All Products

SKU: DF-DFR0665

The 2.8" IPS TFT LCD Touchscreen is a full-colour display module with integrated resistive touch and a MicroSD card slot. Driven by the ILI9341 display controller and XPT2046 touch controller, it communicates over SPI and works with both 3.3V and 5V logic. The IPS panel provides wide viewing ang...

SKU: SF-COM-28379 · MPN: COM-28379

This colour TFT touchscreen is a compact display module for adding high-resolution graphics to compatible maker projects. It provides a 320x240 pixel display area in a 2.8 inch format, using the ILI9341 controller.The display is recommended for use with Teensy 3.2 through to Teensy 4.1, making it...

SKU: AF-1774

The 2.8" TFT Display with Resistive Touchscreen is a bare LCD module featuring 320×240 resolution with individual RGB pixel control. Driven by the ILI9341 chipset, it supports SPI (3- or 4-wire), 8-bit parallel, and 16-bit parallel interfaces. The resistive touchscreen is an analogue type that r...

SKU: AF-1651

The 2.8" TFT Touch Shield with Resistive Touch Screen plugs directly into any Arduino UNO or Mega-shaped board, providing a bright, full-colour display with touch input and an onboard MicroSD card socket. Fully assembled and ready to use — no wiring or soldering required. This shield uses SPI fo...

SKU: AF-3062

Complete your Pi setup with our custom designed faceplate specifically designed to fit your 2.8" PiTFT and Adafruit Pi B+ / Pi 2 / Pi 3 case base! This Clear Case Base and Faceplate and Buttons Combo Pack is a simple way to enclose your 2.8" PiTFT and Pi safely and in style...

SKU: EC-DIS04028H

CrowPanel ESP32 Display 2.8-inch SPI module is a powerful HMI touch screen with a 320*240 resolution LCD display. It uses the ESP32-WROOM-32 module as the main control processor, with a dual-core 32-bit LX6 microprocessor, integrated WiFi and Bluetooth wireless functions, a main frequency of up t...

SKU: AF-2090

The 2.8" TFT LCD Breakout Board features a bright, full-colour display with a capacitive single-touch touchscreen and an onboard MicroSD card socket. With 240×320 resolution and individual RGB pixel control, it delivers vivid colour output for interactive projects. The breakout supports two inte...

SKU: WS-19804

The 2.8" Touch Display Module is designed for the Raspberry Pi Pico, featuring a 320×240 IPS screen with 262K colours and a resistive touchscreen. It connects via the onboard female pin header for direct attachment to the Pico — no wiring required. Driven by the ST7789 display controller and XPT...

SKU: AF-1743

A large 3.2" colour TFT LCD breakout board with a built-in resistive touchscreen and a microSD card socket. The 240×320 pixel display is driven by the ILI9341 chipset and features a bright 6-LED white backlight. The breakout board includes 3–5 V level shifters, making it compatible with both 3.3 ...

SKU: EC-AMS320240TFT

The 2.8" TFT Touch Shield V4.3 is an Arduino-compatible display shield featuring a 240×320 colour LCD with a resistive touchscreen and onboard SD card socket. It communicates over SPI, keeping pin usage low and leaving more pins available for other components. Driven by the ILI9341 controller, t...

SKU: AF-4506

The Adafruit 1.3" Colour TFT Bonnet for Raspberry Pi combines a 240×240 IPS TFT display with a 5-way joystick and two pushbuttons on a single plug-and-play bonnet. The display is driven by the ST7789 controller over SPI, delivering vibrant 16-bit colour with wide viewing angles. A Qwiic/STEMMA Q...

SKU: WS-24080

Raspberry Pi 2.8inch LCD expansion module, 240 × 320 resistive touch screen for Raspberry Pi Zero / Zero 2 W Series boards, Works with other POD modules2.8inch LCD Display Module Designed for Raspberry Pi  The POD 2.8inch Resistive Touch Display Module is the 2.8inch LCD expansion ...

SKU: AF-2050

A large 3.5" colour TFT LCD breakout board with a built-in resistive touchscreen and a microSD card socket. The 480×320 pixel display is driven by the HX8357D chipset and features a bright 6-LED white backlight. The breakout board includes 3–5 V level shifters, making it compatible with both 3.3 ...

SKU: AF-1591

This 4.3" TFT display offers a 480×272 pixel resolution with 24-bit colour (8 red, 8 green, 8 blue parallel pins), an LED backlight, and a resistive touchscreen overlay. It's well-suited for projects that need a large display area for graphics or a user interface. This is a raw RGB TTL (pixel-do...

SKU: DF-DFR0649

A 1.54-inch IPS TFT LCD breakout with 240×240 resolution, 16-bit colour (RGB565), and an onboard microSD card slot for storing and displaying images. The ST7789 driver communicates via SPI or DFRobot's GDI interface for plug-and-play connectivity with compatible main controllers. Powered by 3.3–...

SKU: PR-PIM345

Support and protect your PiTFT+ and Raspberry Pi with this stylish and unique case! Features Compatible with Raspberry Pi 3 B+, 3, & 2, but not with the original model B or B+ Custom top layers provided for both the 2.8" 320x240 and the 3.5" 480x320 PiTFT+ variants Protects your beloved ...

SKU: AF-1596

A 5.0-inch TFT display with 800×480 resolution, LED backlight, and a 4-wire resistive touchscreen overlay. The touchscreen adds user input capability for interactive interfaces, menus, and control panels. This is the touchscreen version of the 5.0" 40-pin TFT Display without Touchscreen. This is...

SKU: AF-2354

This 7.0" TFT display packs 800×480 pixels with an LED backlight and a 4-wire resistive touchscreen overlay. With 24-bit colour capability via its 40-pin connector (8 red, 8 green, 8 blue parallel pins), it's ideal for projects requiring a large, interactive display area. This is a raw pixel-dot...

SKU: SF-COM-28380 · MPN: COM-28380

Add a colour touchscreen to your Teensy project with this 3.2 inch TFT display. It provides 320x240 resolution for higher-resolution graphics and uses the ILI9341 display controller.The supplier recommends this display for use with Teensy 3.2 through to Teensy 4.1. It suits projects that need a c...

SKU: SF-KIT-30216 · MPN: KIT-30216

Add camera input and a capacitive touchscreen to an RP2350 RedBoard IoT for machine-vision projects. This kit combines the Red Vision Touch Display for RedBoard with the Red Vision Camera Board - HM01B0 (Color), and is designed for quick setup with no soldering required.The display board plugs di...