All Products

SKU: SF-PRT-10588

Simple breakout board for the 3.5mm audio jack. Use this breakout (shipped bare) to allow breadboard or SIP access to the super-common 3.5mm audio jack. All five pins are broken out.

SKU: SF-PRT-08032

Low profile 3.5mm stereo audio jack.Documents:Audio 3.5mm Jack Datasheet

SKU: AF-4384

This audio adaptor lets you easily add high quality 16 bit, 44.1 kHz sample rate (CD quality) audio to your projects with Teensy 4.0 (Rev D). It supports stereo headphone and stereo line-level output, and also stereo line-level input or mono microphone input. The Teensy Audio Library lets...

SKU: AF-3537

Do you have a S-Video display, projector or monitor that is not compatible with your HDMI devices? Here's an adapter that will allow you to convert HDMI to S-Video, for older video devices that might not have an HDMI input. S-Video has better performance than plain "RCA" composite NTSC/PAL a...

SKU: AF-3535

A VGA to HDMI converter that takes an analogue VGA video signal and 3.5 mm stereo audio input and combines them into a digital HDMI output. Ideal for connecting older VGA-output computers, game systems, or other devices to modern HDMI monitors, televisions, and projectors. The adapter is powered...

SKU: AF-876

This basic cable comes with two 3.5mm (1/8" headphone jack size) stereo connectors. It's fairly straight forward, you'll commonly need these to connect two audio devices together. Cable is 6 ft long.

SKU: DF-DFR0064

The DFRobot 386AMP audio amplifier module is based on the LM386 low-voltage audio power amplifier IC. With a fixed voltage gain of 26 dB (20× amplification) and static power consumption of only 24 mW at 6V, it's well suited for battery-powered applications. Connect a microphone, MP3 module, or o...

SKU: DF-TEL0108

This Bluetooth audio receiver module supports wireless streaming, USB flash drive, and TF (microSD) card playback. It decodes MP3, WMA, WAV, and lossless FLAC audio formats, with a built-in pre-amp output capable of driving headphones or a small 3 W speaker directly. Powered by 5 V DC via Micro-...

SKU: SF-PRT-12639

A 3.5mm TRRS (tip, ring, ring, sleeve) audio jack in a surface-mount package. Unlike standard stereo TRS connectors, TRRS provides three conductors plus ground, allowing it to carry stereo audio along with an additional channel — commonly used for microphone input on hands-free headsets or video ...

SKU: SF-BOB-11044

This tiny audio amplifier is based on the Texas Instruments TPA2005D1. Its efficient class-D operation means low heat and long battery life. It can drive an 8-Ohm speaker at up to 1.4 Watts; it won’t shake a stadium, but it will provide plenty of volume for your audio projects. The fully-differ...

SKU: SF-COM-11143

This is a simple 3.5mm TRS stereo audio jack with a screw-on plastic shroud. These are great for projects that plug into headphone jacks. Stereo plugs can also be used for carrying serial comm connections!  The outer shell unscrews to reveal solder terminals on the inside of the plug. Sol...

SKU: SF-COM-11144

A ¼″ (6.35mm) stereo audio jack in a right-angle panel-mount configuration. Switched contacts allow you to detect whether a plug is inserted. The jack mounts in an 11mm diameter panel hole and includes a plastic washer and nut for secure installation. Key Features Type – ¼″ (6.35mm) stereo TRS...

SKU: SF-CAB-11580

TRRS connectors are the 3.5mm audio-style connectors that you see on some phones, MP3 players and development boards. TRRS stands for “Tip, Ring, Ring, Sleeve,” which reflects the fact that, unlike a standard stereo connector, this actually has three conductors and a ground. Some devices use the ...

SKU: AF-2881

An A/V RCA cable designed for the Raspberry Pi 3, 2, A+ and B+. Connect the 3.5 mm TRRS jack to your Pi and the RCA plugs to any composite video and stereo audio display or TV. Key Features Correct TRRS Wiring – Pinout is Left, Right, Ground, Video — designed for Raspberry Pi composite output ...

SKU: AF-2914

A 3.5 mm (1/8") 4-pole TRRS audio plug with screw terminal connections — no soldering required. Use stranded or solid-core wire and a small screwdriver to create custom audio cables, breakouts, and test leads. TRRS stands for Tip, Ring, Ring, Sleeve, providing four contacts: three signal lines a...

SKU: AF-2915

A 3.5 mm (1/8") 4-pole TRRS audio jack with screw terminal connections — no soldering required. Use stranded or solid-core wire and a small screwdriver to create custom audio wiring jigs, breakouts, and test setups. TRRS stands for Tip, Ring, Ring, Sleeve, providing four contacts: three signal l...

SKU: AF-2792

One truth about working with A/V is you always need the cable or adapter you don't have in your toolbox. That's why we love these terminal-block RCA connectors so much. No soldering required! Use stranded or solid core wire and a small screw driver to create custom wiring jigs. This is the RC...

SKU: AF-2793

One truth about working with A/V is you always need the cable or adapter you don't have in your toolbox. That's why we love these terminal-block RCA connectors so much. No soldering required! Use stranded or solid core wire and a small screw driver to create custom wiring jigs. This is the RCA...

SKU: AF-2790

A 3.5 mm (1/8") stereo (TRS) audio plug with screw terminal connections — no soldering required. Use stranded or solid-core wire and a small screwdriver to create custom audio cables, breakouts, and test leads. This is the most common size and style of audio connector, used in headphones, speake...

SKU: DF-DFR0126

This Audio Analyzer module features the MSGEQ7 graphic equalizer display filter.It will give your arduino ears. Sound is broken down into seven frequency bands and the peak level for each band can be read. The seven frequencies measured are as follows: 63Hz, 160Hz, 400Hz, 1kHz, 2.5kHz, 6.25kHz a...