All Products

SKU: DF-DFR0058

This Arduino Rotation Potentimeter Sensor is a multi-ring rotation sensor. It is based on multi-turn precision potentiometer. It can rotate upto 10 laps. The voltage can be subdivided into 1024 copies. This sensor provides a more accurate reading. This is sensor can also be used as a simp...

SKU: DF-DFR0305

The Romeo BLE is an all-in-one Arduino-compatible robot control board from DFRobot with integrated Bluetooth 4.0. It combines an ATmega328P microcontroller, a dual-channel DC motor driver (2 A max), and a TI CC2540 BLE chip in a single board — letting you build and wirelessly control robots witho...

SKU: EC-CNRF24L01I

This is a platform using the ATMEGA48 to help you using the NRF24L0 Module easily. It uses the I2C (TWI) communication protocol to communicate with other controller such as the Arduino thus to simplify the NRF24L01 communication. With this module, you do not need to understand the tedious communi...

SKU: DF-KIT0131 · MPN: KIT0131

Build a DIY water quality monitor for field studies, teaching or environmental projects with the KnowFlow Basic Kit. This Arduino-based kit measures two key water parameters: pH and electrical conductivity (EC).Data can be recorded automatically to a micro-SD card for later analysis, and the Blun...

SKU: DF-DFR0072

At sometime or another you may run out of pins on your Arduino board and need to extend it with shift registers.  With this shift out module which is based on 74HC595. The datasheet refers to the 74HC595 as an "8-bit serial-in, serial or parallel-out shift register with output latches; 3-sta...

SKU: DF-DFR0012

The Arduino Nano I/O Sensor Shield acts as an expansion board for the Arduino Nano and DFRduino Nano microcontrollers. There are several different options for power input. The form factor of the Nano I/O Shield board is the same as the Arduino UNO/arduino Leonardo. In addition, the sensor shi...

SKU: DF-DFR0165

Say goodbye to messy cables and clueless pluging/unpluging! This Sensor Shield is a powerful expansion shield for Arduino Mega Due. It is large enough to carry up to 3 Xbee slots, 1 microSD slot and shield headers for most Arduino shields on the market. Besides, we also added a prototyping ar...

SKU: DF-DRI0023

INTRODUCTION Do you want to do some projects with stepper motors such as a drafting instrument, a 3D printer, an auto curtain......? As we all know, regular stepper motors are hard to drive, but with this stepper motor shield, you can easily drive 2 stepper motors vi...

SKU: DF-DFR0028

This is an arduino tilt sensor. It is used to detect orientation. Inside the sensor, there is a ball that make contact with the pins when the case is upright. Tilt the sensor over and the balls don't touch, thus not making a connection. Here is the principle of tilt sensor to illustrate how i...

SKU: DF-DFR0008

The upgraded Arduino Input Shield includes a two axis mini joystick (with moment switch) as well as four colored push buttons(Red,Yellow,Blue,Green). The reserved APC220 Radio Data Module(SKU:TEL0005) interface and the Xbee interface is deisgned to facilitate the realization of wireless ro...

SKU: DF-DFR0258

This RS232 Shield For Arduino is designed for the Arduino controller,and it can easily convert UART to RS232 interface. The RS232 shield integrates DB9 connectors (female) that provide connection to various devices with RS232 interface. Also the RS232 shield headers will facilitate your co...

SKU: DF-DFR0272

An Arduino-compatible Ethernet shield based on the Wiznet W5200 chip, providing a simple way to connect your Arduino to a network. It plugs directly onto an Arduino Uno or Mega 2560 and supports stacking additional shields on top. An aluminium alloy heatsink is fitted to the W5200 chip for therma...

SKU: DF-DRI0027

Some day,a guy want to make a robotic dog as a gift to his little son.He brought some digital servos, a microcontroller,Lipo batterys...Then he found it hard to drive these smart servos with Arduino processor! So we developed a driver board that can easily & quickly drive the digital servo...

SKU: PL-2510

Overview A Zumo robot preparing to attack a Parallax SumoBot. Zumo Robot for Arduino, v1.2. This Zumo robot is a low-profile tracked robot platform intended for use with an Arduino (or compatible device, such as an A-Star 32U4 Prime) as its main controller. It measures less than 10 ...

SKU: DF-KIT0150

Go interactive with your applications with this new sensor kit! 37 sensors are included in one kit, which definitely gives you a bigger bang for your buck.In the version of this sensor kit, we add more sensor modules like, color sensor, digital wattmeter, heart rate monitor sensor, conductivity s...

SKU: PL-5030

The Motoron M3S256 Triple Motor Controller Shield for Arduino makes it easy to control DC motors from an Arduino or Arduino-compatible board through an I²C interface. Each module can independently control up to three motors, and multiple shields can be stacked on top of the same Arduino for proje...

SKU: DF-KIT0111

The Gravity Starter Kit for Arduino is a plug-and-play electronics toolkit designed for beginners and makers getting started with the Arduino platform. It includes a DFRduino UNO R3 microcontroller (fully compatible with Arduino UNO) along with 12 popular sensors and components from DFRobot's Gra...

SKU: DF-FIT0219

The Interface Cable SMA to U.FL is a connector cable that interfaces U.FL RF connectors to regular SMA connections. APPLICATIONS Connect Standard SMA Connector for SIM 908 GPS/GPRS/GSM Shield For Arduino SPECIFICATIONS Frequency Range:DC~12.4GHz VSWR:≤1.10+0....

SKU: DF-TEL0124

The SIM7600CE-T 4G(LTE) Shield is a compact 4G/3G/2G communication and GNSS positioning module in an Arduino-compatible shield form factor. About the size of a credit card, it plugs directly into Arduino UNO, Leonardo, Mega, and similar boards. Supporting LTE CAT-4 with up to 150 Mbps downlink a...

SKU: AF-1982

The Adafruit MPR121 Capacitive Touch Sensor Breakout provides 12 channels of capacitive touch sensing over I2C. The MPR121 handles all the capacitive filtering internally and can be configured for varying sensitivity levels, making it far easier to use than raw analog capacitive sensing. With fo...