All Products

SKU: AF-2460

An ultra-compact passive GPS antenna measuring just 9 × 9 × 6.5 mm, with a 50 mm uFL cable. Ideal for space-constrained projects where a full-size antenna won't fit. Key Features Tiny Form Factor – Only 9 × 9 × 6.5 mm uFL Connector – Standard uFL interface for easy connection to GPS modules ...

SKU: SF-GPS-29204 · MPN: GPS-29204

This low profile ceramic chip antenna from Molex is designed for GPS applications where the antenna needs to be mounted directly on a PCB.It operates across 1.561GHz to 1.602GHz, with a 1.575GHz centre frequency, making it suitable for compact positioning and navigation designs.The antenna uses s...

SKU: SF-GPS-29691 · MPN: GPS-29691

This high-performance multi-band GNSS antenna is designed for applications that need high accuracy and continuous operation. It supports GPS, GLONASS, BeiDou and Galileo constellations across multiple frequency bands, plus L-band correction services.Built to outperform standard patch antennas, it...

SKU: AF-1858

This 2.2"/57mm long antenna has 2dBi of gain and 50Ω impedance so it will work fantastically with just about any 850/900/1800/1900/2100 wireless receiver/transmitter such as any Cellular or GSM/GPRS device. Antenna comes with a Right-angle SMA connector. If you need to connect this to an RP...

SKU: AF-1859

This 2.4"/61mm long antenna has 2dBi of gain and 50Ω impedance so it will work fantastically with just about any 850/900/1800/1900/2100 wireless receiver/transmitter such as any Cellular or GSM/GPRS device. Antenna comes with a SMA connector, which is the most common type you'll see for Cell...

SKU: SF-GPS-00177

This embedded GPS antenna with built-in LNA (Low Noise Amplifier) is designed for small, mobile applications. Its compact, unpackaged form factor makes it ideal for creating truly small GPS prototypes. Comes with a 5-inch cable terminated with a standard male SMA connector. Works well out of the...

SKU: SF-WRL-20855

Designed for 810-910 MHz (868MHz center frequency) this antenna is ideal for distant LoRa nodes. Utilizes an SMA connector and is 200mm long with a gain of 2dBi. Comes with the frequency laser printed on the antenna. Features: Frequency Range: 810-910MHz Center Frequency: 868MHz Gain: 2dBi Ant...

SKU: SF-GPS-22660

The SparkFun Dead Reckoning Breakout SMA - ZED-F9R is a high precision, sensor fusion GPS board with equally impressive configuration options and takes advantage of u-blox's Automotive Dead Reckoning (ADR) technology. The ZED-F9R module provides a highly accurate and continuous position by fusing...

SKU: AF-746

The Adafruit Ultimate GPS Breakout (Version 3) is a high-performance GPS module built around the MTK3339 chipset. With 66 channels, -165 dBm tracking sensitivity, and up to 10 Hz position updates, it delivers accurate and responsive location data for a wide range of projects. Version 3 introduce...

SKU: SF-WRL-14875

A compact 1/4-wave rubber duck antenna for LoRa and other 860–960MHz communication. With a centre frequency of 915MHz and 2dBi gain, this 110mm antenna is ideal for space-constrained LoRa nodes where a smaller antenna is preferred. Specifications Frequency Range – 860–960MHz (centre 915MHz) G...

SKU: SF-GPS-30249 · MPN: GPS-30249

The MAN1216Q50 is the locking version of SparkFun’s multi-band GNSS helical antenna, designed for high-precision L1/L2/L5 reception in compact equipment mounts. It adds a specialised three-screw flange at the base so the antenna can be permanently installed while still connecting via any SMA cabl...

SKU: SF-WRL-20856

A 433MHz antenna that utilizes an SMA connector and is 200mm long with a gain of 2dBi. Comes with the frequency laser printed on the antenna. Features: Frequency: 433MHz Gain: 2dBi Antenna Length: 200mm Connector: SMA Plug Articulating Base Documents: Technical Drawing

SKU: SF-GPS-16838

The M1600HCT-P-SMA is a dual-band passive antenna that combines Iridium satellite communication with L1 GNSS reception (GPS and GLONASS) in a single compact unit. Ideal for tracking devices that transmit their position over the Iridium network. Weighing just 11 grams with a built-in O-ring, the ...

SKU: SF-KIT-23452 · MPN: KIT-23452

Get started with high-precision RTK GNSS and dead reckoning using u-blox's ZED-F9R module. This kit combines a sensor-fusion GPS breakout, a multiband SMA antenna and a USB cable so you have the core hardware needed for a rover setup.The ZED-F9R fuses GNSS measurements with a 3D IMU sensor, wheel...

SKU: SF-WRL-14876

A 1/2-wave 915MHz LoRa duck antenna with 2dBi gain and an RP-SMA connector. Designed for the 860–960MHz band, this 200mm antenna is ideal for extending the range of LoRa nodes and other sub-GHz radio modules. Specifications Frequency Range – 860–960MHz Gain – 2dBi Type – 1/2-wave dipole Con...

SKU: AF-5440

The Adafruit Ultimate GPS Breakout with GLONASS + GPS is an enhanced version of the popular Ultimate GPS, built around the MTK3333 chipset with PA1616D module. It supports both GPS and GLONASS satellite networks, tracking up to 33 satellites on 99 channels for improved coverage and accuracy world...

SKU: SF-WRL-09143

A 900/1800MHz dual-band duck antenna with 2dBi gain and an RP-SMA connector. Well suited for XBee 900MHz modules and other 900MHz radio applications. 50-ohm impedance, 105mm long. Specifications Frequency – 900/1800MHz dual-band Gain – 2dBi Connector – RP-SMA Impedance – 50 ohm Length – 10...

SKU: AF-2542

The Adafruit FONA 808 combines 2G cellular connectivity with integrated GPS tracking in a compact 1.75 × 1.6-inch breakout. Built around the SIM808 module with an MT3337 GPS chipset, it provides voice calling, SMS, GPRS data, and GPS geolocation — all controlled over a single serial port via AT c...

SKU: SF-GPS-29203 · MPN: GPS-29203

This compact cube antenna from Molex is designed for GPS applications and surface mounting directly to a PCB. It covers a frequency range of 1.556GHz ~ 1.607GHz, making it suitable for embedded positioning projects where a low-profile board-mounted antenna is required.Electrical connectivity is v...

SKU: SF-GPS-29206 · MPN: GPS-29206

This compact Molex molded GPS antenna is a surface-mount option for adding satellite reception to space-constrained PCB designs. It measures just 3 x 5 x 4mm and is designed for operation across a 1561 - 1602 MHz frequency range.The antenna is a monopole type made from LDS material, with a 4x6mm ...