All Products

SKU: SF-CAB-28768 · MPN: CAB-28768

With the SparkFun Qwiic Connect System expanding every day, we want to make sure it becomes as accessible as possible but we understand there are other systems that can compliment it out there. The Qwiic to Gravity Adapter Cable allows interoperability between the SparkFun Qwiic Connect Syste...

SKU: SF-PRT-17258

This is a 200mm long 4-conductor cable with 1mm JST termination. It’s designed to connect Qwiic enabled components together but can be used for other applications as well. The cable insulation is made from silicon making it more flexible than our original Qwiic cable particularly in tig...

SKU: AF-4424

A 200mm adapter cable with a JST-SH 4-pin connector (STEMMA QT / Qwiic, 1mm pitch) on one end and a JST-PH 4-pin connector (STEMMA / Grove, 2mm pitch) on the other. Use it to bridge I2C sensors and drivers between the two connector ecosystems. Both connectors have a latching feel for secure conn...

SKU: AF-6036 · MPN: ADA6036

A 22-pin flexible flat cable (FPC) with 0.5mm pitch, 20cm in length. This A-B style cable has matching pin orientation on both ends — pin 1 on one side aligns with pin 1 on the other — making connections straightforward. Designed to work with Raspberry Pi 5 DSI/CSI connectors and RP2350 boards w...

SKU: AF-4401

This 4-wire cable is a little over 200mm / 7.8" long and fitted with JST-SH female 4-pin connectors on both ends. Compared with the chunkier JST-PH these are 1mm pitch instead of 2mm, but still have a nice latching feel, while being easy to insert and remove.This cable can be used with Qwiic or S...

SKU: AF-2571

This 50-pin FPC extension board lets you add approximately 22cm of reach to any 50-pin, 0.5mm pitch FPC/FFC connection. The board features two 50-pin flex connectors with a 200mm (20cm) FPC cable included, giving a total extension of about 22cm when the board length is included. Works with 50-pi...

SKU: AF-2098

A 40-pin FPC extension board with an included 200mm flexible flat cable. Adds approximately 22cm of reach (20cm cable plus 2cm board) to devices using 40-pin, 0.5mm pitch FPC/FFC connections such as TFT displays. The board features two 40-pin flex connectors (both bottom-contact type), allowing ...

SKU: SF-CAB-28304 · MPN: CAB-28304

A 22-pin flexible flat cable (FPC) with 0.5mm pitch, 20cm in length. This A-B style cable has matching pin orientation on both ends – pin 1 on one side aligns with pin 1 on the other – making it straightforward to connect cameras, displays, and other peripherals. The flexible design allows for e...

SKU: EF-EF05049

A pack of five RJ11 modular cables with 4P4C (4-position, 4-contact) connectors on each end. Each cable is 200 mm long and provides a four-wire straight-through connection, suitable for connecting sensors and modules that use the RJ11 interface. Key Features 4P4C Connectors – Standard RJ11 plu...

SKU: AF-5386

A 26-pin flexible flat cable (FPC) with 1mm pitch, 20cm in length. FPC cables are ultra-thin and flexible, making them ideal for tight spaces where round cables would be too bulky. This cable is commonly used for connecting laptop floppy drives and other 26-pin peripherals. Key Features 26 Pin...

SKU: RP-SC1128

An adapter cable for connecting Raspberry Pi Camera modules to the Raspberry Pi 5. The Pi 5 uses a smaller 22-way, 0.5mm-pitch "mini" FPC connector for its two four-lane MIPI ports, while current Raspberry Pi cameras use the older 15-way, 1mm-pitch "standard" connector — this cable bridges the tw...

SKU: AF-5810 · MPN: ADA5810

This breakout combines Vishay's VCNL4020 proximity sensor and ambient light sensor on one compact I2C board, making it a handy choice when you want to detect nearby objects and measure light levels at the same time. The proximity sensor works from 0 to 200mm (about 7.5 inches), while the light se...

SKU: AF-1647

This cable will let you swap out the stock 150mm long flex cable from a Raspberry Pi Camera (either 'classic' or 'NoIR' type) or Raspberry Pi Display for a different size. Works great, just carefully open the connector on the Pi and slip this one in.This cable is 200mm long We have cables in 5...

SKU: AF-3922

A 200 mm Molex PicoBlade 2-pin cable with 1.25 mm pitch connectors. The ultra-slim PicoBlade format takes up minimal PCB space while providing a secure friction-lock connection — ideal when standard 0.1" or JST PH connectors are too large. Specifications Connector Type – Molex PicoBlade Pitch...

SKU: AF-4482

These premium male-male jumper wires are handy for making wire harnesses or jumpering between headers on PCBs. They're 200mm (~7.8") long and come loose as a pack of 40 (10 pieces of red, blue, yellow, and Adafruit black). They have 0.1" male header contacts on either end and fit cleanly next to ...

SKU: SF-WRL-20856

A 433MHz antenna that utilizes an SMA connector and is 200mm long with a gain of 2dBi. Comes with the frequency laser printed on the antenna. Features: Frequency: 433MHz Gain: 2dBi Antenna Length: 200mm Connector: SMA Plug Articulating Base Documents: Technical Drawing

SKU: AF-3842

A compact battery holder for three AA cells with an integrated power cable and DC barrel jack. The series configuration delivers approximately 3.6–4.5V depending on battery chemistry, making it a convenient power source for 3.3V microcontroller projects and portable electronics. The 200mm power ...

SKU: AF-4447

These premium female-female jumper wires are handy for making wire harnesses or jumpering between headers on PCBs. They're 200mm (~7.8") long and come loose as a pack of 40 (10 pieces of red, blue, yellow, and Adafruit black). They have 0.1" female header contacts on either end and fit cleanly ne...

SKU: SF-WRL-15114

This cute little coax is a champ in our RF kit! It has a right angle female U.FL (aka I-PEX) connector on both ends. Now instead of jerry-rigging a few U.FL to SMA cables together we can go straight from one U.FL device to another. As an added bonus this coax is the nice stuff - approximately 1mm...

SKU: SF-PRT-28203 · MPN: PRT-28203

  The SparkFun Qwiic 5V Boost simplifies interfacing 5V I2C devices with the 3.3V Qwiic ecosystem. It takes the 3.3V I2C signals and power from its Qwiic connectors and boosts them to 5V, available on the PTH pins. This is perfect for powering peripherals like RGB LEDs or DC fans commonl...