All Products
Showing 1-20 of 51 products · 9 unavailable products hidden
Stacking Header Kit for ItsyBitsy or Teensy
·
These three Stacking Headers alone are, well, lonely. But pair them with our ItsyBitsy boards, and you're in business! Great for putting something a-top your ItsyBitsy, like this AirLift bitsy add-on. Also works great for 'short' Teensy boards - not Teensy 3.5 or 3.6 long s...
Teensy Stackable Header Kit (Extended)
These headers are made to work with the Teensy 4.1, Teensy 3.6, and Teensy 3.5 development boards. Each set of headers allows for your Teensy to be easily incorporated into a breadboard circuit or attach a shield on top of the board. This kit includes three headers (two 24-pin, and one 5-pin), en...
USB Host Cable for Teensy 4.1 and 3.6
·
This adapter cable lets a Teensy 4.1 or Teensy 3.6 use its USB host capability by converting the dedicated 5-pin USB host header connection into a standard female USB Type-A port.Once fitted, your Teensy can act as a USB host for peripherals such as keyboards, mice, MIDI controllers and USB hubs,...
SparkFun Qwiic Shield for Teensy - Extended
An extended Qwiic shield that adds four Qwiic connectors to Teensy 4.1, Teensy 3.6, and Teensy 3.5 boards. Connects the I²C bus (GND, 3.3 V, SDA, SCL) to two horizontal and two vertical Qwiic ports for easy daisy-chaining of I²C sensors and actuators. Includes a PROG button that mirrors the Teen...
Straight Male Header - Gold Plated, PTH, 0.1in, 24-Pin
·
This is a single-row strip of straight male breakaway header pins, useful for adding standard through-hole connections to development boards and maker projects.The header uses standard 0.1" (2.54mm) spacing and comes in a 24x1 format. This size is normally used with Teensy 3.5, Teensy 3.6 or Teen...
Teensy Audio Adaptor Board
NOT COMPATIBLE WITH THE TEENSY 4. For compatible version, see Teensy Audio Adaptor Board (Revision D)This is the Teensy Audio Adapter Board that can be added to a Teensy 3.0, 3.1, 3.2, 3.5 or 3.6 for your next audio project. The shield provides you with an easy-to-use tool to add high qualit...
Teensy to Arduino R3 Shield Adapter
·
This passive adapter lets a Teensy development board connect to the standard Arduino 1.0 (R3) shield footprint, making it easier to reuse existing Arduino shields without a breadboard full of jumper wires.Solder your Teensy board, sold separately, to the marked footprint on the adapter, then plug...
Teensy 3.x Feather Adapter
·
The Teensy 3.x Feather Adapter rearranges the pins of a Teensy 3.x board to match the Adafruit Feather form factor and pinout. This allows the Teensy to work with the full range of FeatherWing add-ons — motor drivers, GPS modules, LED matrices, OLEDs, and more. The adapter also includes a built-...
SmartMatrix SD Shield v3 - for Teensy 3.2
·
The SmartLED Shield (V4) provides a simple, solder-free way to connect a Teensy 3.2, Teensy 3.5, or Teensy 3.6 to HUB75 RGB LED Matrix Panels. Just plug in your Teensy, connect your panel, and start displaying graphics, patterns, or animated GIFs using the SmartMatrix Library. The shield include...
Audio Adapter Board for Teensy 3.0 - 3.2, 3.5 and 3.6
·
This audio adapter lets you easily add high quality 16 bit, 44.1 kHz sample rate (CD quality) audio to your projects with a Teensy 3.2, 3.5 or 3.6. It supports stereo headphone and stereo line-level output, and also stereo line-level input or mono microphone input.The audio chip connects to Te...
SparkFun Qwiic Shield for Teensy
The SparkFun Qwiic Shield for Teensy adds four Qwiic (I2C) connectors to your Teensy board, providing quick access to the SparkFun Qwiic ecosystem of sensors, actuators, and displays. Sized to fit the Teensy 4.0, Teensy 3.2, and Teensy LC footprints. The shield connects GND, 3.3V, SDA, and SCL f...
Teensy 4.1 Lockable Without Ethernet
·
This lockable Teensy 4.1 variant combines the high-performance Teensy 4.1 platform with production-focused code security, while omitting the Ethernet PHY for projects that do not need wired networking. It is built around the NXP MIMXRT1062DVJ6B ARM Cortex-M7 processor running at 600 MHz, with 8 M...
Teensy Header Kit
These headers are made to work with the Teensy 3.2 and Teensy LC development boards. Each kit of headers makes your Teensy breadboard compatible and will allow for stacking a Teensy and Teensy-compatible shield board. This kit includes five headers (two 13-pin, one 7-pin, one 3-pin, and one 2x...
Teensy 4.1 Lockable Microcontroller Board
·
This lockable Teensy 4.1 is aimed at advanced developers moving from prototype to a secure production design. It keeps the high-performance 600 MHz ARM Cortex-M7 platform of the Teensy 4.1 while adding write access to the chip’s eFuses so your final application can be encrypted and locked to the ...
Teensy Audio Tutorial Extra Parts Kit
·
This kit gathers the small supporting parts needed to complete projects from the official Teensy Audio Tutorial. It is intended for makers who already have a Teensy board and the main audio adapter, but still need the specific buttons, potentiometers and connectors used in the tutorial builds.Ins...
Teensy Audio Adapter Board (Rev D)
This is the Teensy Audio Adapter Board that can be added to a Teensy 4.0 for your next audio project. The shield provides you with an easy-to-use tool to add high quality 16 bit, 44.1 kHz sample rate audio to your Teensy. With the audio library you will be able to use both the input and outp...
SparkFun DataLogger IoT - 9DoF
The SparkFun DataLogger IoT - 9DoF is a preprogrammed data logger that automatically detects, configures, and logs Qwiic-compatible sensors — all without writing a single line of code. Simply plug in your sensors, power up, and start capturing data to a microSD card or send it wirelessly to your ...
Panel Mount USB Cable - B Female to Mini-B Male
·
A panel-mount USB extension cable with a USB-B female jack on one end and a Mini-B male plug on the other. The jack features two mounting ears with pre-installed M3 screws, making it easy to add an external USB port to project enclosures for devices with Mini-B USB connections. Key Features Pa...
3.2 inch 320x240 Colour TFT Touchscreen - ILI9341
·
Add a colour touchscreen to your Teensy project with this 3.2 inch TFT display. It provides 320x240 resolution for higher-resolution graphics and uses the ILI9341 display controller.The supplier recommends this display for use with Teensy 3.2 through to Teensy 4.1. It suits projects that need a c...
Teensyduino Tutorial Kit
·
Get started with Teensy development using a kit built around the official PJRC Teensyduino Tutorials, parts 1 through 4. It gathers the fundamental electronic components needed for the early lessons, so you can focus on building and learning.The kit is intended as a companion for your Teensy boar...
