All Products

SKU: AF-3055

Did you really think the Raspberry Pi would stop getting better? At this point, we sound like a broken record, extolling on the new Pi’s myriad improvements like we’re surprised that the folks at the Raspberry Pi Foundation are continuously making their flagship board better.  Still, w...

SKU: DF-FIT0817 · MPN: FIT0817

Keep your Raspberry Pi running cooler with this compact aluminium heatsink and fan kit for Raspberry Pi 3B, 3B+ and 4B boards. The main heatsink uses a slotted surface to help dissipate heat from the CPU.Two 7 mm 9-blade cooling fans are mounted on the large aluminium heatsink for active cooling....

SKU: RP-SC0130 · MPN: SC0130

The Raspberry Pi 3 Model A+ is a compact single-board computer featuring a 64-bit quad-core 1.4GHz Broadcom BCM2837B0 processor, dual-band wireless LAN (2.4GHz and 5GHz), and Bluetooth 4.2/BLE. It shares the same smaller mechanical footprint as the original Pi 1 Model A+, making it ideal for embe...

SKU: AF-3083

A compact aluminium heatsink with pre-applied thermal adhesive for easy installation on the Raspberry Pi 3 and other single board computers. Simply peel off the protective film and press firmly onto the processor — no additional thermal paste or clips required. In testing, a Raspberry Pi 3 witho...

SKU: AF-2029

The Raspberry Pi B+/Pi 2/ Pi 3 has landed on the Maker World like a 40-GPIO pinned, quad-USB ported, credit card sized bomb of DIY joy. And while you can use most of our great Model B accessories by hooking up our downgrade cable, its probably a good time to upgrade your set up and accessorize...

SKU: AF-3114

Have you always wanted to binge-watch Battlestar Galactica on a single-board computer? We have! And that's why we put together this Raspberry Pi Media Center kit for Raspberry Pi Model 3's! Based around the OSMC media center, this kit includes everything you need to get going on building ...

SKU: RP-SC0889 · MPN: SC0889

The Raspberry Pi Debug Probe is a USB-to-debug adapter designed for solderless, plug-and-play debugging and programming of Raspberry Pi Pico and RP2040-based boards. It provides both a serial wire debug (SWD) interface and a UART interface, each using the Raspberry Pi 3-pin debug connector. Base...

SKU: PI-COM0004

This extra-tall 2×20 female header is designed to connect custom PCBs and HATs to the Raspberry Pi GPIO pins. At 16.5 mm tall, it provides enough clearance for your board to sit above the Ethernet and USB jacks without interference. The header has 3 mm pin length on the underside, so there's no ...

SKU: LB-RPI3-GPIO-REFERENCE

The Raspberry Pi 3 GPIO Reference Card made by Little Bird (Australia) makes it quick and easy to understand what pins do what on your RPI3. Although it's called the" Raspberry Pi 3 GPIO reference" is also works with the Raspberry Pi Zero / Pi 2 / Pi 3!

SKU: WS-30915 · MPN: 30915

Enhance your Raspberry Pi Compute Module 5's capabilities with our cutting-edge Mini Dual Gigabit Ethernet Base Board/Mini-Computer Kit – the perfect companion for all variants of CM5, enabling a wide array of networking and industrial applications.Please Note: Raspberry Pi Compute Module 5 is NO...

SKU: DF-DRI0054 · MPN: DRI0054

##Introduction The multifunctional motor driver expansion board is designed for Raspberry Pi Zero/Zero W/A+/B+/2B/3B/3B+/4B. This fully-featured robot motor expansion board is capable of supporting multiple motors, stepper motors, and servos simultaneously. It also provides spare camera and DIP d...

SKU: AF-3847

A compact Power over Ethernet (PoE) module that extracts power from the Ethernet cable's centre taps and outputs a regulated 5 V at up to 1.5 A. Connect the four input wires to the PoE pins on your Ethernet-capable board and get clean DC power on the other side — no separate power cable needed. ...

SKU: AF-1993

This 2×20 (40-pin) IDC box header is the matching connector for 40-pin GPIO ribbon cables used with Raspberry Pi models that have a 40-pin GPIO header. Solder it onto perfboard to create a breakout point for your Pi's GPIO, or use it in any custom PCB design. Key Features 40-Pin (2×20) – Match...

SKU: DF-FIT0417

A premium CNC-machined aluminium case for the Raspberry Pi B+, 2 Model B, and 3 Model B. Features anodic oxidation processing for a durable, professional finish with high-precision dimensions for a perfect fit. The grooved bottom design provides easy access for GPIO ribbon cables. Key Features ...

SKU: AF-3848

An isolated Power over Ethernet (PoE) module that extracts power from the Ethernet cable's centre taps and outputs a regulated 5 V at up to 1.8 A. The built-in isolation transformer ensures there is no direct electrical connection between the Ethernet side and the 5 V output — important for safet...

SKU: AF-3082

A tall-profile aluminium heatsink with pre-applied thermal adhesive for easy installation on the Raspberry Pi 3 and other single board computers. The taller 15mm height provides greater surface area for improved heat dissipation compared to shorter heatsinks. Simply peel off the protective film a...

SKU: AF-2257

Now that we have The Single Greatest Raspberry Pi Model B+ / Pi 2 / Pi 3 Case Ever - we decided to make it even better by adding COLORS!!!!!  Mix and match snap-on lids and bases to form your favorite combinations.  Buy one base then match different colored lids t...

SKU: WS-19888

The Waveshare Pico-LCD-2 is a 2-inch IPS LCD display module designed to plug directly onto a Raspberry Pi Pico via its onboard female pin header. With 320×240 resolution and 65K RGB colours, it delivers clear, vibrant visuals for your Pico projects. The module uses an SPI interface requiring min...

SKU: WS-25567

The UPS HAT (D) is a powerful uninterruptible power supply designed for Raspberry Pi, offering seamless charging and power output with dynamic path management. This HAT provides stable 5V output, ensuring uninterrupted operation for your Pi projects. It supports 21700 Li-ion batteries (not includ...

SKU: PI-CAM007

This camera cable adapter converts the smaller Raspberry Pi Zero camera ribbon cable to the standard full-size CSI connector used on Raspberry Pi models A, B, 2, 3, and 4. Connect the narrow end to your Pi Zero camera module and the wider end to the CSI port on a full-size Pi. Specifications C...