All Products

SKU: DF-DFR0151

The DS1307 Real Time Clock module developed by one of our designers: Waiman. The module comes fully assembled and pre-programmed with the current time (ok, so it's our current time - MST). The included Lithium coin cell battery (CR1225 41mAh) will run the module for a minimum of 9 years (17 ...

SKU: SF-BOB-12708

This is the SparkFun Real Time Clock (RTC) Module, this little breakout that uses the DS1307 to keep track of the current year, month, day as well as the current time. The module comes fully assembled and includes a small CR1225 Lithium coin cell battery that will run the RTC for a minimum of 9 y...

SKU: AF-255 · MPN: 255

THIS IS THE LATEST VERSION 2.1The ChronoDot RTC is an extremely accurate real time clock module, based on the DS3231 temperature compensated RTC (TCXO). It includes a CR1632 battery, which should last at least 8 years if the I2C interface is only used while the device has 5V power available. No e...

SKU: SF-COM-30227 · MPN: COM-30227

The RV-1805-C3 is an ultra-low-power real-time clock module built for efficient, reliable timekeeping in battery-powered electronics. It integrates the crystal (XTAL) directly into a hermetically sealed ceramic package, removing the need for external clock tuning.With a maximum timekeeping curren...

SKU: SF-BOB-14558

Get with the times, already! This SparkFun Real Time Clock (RTC) Module is a Qwiic-enabled breakout board for the RV-1805 chipset. The RTC is ultra-low power (running at only about 22nA in its lowest power setting) so it can use a supercapacitor for backup power instead of a normal battery. ...

SKU: SF-BOB-16281

The SparkFun RV-8803 Real Time Clock Module is a Qwiic-enabled breakout for the RV-8803 RTC, featuring a factory-calibrated temperature-compensated crystal for extremely precise timekeeping. It tracks hundredths of seconds, seconds, minutes, hours, date, month, year, and weekday, with multiple al...

SKU: LB-LS0822

This programming kit is a broad starter set for experimenting with a micro:bit board v1, sensor modules, displays, outputs and simple input devices.It includes the micro:bit board, an extension board, USB cable, acrylic plastic piece, 400 point breadboard, wiring, storage box and a large collecti...

SKU: EF-EF08297

The Classroom Smart Home Kit includes components such as an IOT:bit expansion board, crash sensor, 180-degree servo, rainbow LED, noise sensor, light sensor, and OLED display. These components enable a wealth of functionality and work perfectly with the micro:bit board, allowing you to explore mo...

SKU: EF-EF08298

The ELECFREAKS Classroom Smart Air Purifier Kit includes components such as the IOT: bit expansion board, motor fan, and dust sensor. These components can achieve rich functions and perfectly match with the micro: bit development board, allowing you to explore more interesting smart homemaker ...

SKU: EF-EF08299

ELECFREAKS Classroom Smart Pet Feeder Kit uses a micro:bit v2, an IOT:bit expansion board, a PIR sensor from the Octopus series as well as a Sonar:bit, a 180° 9g servo, and a cute little wooden house as components. The working principle of the smart pet feeder is as follows: firstly, the PIR sens...

SKU: WS-31284 · MPN: 31282

Built around the ESP32-S3 dual-core processor, this industrial relay module brings local control, networking and edge automation into one DIN-rail friendly unit. It combines 8 relay outputs, 8 digital inputs, isolated CAN, Ethernet, Wi-Fi and Bluetooth for control panels, robotics, smart factorie...

SKU: SF-GPS-30975 · MPN: GPS-30975

Built around the u-blox ZED-F9T-20B receiver, this breakout is made for projects where precise time matters as much as location. Under clear skies it can provide five nanoseconds of timing accuracy without requiring external GNSS correction data, making it suitable for 5G IoT networks, distribute...

SKU: SF-GPS-30018 · MPN: GPS-30018

Built around the u-blox SAM-M8Q module, this compact GNSS receiver is a straightforward way to add location tracking to a project. Plug in USB-C for power and configuration, or use the Qwiic connectors for solder-free I2C integration with compatible boards.The board includes an integrated smart a...

SKU: SF-BOB-10160

Here is a real time clock based on the DS3234 Real Time Clock IC. The DS3234 is a low-cost, extremely accurate SPI bus real-time clock with an integrated temperature-compensated crystal oscillator and crystal. The RTC maintains seconds, minutes, hours, day, date, month, and year information....

SKU: EC-ARS04053S

The SIM5360E series is Dual-Band HSPA+/WCDMA and Quad-Band GSM/GPRS/EDGE module solution in a SMT type which supports HSPA+ up to 14.4Mbps for downlink data transfer.supports 3G network and combines GPS technology for satellite navigation. Besides, it also supports A-GPS that available for indoor...

SKU: PH-106008

The HighPi Pro 5S Case for Raspberry Pi 5 continues the HighPi case line, offering ease of use, flexible configuration, and attractive design. It embraces the upgrades found on the Pi 5 board, namely its active cooler, power button, and PCIe port. Lots of space is available for HATs, such as powe...

SKU: SF-COM-10079

RTC stands for real time clock folks. The DS3234 is a low-cost, extremely accurate SPI bus RTC with an integrated temperature compensated crystal oscillator (TCXO) and crystal.

SKU: SF-SEN-24540 · MPN: SEN-24540

Forget ultrasonic and infrared sensors; the SparkFun Qwiic Pulsed Coherent Radar Sensor - Acconeer XM125 brings powerful 60 GHz radar technology to your projects. This sensor isn't limited to surface detection; it can see through walls, cabinets, and even pockets (depending on the material), ma...