All Products

SKU: AF-1785

A medium surface transducer that turns any flat surface — tables, walls, panels — into a speaker. Unlike traditional cone speakers, a voice coil wrapped around a metal rod causes vibration that transfers directly to the surface it's pressed against, producing surprisingly clear sound from the sur...

SKU: AF-4445

A compact 2.8" × 1.2" enclosed mono speaker delivering clear audio output at 3W and 4 ohm impedance. The sealed enclosure provides improved sound quality and volume compared to bare speaker drivers of a similar size. This speaker comes with plain bare wires (no connector), making it easy to sold...

SKU: AF-1314

A 3-inch (76.2 mm) speaker cone with 4 Ω impedance and 3 W power handling. Four mounting tabs spaced 60 mm apart make it easy to secure in enclosures or project housings. Pairs well with Class D amplifier boards for compact audio projects. Specifications Diameter: 3″ (76.2 mm) Impedance: 4 Ω ...

SKU: AF-1552

This incredibly small stereo amplifier is surprisingly powerful - able to deliver 2 x 2.1W channels into 4 ohm impedance speakers (@ 10% THD). Inside the miniature chip is a class D controller, able to run from 2.7V-5.5VDC. Since the amp is a class D, it's incredibly efficient (89% efficient when...

SKU: AF-5396

The Adafruit VL53L4CD is a Time-of-Flight (ToF) distance sensor from ST that combines short-range and medium-range sensing in one chip. It measures from approximately 1 mm right up to 1300 mm, bridging the gap between the close-range VL6180X and the longer-range VL53L0X — all using an invisible l...

SKU: AF-1712

A mini class D with AGC and I2C control? Yes please! This incredibly small stereo amplifier is surprisingly powerful. It is able to deliver 2 x 2.8W channels into 4 ohm impedance speakers (@ 10% THD) and it has a i2c control interface as well as an AGC (automatic gain control) system to keep your...

SKU: AF-3397

The Optomax is an optical liquid level sensor that detects the presence or absence of almost any liquid — oil or water based. Inside the polysulfone housing, an infrared LED and matching phototransistor work together: when dry, the IR light reflects internally back to the sensor; when the tip is ...

SKU: SF-GPS-28139 · MPN: GPS-28139

The SparkPNT GNSS Flex Module delivers centimetre-level RTK positioning using the Quectel LG290P receiver with quad-band support (L1, L2, L5, E6/L6) and multi-constellation tracking across GPS, GLONASS, Galileo, BDS, QZSS, and NavIC. With a built-in NIC anti-jamming unit and 1,040 tracking channe...

SKU: AF-2324

The Adafruit Ultimate GPS HAT adds high-quality GPS and GLONASS positioning to your Raspberry Pi. Built around a PA1616D module, it provides precise location data and a built-in real-time clock (RTC) with coin cell backup — perfect for outdoor projects, time synchronisation, and location-aware ap...

SKU: EC-SEE00804D

The All-in-one Starter Kit for ESP32-P4 is a complete learning platform built around Espressif's ESP32-P4, a high-performance 32-bit RISC-V dual-core microprocessor with powerful image and voice processing capabilities. It integrates 16 common sensor modules on a single circuit board, eliminating...

SKU: SF-SEN-12909

This is the MS5803-14BA Pressure Sensor Breakout, a high resolution pressure sensor with both an I2C and SPI interface. This MEMS pressure sensor measures the absolute pressure of the fluid around it which includes air, water, and anything else that acts like a viscous fluid. Depending on how you...

SKU: DF-SEN0371

The BMP388 Digital Pressure Sensor Module is a high-accuracy barometric pressure and temperature breakout based on the Bosch BMP388. It offers significantly improved performance over its predecessors (BMP180, BMP280) with lower power consumption, higher resolution, and faster sampling — making it...

SKU: AF-1207

The Adafruit SMT Breakout PCB for 16-pin SOIC or TSSOP packages lets you easily prototype with surface-mount chips on standard solderless breadboards. One side accommodates a 16-pin TSSOP footprint while the other supports 16-pin SOIC (narrow, medium, or wide), with traces routed to two rows of 0...

SKU: AF-1208

The Adafruit SMT Breakout PCB for 28-pin SOIC or TSSOP packages lets you easily prototype with surface-mount chips on standard solderless breadboards. One side accommodates a 28-pin TSSOP footprint while the other supports 28-pin SOIC (narrow, medium, or wide), with traces routed to two rows of 0...

SKU: SF-SEN-09088

This is a very small light sensor. A photocell changes (also called a photodetector, photo resistor, CdS or photoconductive cell) resistance depending on the amount of light it is exposed to. These little sensors make great ambient light triggers (when light in the room turns on, do something).Fe...

SKU: SF-SEN-08606

A simple flex sensor 4.5" in length. As the sensor is flexed, the resistance across the sensor increases. Patented technology by Spectra Symbol - they claim these sensors were used in the original Nintendo Power Glove. I love the Nintendo Power Glove. It’s so bad! The resistance of the flex se...

SKU: M5-U037

The M5CameraF is a compact ESP32-based camera module featuring a 2-megapixel OV2640 sensor with a 160° fish-eye lens. With built-in Wi-Fi and Bluetooth, it streams images over a wireless connection and can be programmed via USB Type-C. The module includes 4 MB flash, 4 MB PSRAM, and comes preload...

SKU: DF-DFR1083 · MPN: DFR1083

##Introduction The Arduino Portenta C33 is a streamlined module that offers the high performance of the Arduino Portenta family at a lower price point, thanks to optimizations and streamlined features. Ideal to developing cost-effective, real-time applications, the Portenta C33 features the ARM® ...

SKU: SF-WRL-28896 · MPN: WRL-28896

  The RockBLOCK 9704 by Ground Control is a breakout board for the new Iridium 9704 including a built-in patch antenna and a supercap charger to enable low power operation. If you need low data rate connectivity over the entire globe, Iridium is the answer. RockBLOCK 9704 leverages the I...

SKU: SF-SEN-21210

The GT-NUCL1633K1 is the latest miniature fingerprint sensor with extensive enhancements on power consumption and user flexibility from ADH-Tech. It allows 360-degree rotation, which enables maximum performance without compromising on design aesthetics. It even works well in less than ideal co...