All Products

SKU: AF-2328

Adafruit DotStar LED strips use 2-wire SPI instead of the single-wire protocol used by NeoPixels, allowing much faster data rates (up to 32 MHz) and a 20 KHz PWM refresh rate. This makes DotStars ideal for persistence-of-vision (POV) projects and smooth, flicker-free animations — especially at lo...

SKU: AF-3444

The Adafruit DotStar High Density 8×8 Grid packs 64 individually addressable RGB LEDs into a compact 25.4 mm × 25.4 mm (1" × 1") square. Each DotStar pixel features a built-in PWM driver and is controlled via a 2-wire SPI interface using just two digital I/O pins — data and clock. Each LED deliv...

SKU: AF-2435

The Adafruit DotStar APA102 Warm White LED Strip (30 LED/m, ~3000K) uses the same integrated DotStar driver as the RGB strips but with dedicated warm white phosphor LEDs. The result is an incredibly bright, consistent warm white light — far superior to mixing RGB to approximate white. Controlled...

SKU: AF-2433

The Adafruit DotStar APA102 Cool White LED Strip (60 LED/m, ~6000K) uses the same integrated DotStar driver as the RGB strips but with dedicated cool white phosphor LEDs. The result is an incredibly bright, consistent white light — far superior to mixing RGB to approximate white. Controlled via ...

SKU: AF-2436

The Adafruit DotStar APA102 Warm White LED Strip (60 LED/m, ~3000K) uses the same integrated DotStar driver as the RGB strips but with dedicated warm white phosphor LEDs. The result is an incredibly bright, consistent warm white light — far superior to mixing RGB to approximate white. Controlled...

SKU: AF-2434

The Adafruit DotStar APA102 Cool White LED Strip (144 LED/m, ~6000K) uses the same integrated DotStar driver as the RGB strips but with dedicated cool white phosphor LEDs. The result is an incredibly bright, consistent white light — far superior to mixing RGB to approximate white. Controlled via...

SKU: AF-2432

The Adafruit DotStar APA102 Cool White LED Strip (30 LED/m, ~6000K) uses the same integrated DotStar driver as the RGB strips but with dedicated cool white phosphor LEDs. The result is an incredibly bright, consistent white light — far superior to mixing RGB to approximate white. Controlled via ...

SKU: AF-2242

The Adafruit DotStar Digital LED Strip (144 LED/m, white flex PCB) delivers superior performance over traditional NeoPixels with its 2-wire SPI interface. Push data at up to 32 MHz clock speed with no critical timing requirements, making it compatible with virtually any microcontroller or micropr...

SKU: AF-2238

The Adafruit DotStar Digital LED Strip (30 LED/m, white flex PCB) delivers superior performance over traditional NeoPixels with its 2-wire SPI interface. Push data at up to 32 MHz clock speed with no critical timing requirements, making it compatible with virtually any microcontroller or micropro...

SKU: AF-2329

The Adafruit DotStar Digital LED Strip (144 LED/m, white flex PCB) delivers superior performance over traditional NeoPixels with its 2-wire SPI interface. Push data at up to 32 MHz clock speed with no critical timing requirements, making it compatible with virtually any microcontroller or micropr...

SKU: AF-2237

The Adafruit DotStar Digital LED Strip (30 LED/m, black flex PCB) delivers superior performance over traditional NeoPixels with its 2-wire SPI interface. Push data at up to 32 MHz clock speed with no critical timing requirements, making it compatible with virtually any microcontroller or micropro...

SKU: AF-1004

These ingenious little clips make it easier than ever to use our analog RGB LED strips - no need to solder! The clips snap onto the ends of the LED strip and hold securely. They're not waterproof but you could cover them in heat-shrink to make them weatherproof.You get one piece of three differen...

SKU: AF-3587

These incredibly small surface-mount LEDs are an easy way to add a lot of very tiny (but bright!) colorful dots to your project. They're mini versions of our digital DotStart strips and matrices with full chainable 2-wire control. They are just mind-bogglingly small. They are a mere 2mm x...

SKU: AF-3341

These incredibly small surface-mount LEDs are an easy way to add a lot of very tiny (but bright!) colorful dots to your project. They're mini versions of the ones in our digital DotStart strips and matrices with full chainable 2-wire control. They are just mind-bogglingly small. They are ...

SKU: SF-COM-24838 · MPN: COM-24838

This APA102C, also known as DotStar, is a 5050-sized SMD addressable RGB LED for adding bright, colourful lighting to custom boards and compact projects.It has an integrated control circuit embedded inside the LED package, with the tiny controller chip and gold bond wires visible if you look clos...

SKU: AF-6358 · MPN: ADA6358

Build large, colourful HUB75 RGB LED matrix displays from a Raspberry Pi without the usual jumper-wire tangle. This Adafruit Bonnet plugs onto the 40-pin GPIO header and drives three parallel matrix strings using the active3 pinout, so it can handle roughly three times as many panels or pixels as...

SKU: AF-3500

The Adafruit Trinket M0 is a tiny but powerful microcontroller board built around the ATSAMD21E18 32-bit Cortex M0+ processor. It shares the same compact form factor and pinout as the original Trinket, but with a massive upgrade in processing power, memory, and connectivity — including native USB...

SKU: AF-3501

The Adafruit GEMMA M0 is a tiny, coin-sized microcontroller board designed for wearable electronics and small projects. Despite its quarter-sized footprint, it packs serious power with an ATSAMD21E18 32-bit Cortex M0+ processor, 256 KB of Flash, and 32 KB of RAM — a massive upgrade over the origi...

SKU: AF-1902

The SmartLED Shield (V4) provides a simple, solder-free way to connect a Teensy 3.2, Teensy 3.5, or Teensy 3.6 to HUB75 RGB LED Matrix Panels. Just plug in your Teensy, connect your panel, and start displaying graphics, patterns, or animated GIFs using the SmartMatrix Library. The shield include...

SKU: AF-2350

These APA102 (DotStar) warm white LEDs feature an integrated driver chip inside each 5050 SMD package, giving you individually addressable brightness control over three warm white (~3000K) dies. The phosphor coating produces a consistent, diffused warm light that looks far better than mixing RGB ...