qwiic connectors (two horizontal, two vertical) to any Thing Plus or Adafruit Feather-format development board. It breaks out the I²C bus (GND, 3.3 V, SDA, SCL) to standard 1 mm pitch JST connectors for solderless daisy-chaining of Qwiic-compatib...
RedBoard Plus Arduino-Compatible Development Board
·
This Arduino-compatible development board keeps the familiar Uno-style layout while adding a few genuinely handy upgrades for modern projects. Built around the ATmega328P, it works with the Arduino IDE and fits the Uno R3 footprint, so it is a straightforward choice if you want broad compatibilit...
Adafruit SEN54 or SEN55 Adapter Breakout - STEMMA QT / Qwiic
·
The Adafruit SEN54/SEN55 Adapter Breakout lets you quickly connect a Sensirion SEN5x environmental sensor node to any microcontroller or single-board computer via STEMMA QT / Qwiic — no soldering or breadboarding required. The adapter handles the SEN5x's special cable connection and 5 V power req...
Adafruit SEN6x Breakout for Sensirion SEN66 - STEMMA QT / Qwiic
·
The Adafruit SEN6x Breakout lets you quickly connect a Sensirion SEN66 (or other SEN6x) environmental sensor node to any microcontroller or single-board computer via STEMMA QT / Qwiic — no soldering or breadboarding required. The adapter handles the SEN6x's special cable connection and power requ...
OctoWS2811 Adapter for Teensy 3.x & 4.x
·
Build large LED displays with a Teensy using this OctoWS2811 adapter board. It connects Teensy 3.2 through 4.1 boards to thousands of WS2811, WS2812 or NeoPixel-compatible LEDs, with support for driving up to eight strips in parallel via the high-speed OctoWS2811 Library.The adapter acts as an ac...
SparkFun Qwiic Shield for Arduino
The SparkFun Qwiic Shield is an easy-to-assemble board that provides a simple way to incorporate the Qwiic Connect System with your Arduino-based device. This shield connects the I2C bus on your Arduino to a series of SparkFun Qwiic connectors and provides the circuitry to convert the 5V giv...
SparkFun Qwiic WiFi Shield - DA16200
Ultra. Low. Power. Arguably the best three words in the IoT world. SparkFun has teamed up with ARM and Dialog to provide you with this Qwiic WiFi Shield based around the DA16200 module. The DA16200 is a fully integrated WiFi module with a 40MHz crystal oscillator, 32.768KHz RTC clock, RF Lumped R...
MY1690X-16S Serial MP3 Player Shield for Arduino
·
Add stand-alone audio playback to an Arduino project with this serial MP3 player shield based on the MY1690X decoder IC. It can play MP3 and WAV files from a standard microSD card, making it handy for music, voice prompts and sound effects.The shield is controlled over a serial UART command set a...
Raspberry Pi 4 Desktop Kit - Without Raspberry Pi
·
Got a Raspberry Pi 4 ready to go? This bring-your-own-Pi kit bundles the accessories needed to turn an HDMI monitor into a Raspberry Pi desktop PC or media centre, without including the Raspberry Pi board itself.The kit includes a blank 64GB microSD card with adapter, selected for smooth Raspberr...
SparkFun Qwiic Shield for Arduino Nano
The SparkFun Qwiic Shield for Arduino Nano provides you with a quick and easy way to enter into SparkFun's Qwiic ecosystem with your Arduino Nano board. The Qwiic shield connects the I2C bus (GND, 3.3V, SDA and SCL) on your Arduino Nano to four SparkFun Qwiic connectors (two horizontally and two ...
Arduino Nano Stackable Header Kit
These stackable headers are made to work with the SparkFun Qwiic Shield for Arduino Nano or any comparable shield to connect the shield with a Arduino Nano footprint. This set includes two 15-pin headers; the pins are spaced by 0.1". Each set of headers allows you to stack a Qwiic Nano shield ...
Flexible Qwiic Cable - Female Jumper (4-pin)
This is a jumper adapter cable that comes pre-terminated with a female Qwiic JST connector on one end and female connectors on the other. The cable insulation is made from silicon making it more flexible than our original Qwiic cable particularly in tight spaces or enclosures. This cabl...
SparkFun BlackBoard
The SparkFun BlackBoard is an Arduino Uno-compatible development board with a range of improvements over the standard Uno. It features the CH340G USB-to-serial converter for broad driver compatibility, a reinforced through-hole micro-B USB connector, an upgraded 600 mA 3.3V regulator with thermal...
USB Host Cable for Teensy 4.1 and 3.6
·
This adapter cable lets a Teensy 4.1 or Teensy 3.6 use its USB host capability by converting the dedicated 5-pin USB host header connection into a standard female USB Type-A port.Once fitted, your Teensy can act as a USB host for peripherals such as keyboards, mice, MIDI controllers and USB hubs,...
Ethernet Adapter for Teensy 4.1
·
This adapter makes it straightforward to add a wired Ethernet connection to a Teensy 4.1. It brings the functionality of the Ethernet Kit for Teensy 4.1 onto a single board, helping you get a network-capable setup together with less assembly.The tricky parts are already taken care of, with the RJ...
3.2 inch 320x240 Colour TFT Touchscreen - ILI9341
·
Add a colour touchscreen to your Teensy project with this 3.2 inch TFT display. It provides 320x240 resolution for higher-resolution graphics and uses the ILI9341 display controller.The supplier recommends this display for use with Teensy 3.2 through to Teensy 4.1. It suits projects that need a c...
