All Products
Showing 1-16 of 16 products · 3 unavailable products hidden
JST-SH Horizontal 4-Pin SMD Connector - 1.0mm Pitch
·
This tiny four-pin connector is a compact option when you need a very small board-to-cable connection. It uses the smaller JST-SH style rather than the larger JST connectors commonly found on many breakout boards.The connector has a horizontal orientation and is intended for surface-mount install...
Adafruit PiCowbell DVI Output for Pico - Works with HDMI Display
The Adafruit PiCowbell DVI Output for Pico lets you drive an HDMI monitor or television directly from a Raspberry Pi Pico or Pico W. It features a mini HDMI connector and outputs DVI-compatible digital video — just plug in a standard mini-HDMI-to-HDMI cable and start displaying graphics. Note tha...
JST SH 4-pin Right Angle Connector (10-pack) - Qwiic Compatible
·
A 10-pack of JST SH 4-pin right-angle connectors with 1 mm pitch through-hole mounting tabs. These are the standard connectors used with the Qwiic and STEMMA QT ecosystems, making it easy to add I2C connectivity to your own PCB designs. The solid plastic housing accepts standard Qwiic cables, an...
JST PH 4-pin Horizontal Connector (10-pack)
·
Designing boards with plug-n-play connectivity is a snap, with STEMMA connectors. Here's a pack of 10 of our favorite 2mm pitch connector - the JST PH 4 pin. These are the horizontal style. You can use these with any of our JST PH 4 / STEMMA cables. They're not STEMMA QT compatible (those...
Adafruit Proto Under Plate PiCowBell for Pico
·
The Adafruit Proto Under Plate PiCowbell is a single-slot prototyping base for the Raspberry Pi Pico or Pico W. It provides a reset button, a STEMMA QT / Qwiic connector, a prototyping grid, and double-row socket headers — all with no soldering required when used with a Pico H or Pico WH. The do...
Adafruit Proto Doubler PiCowbell for Pico and PicoW
·
The Adafruit Proto Doubler PiCowbell gives your Raspberry Pi Pico or Pico W two side-by-side socket slots — plug in your Pico on one side and a PiCowbell accessory on the other, no soldering or stacking headers required. It also adds LiPo battery charging, a power switch, reset button, STEMMA QT ...
Adafruit Proto Tripler PiCowbell for Pico and PicoW
·
The Adafruit Proto Tripler PiCowbell gives your Raspberry Pi Pico or Pico W three side-by-side socket slots — plug in your Pico and up to two PiCowbell accessories with no soldering or stacking headers required. It also includes LiPo battery charging, a power switch, reset button, STEMMA QT conne...
Adafruit Pixel Trinkey - USB Key for NeoPixel / DotStar Driving
·
The Adafruit Pixel Trinkey is a tiny USB microcontroller board purpose-built for driving NeoPixel (WS2812, SK6812) and DotStar (APA102) addressable LEDs directly from your computer. It plugs into any USB-A port and provides screw terminal connections for solder-free wiring to your LED strips, rin...
Adafruit PiCowbell Proto for Pico - Reset Button & STEMMA QT
The Adafruit PiCowbell Proto is a prototyping add-on board for the Raspberry Pi Pico and Pico W. It matches the Pico's footprint and sockets underneath, giving you a reset button, a STEMMA QT / Qwiic I2C connector, and a grid of prototyping pads — everything you need to quickly wire up custom cir...
Adafruit Feather RP2350
·
The Adafruit Feather RP2350 brings the powerful RP2350 microcontroller to the classic Feather form factor, giving you full compatibility with the entire FeatherWing ecosystem. With dual Cortex-M33 cores running at 150 MHz, 520 KB of SRAM, and 8 MB of flash, this board delivers roughly twice the p...
Adafruit Feather RP2350 with HSTX Port and 8MB PSRAM
·
The Adafruit Feather RP2350 with HSTX Port and 8 MB PSRAM is the upgraded variant of the Feather RP2350, featuring a pre-soldered AP6404L 8 MB PSRAM chip for managing large data buffers, display framebuffers, and memory-intensive applications directly in mappable RAM. Combined with dual Cortex-M3...
Adafruit PiCowbell CAN Bus for Pico - MCP2515 CAN Controller
The Adafruit PiCowbell CAN Bus adds CAN bus connectivity to your Raspberry Pi Pico or Pico W, making it easy to interface with automotive, robotics, and industrial sensor networks. Built around the popular MCP2515 CAN controller and TJA1051/3 transceiver, it communicates over SPI and supports bot...
JST SH 4-pin Vertical Connector (10-pack)
·
A 10-pack of JST SH 4-pin vertical connectors with 1 mm pitch through-hole mounting tabs. These micro connectors are compatible with the Qwiic/STEMMA QT ecosystem, making them perfect for adding I²C connectivity to custom PCBs. The solid plastic housings feature through-hole pins that can also b...
Adafruit PiCowbell Adalogger for Pico - MicroSD, RTC & STEMMA QT
The Adafruit PiCowbell Adalogger is a Pico-sized add-on board that sockets underneath your Raspberry Pi Pico or Pico W, adding a microSD card slot, real-time clock with battery backup, and a STEMMA QT connector for I2C sensors — everything you need for data logging projects. The PCF8523 RTC keep...
Adafruit Metro RP2040
The Adafruit Metro RP2040 brings the Raspberry Pi RP2040 dual-core processor to the standard Metro/UNO shield-compatible form factor. With 16 MB of QSPI flash, a microSD card slot, USB-C, and a rich set of debugging ports, this board is an excellent platform for CircuitPython, Arduino, MicroPytho...
Adafruit Terminal PiCowbell for Pico with Pre-Soldered Sockets
·
The Adafruit Terminal PiCowbell with Pre-Soldered Sockets gives your Raspberry Pi Pico or Pico W instant plug-and-play access to every GPIO pin via screw terminal blocks. Simply plug in your Pico and connect 18–26 AWG solid or stranded core wires to any of the 40 terminal blocks — one for each pi...
